Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_68552_2Bid Award Id
ViewTender No
S.E.Ctc.(RandB)3/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth work in excavation of foundation trenches in oridinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3 m in depth and the earth tranported by transport vehicle as directed by the Engineer in charge
579.15
-
137.37
Filling foundation and plinth with good quality river sand with watering and ramming incluing cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge
391.07
-
274
Cement concrete (1:4:8) in foundation and plinth using 25mm to 40mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
65.3
-
4170.8
Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
212.49
-
4525.2
Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
54.6
-
5844.1
RCC work of M-25 Grade with 20mm size crusher broken granite metal mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column base and Pile cap
124.7
-
5228.3
Grade Beam
12.84
-
5580.4
Plinth Beam
37.17
-
5580.4
Column GF
56.25
-
10851.5
1st floor
55.72
-
12088.2
2nd floor
1.66
-
13568.2
Roof Beam GF
48.76
-
10851.5
1st floor
29.67
-
12088.2
2nd floor
1.77
-
13568.2
Lintel GF
7.94
-
8719.2
1st floor
2.32
-
9529.5
2nd floor
0.09
-
10497.8
Roof slab GF
90.01
-
9307.8
1st floor
74
-
10235.9
Head Room
2.52
-
11345.4
1st floor slope roof
2.9
-
11172.4
RCC Wall GF
11.29
-
9405.3
1st floor
1.94
-
10352.8
RCC Staircase GF
2.96
-
10375
1st floor
2.96
-
11516.5
Shelves GF
14.04
-
888.5
Chajja GF
16.07
-
795.4
1st floor
2.97
-
893.8
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
560.66
-
7681.2
1st floor
224.98
-
7704.4
2nd floor
8.39
-
7728.9
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor in Foundation and Plinth
27.45
-
4163.2
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
160.96
-
4196.2
1st floor
139.96
-
4455.77
2nd floor
15.11
-
4754.28
12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
4505.73
-
133.5
1st floor
2401.07
-
138.9
2nd floor
82.54
-
144.6
16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge (GF)
2419.38
-
190.9
1st floor
633.84
-
195.7
2nd floor
64.76
-
200.7
Wall painting two coats with 100% Plastic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. (Priming and painting)
5977.15
-
134.1
1st floor
4831.54
-
139
2nd floor
104.09
-
144.3
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) interior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bound primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. (Putty, priming and painting)
2890.05
-
205.6
1st floor
1742.33
-
209.9
2nd floor
66.75
-
214.3
Providing well dressed seasoned sal wood choukaths including cost, conveyance, taxses, cost of all labour, T&P etc complete as per specification and direction of Engineer in charge
1.81
-
50517.3
Supplying and Proviiding of 32mm thick flush door shutters made out of 30mm thick solid core type Block Board as per IS-2202 with 1mm thick approved laminated and 5mm thick vision panel of 6"x9" with teak wood beading and door closure with cost of materials and labour etc complete as per specification and direction of Engineer in charge
110.61
-
7421.4
Painting 2 coats with any enamel paint on new wood work including cost of paint in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.
60.43
-
189.2
Providing and fixing factory made uPVC white coloured sliding glazed window/Ventilators upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. 2 track 2 pannel sliding window
33.22
-
5685
3 track / 3 pannels sliding window with fly proof wire mesh of required size in all floors
415.63
-
7584
Supplying, fitting & fixing in all floors of M.S.grills for door and window and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost For Window/ Ventilator
11017.57
-
58.1
Gate
495.26
-
59.6
Painting 2 coats with any enamel paint on new iron work including cost of paint in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.
2900.1
-
132.7
Providing fitting and fixing of Vitrified tiles ofsize (600x600)mm in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge (G,F)
454.9
-
927.3
1st floor
203.25
-
936.9
Providing fitting and fixing ofVitrified tiles (600x600mm) in dadoos and skirting and risers of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
16.18
-
943.5
1st floor
262.08
-
957.9
Providing fitting and fixing of Granite tiles in floors above 0.40 sqm 20mm thick) of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge (G,F)
1131.07
-
1946.2
1st floor
30.66
-
1955.8
Providing fitting and fixing of Granite tiles in ( above 0.40 sqm. 20mm thick)dadoos and skirting and risers of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
839.23
-
2045.8
1st floor
47.84
-
2060.3
Providing fitting and fixing of Glazed tiles (300x300/ 300x600mm) in dadoos and skirting and risers of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
42.59
-
686.6
Providing fitting and fixing of Cement Concrete tiles in floors, treads or steps and landing of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
11.83
-
980.4
Providing, Fitting & Fixing of Stainless steel in Clamps of required size and shape for anchoring stone wall lining to the backing in C.M(1:2)of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge.
294.05
-
537
Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge.
856.67
-
248.5
2.5cm thick grading concrete of proportion (1:2:2) over roof slab using 4.7mm size chips of approved quality including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge 3rd flioor
609.21
-
284.9
4cm thick grading concrete of proportion (1:2:4) over roof slab using 12mm and downgraded size chips of approved quality including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge 3rd flioor
3558.06
-
532.06
Structural steel work reveted bolted or welded in Built up sections, tracks etc. complete as per specification and direction of Engineer in charge.
2785.59
-
77
Providing and laying water proofing treatment on roof slabs etc. complete as per specification and direction of Engineer in charge.
609.21
-
362
Treatment of existing masonary using chemical emulsion one litre per hole at 300mm internal etc. complete as per specification and direction of Engineer in charge.
1805
-
17
Providing and fixing of false ceiling at all height, fullly perforated Gypsum Plaster board etc. complete as per specification and direction of Engineer in charge.
540.64
-
1074
Providing and fixing wooden ceiling at all heights made out of 12mm ply BWP grade with 4mm thick etc. complete as per specification and direction of Engineer in charge.
794.88
-
6800
Providing and fixing of false ceiling at all height with 8mm thick calcium silicate Board made with callcurrous and silicous etc. complete as per specification and direction of Engineer in charge.
46.74
-
910
Designing, printing, pasting of wall paper etc. complete as per specification and direction of Engineer in charge.
126.54
-
1050
Providing and fixing of panelling on wall made over 19mm ply grid at 450mm C/C including 12mm ply and 4mm thick veenering etc. complete as per specification and direction of Engineer in charge.
439.68
-
6800
Supplying and fixing of 08 seater Dinning table of size 232.92x117.5x75cm Godrej Model No.Timeout of seater etc. complete as per specification and direction of Engineer in charge.
2
-
29060
Supplying and fixing of 04 seater Dinning table of size 117.5x117.5x75cm Godrej Model No.Timeout of seater etc. complete as per specification and direction of Engineer in charge.
4
-
15052
Supplying, fitting & fixing of Dining chairs of stainless steel sub-structure Godrej model No.UNWIND café chair etc. complete as per specification and direction of Engineer in charge.
20
-
3074
Providing & fixing of side hung Door of approved make to be fabricated from roll formed section etc. complete as per specification and direction of Engineer in charge.
1.89
-
4147.63
Providing, fixing and Installation of Roller blinds of Livin make etc. complete as per specification and direction of Engineer in charge. Livin make
323
-
5800
White Board
22.68
-
880
Providing fixing of mineral Fibre false ceiling tiles at all heights with 16mm thick beveled mineral fibre false ceiling tile etc. complete as per specification and direction of Engineer in charge.
30.6
-
1595
Providing & fiixing of Receiption table having all wood desk of Godrej etc. complete as per specification and direction of Engineer in charge.
5
-
37827
Supplying, fixing of seating chairs of width 62cm depth 60cm height 85cm of Godrej make etc. complete as per specification and direction of Engineer in charge.
6
-
6938
Supplying and fixing of locker of width 91.6cm depth, 48.6 cm height 198.1 cm of Godrej make etc. complete as per specification and direction of Engineer in charge.
1
-
18707
Supplying fitting and fixing of 360 degree rotafeableCCTV Camera having Day, Night function etc. complete as per specification and direction of Engineer in charge.
1
-
140000
Supplying and placing 03 seater Sofa with pine wood Frame etc. complete as per specification and direction of Engineer in charge.
2
-
29820
Supplying and placing 01 seater Sofa with pine wood Frame etc. complete as per specification and direction of Engineer in charge. 12 Nos.
4
-
18690
Supplying and pllacing ACURA COFEE TABLE with cost of all materials and labour etc. complete as per specification and direction of Engineer in charge.13 Nos.
2
-
9858
Supplying & fixing of seating chairs of width 62cm depth 60cm height and 85cm Godrej make etc. complete as per specification and direction of Engineer in charge. 14 Nos.
5
-
5406
6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge GF
2.97
-
150.5
1st floor
6.54
-
154.2
Finishing of sand stone 30mm thick dados, skirting and risers of step on 12mm thick C.P. (1:3) with cost of all materials and labour etc. complete as per specification & direction of Engineer-in-charge
28.65
-
1338.3
1st floor
25.2
-
1352.8
Providing and fixing of (GFRC) coping / column shaped vertical of top thickness with cost of all materials and labour etc. complete as per direction and specification of Engineer in charge
85.96
-
3200
Providing and fixing of (GFRC) Jally of minimum thickness of 25mm thick with cost of all materials and labour etc. complete as per direction and specification of Engineer in charge
298
-
7000
Providing and fixing of false ceiling at all height with 15mm thick integral denafied calcium silicate reinforced with fibre with cost of all materials and labour etc. complete as per specification and direction of Engineer in charge.
311.56
-
2156
Providing and fixing in position wall panelling at all height with integral denafied calcium silicate panels / tiles with cost of all materials and labour Providing and fixing of (GFRC) Jally of minimum thickness of 25mm thick with cost of all materials and labour
1147.12
-
2156
Supplying and fixing of Laptop table of width 90 cm depth 60cm of Godrej make with cost of all materials and labour etc. complete as per specification and direction of Engineer in charge.
44
-
17424
Supplying, fitting and fixing of Laptop table of width 135cm with cost of all materials and labour etc.complete as per direction and specification of Engineer in charge
22
-
19620
Laptop table of width 270 cm.
76
-
38332
Supplying and fixing of Executive Table floating top with founded edges including cost of all materials and labour etc.complete as per direction and specification of Engineer in charge
6
-
17010
Supplying of seating chairs of width 52 cm. with cost of all materials and labour etc.complete as per direction and specification of Engineer in charge
480
-
3212
Seating chairs of width 62 cm.
6
-
6938
Supplying fixing of Locker of width 91.6 cm depth 48.6 cm height 198.1 cm. with cost of all materials and labour etc. complete as per specification and direction of Engineer in charge.
6
-
18707
Finishing of cable stone tile in floors treads or steps and landing on 20mm thick C.P. (1:4) with cost of all materials and labour etc. complete as per specification & direction of Engineer-in-charge
737
-
1283.4
Single under reamed pile foundation with RCC M-25 using 12mm size crusher broken chips with cost of all materials and cost of labour etc. complete as per specification and direction of Engineer in charge. 300mm dia 6m. long
50
-
4792.8
(1) EXCAVATION OF PITS (2) FILLING PITS WITH FERTILE SOIL/ SILT INCLUDING CARRIAGE UP TO EACH PIT By tractor/ truck up to site and by head load up to pit (3) APPLICATION OF ORGANIC MANURE (4) APPLICATION OF CHEMICAL FERTILISERS NPK (5) COST OF PLANTING INCLUDING MIXING OF MANURE, FERTILIZER, PESTICIDES AND INITIAL WATERING (6) SUPPORTING PLANTS WITH STAKES INCLUDING COST OF STAKES (7) CONTINGENT EXPENDITURE INCLUDING COST OF ROPES, IMPLEMENT,BASKETS,DRUMS ETC (8) COST OF PLANTING TREES INCLUDING TRANSPORTATION UPTO SITE (9) COST OF PLANTING SHRUBS INCLUDING TRANSPORTATION UPTO SITE (10) DEVELOPMENT LAWN BETWEEN CAFETERIA & ALUMNI HALL etc. complete as per direction and specification of Engineer-in-charge. All other details and BoQ attached in the DTCN.
1
-
1446470
E.I. INTERNAL POINT WIRING-Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Modular Make- crabtree model Athena or its equivalent to LEGRAND/L&T)
242
-
1022
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. Average Length: 3 mtr
205
-
369
Recessed wiring to ceiling fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked and stepped modular Regulator ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
42
-
1455
Recessed wiring to Twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )Group C
2
-
912
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer in Charge.
51
-
477
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge.
434
-
715
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.
30
-
827
Recessed wiring for 6 pin 16 amp socket outlet with 5Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.
111
-
614
Recessed wiring for Projector socket outlet with 16A plug socket and 16A control switch at nearest separate location .
6
-
693
Recessed wiring for A.C socket outlet with 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20A SP MCB including all accesories and connection as per direction of Engineer in Charge.
13
-
551
SUBMAIN AND CIRCUIT WIRING-Recessed wiring to submain in 4 x 25 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 16 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For AC DB)
435
-
917
Recessed wiring to submain in 4 x 16 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x10 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For MAIN DB)
500
-
722
Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For P DB)
355
-
455
Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For L DB &CDB)
165
-
313
Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
210
-
205
Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
2400
-
169
Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
1915
-
145
Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.
700
-
131
DISTRIBUTION BOARD-Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) 6 way (4 + 18 ), TPN , MCB DB double door horizontal type(LDB)
1
-
4359
4 way (4 + 12 ), TPN , MCB DB double door horizontal type
12
-
2176
Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) 8 way SPN , MCB DB double door horizontal type
6
-
1636
4 way SPN , MCB DB double door horizontal type
6
-
1199
Supply, fixing, erecting, connecting and commissioning of indoor type dust and Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way VTPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as required ( But with out MCB/ RCCB/ Isolator).
8
-
9394
Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. 6 amp to 32 amp rating SP MCB , "c" series, 10KA breaking capacity
240
-
131
25/32 amp TP MCB
19
-
547
40 amp TP MCB
17
-
1374
63 amp TP MCB
12
-
1374
Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.25 to 40 amp rating DP RCBO, 100/300 mA
6
-
2874
25 amp rating FP RCBO, 100/300 mA
4
-
3627
40 amp rating FP RCBO, 100/300 mA
9
-
3645
63 amp rating FP RCBO, 100/300 mA
5
-
4075
Supply and fixing of following rating 240 V Module Cases Circuit Breaker (MCCB) having 36kA in the existing VTPN MCB DB ISI marked complete with connection testing and commissioning etc as required.100A FP MCCB, 36kA
7
-
6140
63A FP MCCB, 36kA
1
-
6140
EARTHING - Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required
16
-
2169
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
200
-
76
Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.
260
-
125
LIGHTINING PROTECTION-Fixing of lightning G.I finial made up of 25 mm dia 300 mm long , G.I. tube having single prong at top with 85 mm dia 6 mm thick G.I. base plate ISI marked including holes etc. complete as required.
4
-
372
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
120
-
57
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
95
-
93
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required.
4
-
62
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
180
-
76
Earthing with G.I earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
4
-
3426
CABLE TRAYS-Supply, Installation, laying and connection of G.I. Perforated & Ladder Type cable tray with bends, tees and clamps for fixing of cable with suitable MS structure and anchor fastner for supporting and necessary hardware with necessary welding has to be done to complete the job from ISA / ISMC / PLATE. The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved. The structural steel supports for the trays are to be provided at every 1 Mtrs. as per technical specifications.
-
-
-
600 mm width X 50 mm depth X 2.0 mm thickness
50
-
599
450 mm width X 50 mm depth X 2.0 mm thickness
50
-
554
300 mm width X 50 mm depth X 1.6 mm thickness
50
-
508
150 mm width X 50 mm depth X 1.6 mm thickness
50
-
432
FIXTURE-Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.
-
-
-
Ceiling indoor type recessed mounted pendant 1ft x 4ft panel LED Similar to JAQUAR Cat No. LSVRO3S042XW or equivalent.
186
-
4678
Ceiling surface indoor type Round LED Luminaire with 12 watt LED Lamp Similar to JAQUAR Cat No. LNRO02R012SC or equivalent.
14
-
1110
Indoor type surface mounted MIRROR LED Luminaire with LED Lamp Similar to JAQUAR Cat No. LTBLT5X009XC or equivalent.
6
-
664
Energy efficient 9W LED Light on existing angle holder or equivalent.
10
-
276
Ceiling mounted indoor type TUBE LED Luminaire with LED Lamp Similar to JAQUAR Cat No.LGLZPCX020XC or equivalent.
23
-
557
Ceiling mounted indoor type 2x T LED Luminaire with LED Lamp Similar to JAQUAR Cat No.LUNIO1X220XC or equivalent.
19
-
1610
Ceiling recessed indoor type Round PANEL LED Luminaire with LED Lamp Similar to JAQUAR Cat No. LNEP01R015XW or equivalent.
58
-
1027
Wall mounted recessed foot light with 6 watt LED Similar to JAQUAR Cat No.410M.NGG with metal box complete as required or equivalent.
4
-
4512
Ceiling mounted Bulk head Luminaire with LED Lamp Similar to JAQUAR Cat No.LBLK01X010XC or equivalent.
2
-
1485
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
39
-
2603
Supply, Installation, Testing and Commissioning of ceiling fan 900mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
3
-
2094
Supply, Installation, testing and commissioning of high speed wall fan of 400 mm sweep on partition wall/ brick wall , making good the damage complete, connection, etc as required.CG WMSDX 120
101
-
3211
Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
10
-
2844
TV AND TELEPHONE- Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in 20 mm dia non-metalic PVC conduit with clip in type modular television socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
3
-
593
Recessed wiring to telephone point with clip in type modular telephone socket (RJ 11) ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
4
-
397
Recessed wiring to LAN point with clip in type modular lan socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
15
-
548
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
5
-
143
Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
410
-
103
Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
90
-
41
Supplying and drawing UTP 4 pair LAN cat-6 cable in the existing surface / recessed PVC conduit as required.
310
-
64.67
VRF OUTDOOR UNITS :Modular type imported low noise outdoor condensing units, Cooling Only type, comprising of low pressure shell type inverter driven highly efficient Scroll Compressor, blue fin treated condenser coil for corrosion resistant, BLDC fan motor, high ESP and low noise aerodynamic condenser fan, efficient COP, protection devices for inverter circuit (compressor / fan) and fan motor, capable to operate at a temperature range of 15 to 52°C (Cooling mode) ambient conditions and power source of 3 Phase, 380-400-415V, 50Hz with other accessories as required for smooth operation of the system 30 HP Cooling Only Inverter Scroll Compressor
6
-
828160
VRF INDOOR UNITS-Indoor units complete with cooling coil, electronic expansion valve, electrical control box,inspection inlet for easy access to the unit, capable to operate at power source 1 Phase, 220-230-240V, 50Hz and other accessories as required for smooth operation of the system of the following capacities 2.0 TR Cassette Type Unit
36
-
44160
3.0 TR Cassette Type Unit
36
-
48000
ACCESSPROES-Imported Refrigeration Joints
66
-
4130
Wired Remote Controller for Ducted Indoors Units
72
-
3540
Supply, Installation, Testing & Commissioning of the above VRF system including Refrigerant Copper Piping between Outdoor to Indoor, Ducting for Indoor Units, Drain piping & including improted return air filter.
180
-
14000
SAFETY EQUIPMENTS-Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .
16
-
7500
AUDIO VISUAL EQUIPMENTS-Long Through Projector 5000 Lumens, WUXGA/16W/USB/OWF with Ceiling mount kit.
6
-
122070.31
Fixed Projector Screen, 130 inch
4
-
26483.05
Fixed Projector Screen, 110 inch
2
-
26483.05
Digital Podium
6
-
233050.85
Document Camera
6
-
41313.56
wireless digital Handheld Microphone with 18 or more channel
30
-
66298.31
100W Cabinet loudspeaker that shall be suitable for mounting on wall or ceiling
32
-
32810.17
80W Cabinet loudspeaker that shall be suitable for mounting on wall or ceiling
8
-
27237.28
Dual Channel Digital Power amplifier
4
-
106416.94
Convection cooled and class-D mixing amplifier
2
-
54985.59
Multifunctional stereo pre-amplifier with power supply 115 - 230 VAC
4
-
44450
Remote panel with max. cable length 300 m
4
-
4150
Audio Cable,HDMI cable, Connectors, 12U rack
6
-
52966.1
Installation, Commissioning and Testing
6
-
164194.91
P.H. Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge25mm dia PVC ASTM pipe (sch-80) In ground floor
45
-
189.8
32mm dia PVC ASTM pipe (sch-80) G/F
80
-
189.8
32mm dia PVC ASTM pipe (sch-80) G/F
70
-
197
32mm dia PVC ASTM pipe (sch-80) First floor
60
-
197
40mm dia PVC ASTM pipe (sch-80) G/F
20
-
249
40mm dia PVC ASTM pipe (sch-80) second floor
25
-
267.1
50mm dia PVC ASTM pipe (sch-80) in 2nd floor over roof of first floor .
55
-
330.6
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. 20mm dia CPVC pipe In ground floor
50
-
221.8
20mm dia CPVC pipe In first floor
38
-
229.3
25mm dia CPVC pipe In ground floor
70
-
299.7
32mm dia CPVC Pipe In ground floor
10
-
189.8
32mm dia CPVC Pipe In ground floor
20
-
433.6
32mm dia CPVC Pipe In first floor
10
-
442.2
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall
22
-
44.2
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. In ground floor
19
-
148.6
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor
178
-
169
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge15mm dia CP bib cock Jaquar con.037KN make
11
-
836.7
15mm dia CP two way bib cock (JaquarCon.041KN make)
20
-
984.3
15mm dia CP Health Faucet (ALD 573 )
20
-
1328.8
15 mm dia CP long body Bib cock (Jaquar Con .107KN Make )
12
-
1132
15mm dia CP angle stop cock(Jaquar Con.053KN Make )
81
-
713.6
20mm dia C.P. concealed Stop Cock (Jaquar make )Con-CHR-069KN
14
-
1033.5
32mm dia CP Bottle trap(Jaquar make)-ALD -769L -300x190cm
50
-
1427.3
450 mm long Grab Bar(Jaquar make) AHS1507
12
-
1427.3
Grab bar (Jaquar ) WAC-SAP-BAI090CS
2
-
12550.1
25mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
9
-
924
32mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
3
-
1352.6
40mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
2
-
1719
50mm dia brass or gun metal fullway valve(Shakti Make) IS:778 class-I
3
-
2548.2
15mm dia CP flange
122
-
40.3
15mm dia CP extension piece
122
-
59.3
Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge. 15mm dia CP revolving shower (Plaza delux make)
8
-
603.6
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge10 litres capacity pvc low level cistern with 32mm dia CP long flush bend ( Slimline white)
27
-
1398.9
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing Flyash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. On the roof of ground floor. 2000litre capacity water storage tanks
2
-
32211.1
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing Flyash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge On the roof of first floor2000litre capacity water storage tanks
4
-
33921.6
Supplying all materials ,Labour T & P and providing fitting and fixing Submersible with squirrel cage induction type submersible type submersible electricmotor to run on 3 phase / 1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/ 89 with following specifications with suitable control pannel jointing with GI / PVC / HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to work site, payment of taxes etc all completeas per specification and direction of Engineer in charge.1 HP single phase 3 stage head range 20to35 metre discharge 145 to 110 LMP withoutlet dia of 25mm
1
-
13775.6
Dol Control pannel
1
-
3805.5
32mm dia Steel short piece
2
-
152.3
Well cap
1
-
152.3
50mm dia CI bracket
2
-
91.3
2.50 Sqmm flat cable
60
-
128.1
20mm dia rigid UPVC pipe
60
-
6.9
Steel rope with cover
35
-
26.7
labour charges for lowering including Transportation
1
-
2000
Supplying all materials Labour T & P and providing and fixing towall or ceillingand floor HDPE pipes and pipe fittings conforming to IS: 4984 / 2000 (10kgf /sqcm)of the following nominal bore with clamps and jointing by fusion welding method including testing, making good the wall, celling and floor all complete as per Specification and direction of the Engineer in charge. 32mm dia HDPE pipe
120
-
99.8
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. In ground floor. 110mm dia U-PVC SWR pipe (Ashirvad / Supreme Make)
265
-
313.4
110mm U-PVC door cross Tee
5
-
318.4
110mm U-PVC door Tee
28
-
137.2
110mm U-PVC door bend
15
-
131.7
110mm U-PVC plain bend
20
-
72.3
110mm U-PVC Plain tee
25
-
115.2
110mm dia U-PVC 'P' trap
56
-
225
110mm U-PVC Plain shoe bend
29
-
186.5
110mm U-PVC offset without ear
29
-
115.2
110mm dia U-PVC Cowl
25
-
38.4
125mm dia C.P. Gratings
89
-
81.3
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall
57
-
184.8
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
26
-
150.4
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge. 580mm size Orissa pan (Parryware/ Cera /Hindware )
7
-
2267.1
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge European water closet with ‘P’ trap plain (Parryware/ Cera /Hindware )
20
-
2601.9
Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Hindware make C-60002)
13
-
4803.5
15mm dia urinal spreader
13
-
286.6
32mm dia C.P. dome waste
13
-
128.5
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal of size 600mmx350mm (Parryware/ Hindware / Cera Make)
4
-
2777.4
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge600x450x250 mm stainless Steel kitchen sink-glossy-IS: 13983-1994 (jayna make )
1
-
4664
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge550mmx400mm size wash hand basin (Parryware/ Cera /Hindware)
10
-
4022.1
Counter top basin 560 x 455 Parryware make white
20
-
4157.6
Half Pedestal basin(Hindware,parryware make)
3
-
8809.7
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge.600mmx450mm size B.E mirror
13
-
645.5
Big Size Mirror
9
-
1750.3
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.600x125mm plate glass shelf with CP guard rails
13
-
584.3
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mmx600mm long CP towel rail
24
-
688.5
CP ring towel rail
28
-
455.7
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder
28
-
170.6
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
50.82
-
272.6
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
11.3
-
4372.3
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
5.65
-
6250.1
In First floor
4.38
-
6534.9
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
367.99
-
149.9
In First Floor
237.52
-
153
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor
112.62
-
928.5
In First floor
85.64
-
937.9
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge 45cm. x 30cm. Kajaria / Somany / Johnson to be pree approved. In ground floor
367.99
-
886.7
In First Floor
237.52
-
900.7
Supplying all materials, labour, T&P and providing brick work with K.B.bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge InGround floor (Super structure )
1.05
-
4654.5
In First floor
0.46
-
4939.8
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning and bitumen painting over top of wall including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn first floor
99.17
-
165.3
Supplying all materials labour T&P and filling in Sunken floors in toilets with sinter (light weight Slag)well watered and rammed including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of Engineer in charge In ist floor
8.74
-
555.75
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. Same as CP in First Floor
99.17
-
837.7
Supplying all materials, labour,T&P and providing cement concrete(1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
1.29
-
7062.4
In First floor
0.43
-
7347.2
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
13.9
-
416.4
In first floor
4.26
-
467.9
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.96
-
5313.6
In First floor
0.32
-
5336.1
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floor
23.69
-
2597.5
In First floor
9.94
-
2611.6
Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm of Darwaja Make or equivalent as per direction of E.I.C.
55.24
-
5440.3
Supplying all materials, labour, T&P and providing fitting fixing of Al. door (sliding type ) with OEL anodized Al. door section of 9202 as vertical member,9201 as top member and 9200 as bottom and middle member and 6mm plane glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, T&P hire charges of drilling machine, labour charges etc. complete.
5.04
-
5834.1
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. Aquagurd Pure Chill 120 PSS UV
2
-
95282
EXTERNAL P.H. WORK.Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia U-PVC Alround Concrete
40
-
1042.1
160mm dia U-PVC Alround Concrete
70
-
1692.8
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Flyash brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmx150 mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm
10
-
1375.1
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, Flyash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 760mmx760mmx460mm
9
-
7922.3
---- do --- addl depth of 0.15m upto 0.90m
7
-
1022.6
RCPC Manhole Cover (18" Round Cover )
11
-
1093.1
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, Flyash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mmx910mmx910mm
10
-
15414.9
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and K.B. brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit
3
-
18296.2
Construction of 50 users RCC septic tank )Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
41.76
-
193.2
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
25.06
-
207.4
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
4.18
-
4809.1
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
108.24
-
225.3
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
24.2
-
416.4
RCC beam,Column, girders and bressmer etc
136.32
-
707
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
42.1
-
5313.6
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
26.32
-
7062.4
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside)
92.96
-
163.1
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
79.36
-
32.1
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
12
-
193.5
Supplying all materials, labour, T&P and providing brick work with fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In foundation and plinth
1.7
-
4654.5
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2
-
180.8
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.110mm diameter U-PVC SWR pipe
3
-
313.4
110mm dia U-PVC Plain shoe bend
2
-
186.5
110mm dia U-PVC Cowl
2
-
38.4
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
11.38
-
107.3
Sinking of 150mmsize tube well through hand boring(water jet)method Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
-
11761.3
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
1
-
1320.6
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in chargeDrilling pilot bore from 0 to 360 metres 2 x 100m
80
-
943.6
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in chargeReaming 100mm to 150mm dia from 0 to 360 metres
80
-
162.8
Reaming 150mm to 200mm dia from 0 to 360 metres
80
-
193.2
Reaming 200mm to 250mm dia from 0 to 360 metres
80
-
214
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge.from 0 to 360 metres
1
-
1515.8
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge.150mm dia PVC casing pipe from 0 to 360 metres
80
-
117.5
Cost of 150mm dia PVC ASTM pipe (sch-80)
70
-
1075.5
Cost of 150mm dia PVC well screen Cutting
10
-
350
Cost of 150 mm dia C.I. cutter plug 2x 2
1
-
400
Cost of bentonite powder
20
-
269
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
1.5
-
1628.4
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
1.5
-
240.4
Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 125/100mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
1235.8
Cost of Cement
2
-
646
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
1
-
2036.6
Construction of Production well Protection Chamber Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
0.65
-
193.2
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge
0.4
-
272.6
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.2
-
4372.3
Supplying all materials, labour, T&P and providing brick work with K.B.bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In F&P
2.34
-
4654.5
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
9.36
-
149.9
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs
1.44
-
416.4
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.23
-
5313.6
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
0.23
-
7062.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements