Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,63,600Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_105957_4Bid Award Id
ViewTender No
CCENC (R AND B) /08/ 2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour, cess and T&P etc. required for the work complete.
17.86
7150
127715.07
Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.
70.81
5491
388866.57
R.C.C. work of Grade-M20 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position.
-
-
-
Column footing
42.66
6035
257462.06
Column in Super Structure
-
-
-
Ground Floor
24.48
15154
370973.1
First Floor
8.08
17171
138743.62
Second Floor
8.08
19585
158253.34
Third Floor
2.04
22476
45851.96
Chajja
-
-
-
Ground Floor
13.65
1197
16340.69
First Floor
22.96
1370
31470.12
Second Floor
10.06
1578
15879.71
Third Floor
0.84
1827
1535.07
Lintel
-
-
-
Ground Floor
5.41
13638
73782.28
First Floor
3
15351
46055.94
Second Floor
2.98
17402
51859.78
Plinth beam
16.33
6900
112688.27
Roof beam
-
-
-
Ground Floor
8.06
15154
122142.29
First Floor
6.92
17171
118824.98
Second Floor
6.92
19585
135533.81
Third Floor
1.58
22476
35512.79
Roof Slab
-
-
-
Ground Floor
27.44
13200
362210.47
First Floor
19.6
14826
290597.44
Second Floor
19.6
16771
328730.61
Third Floor
2.81
19099
53670.41
Staircase
-
-
-
Ground Floor
2.43
15031
36525.43
First Floor
2.43
17023
41367.11
Second Floor
2.43
19408
47162.63
Shelves
-
-
-
Ground Floor
17.33
1159
20088.76
First Floor
25.82
1345
34738.49
Second Floor
25.82
1568
40501.51
Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approved drawing and technical specification and as per clause-1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer-in-Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)
-
-
-
Ground Floor
165.11
8554
1412463.21
First Floor
53.38
8587
458391.14
Second Floor
52.66
8621
454012.93
Third Floor
8.92
8657
77225.52
Fly Ash brick masonry in cement mortar (1:6) in superstructure using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.
-
-
-
Ground Floor
78.7
5530
435213.36
First Floor
35.82
5899
211312.93
Second Floor
42.9
6323
271297.45
Third Floor
13.57
6812
92443.05
Fly Ash brick masonry in cement mortar (1:4) in superstructure using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.
-
-
-
Ground Floor
7.21
5739
41380.93
First Floor
3.25
6108
19853.11
Second Floor
1.79
6533
11694.61
16mm (5/8”) thick cement plaster (1:6) over brick masonry finished smooth to inside rough surface of 9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete.
-
-
-
Ground Floor
412.71
265
109471.33
First Floor
258.97
272
70460.56
Second Floor
132.77
279
37057.43
Third Floor
69.41
286
19876.25
Providing 12mm thick cement plaster (1:6) over brick masonry finished smooth to inside rough surface of 9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete.
-
-
-
Ground Floor
856.43
183
157129.21
First Floor
355.6
191
67948.05
Second Floor
388.54
199
77350.54
Third Floor
89.81
207
18631.98
6mm (¼”) thick cement plaster (1:4) finished smooth to ceiling after chipping and chiseling including watering and curing with cost, conveyance, royalties, and taxes of all materials with all labour and T&P required for the work complete in all respect.
-
-
-
Ground Floor
345.19
206
71195.44
First Floor
230.39
211
48752.83
Second Floor
235.29
217
51086.16
Third Floor
18.02
222
4015.04
Supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm coloured / printed series of approved make of premium grade having thickness 8mm to 10mm conforming to IS-13756 on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects.
-
-
-
Ground Floor
100.68
1168
117678
First Floor
115.49
1182
136520.73
Second Floor
141.41
1195
169112.22
Supplying, fitting and fixing vitrified wall tiles having dimension 20cm x 30cm coloured / printed series of approved make of premium grade having thickness 8mm to 10mm conforming to IS-13756 as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects
-
-
-
Ground Floor
15.44
1299
20067.37
First Floor
21.55
1319
28435.23
Second Floor
14.24
1340
19085.87
Supplying, fitting & fixing of Vitrified Industrial floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 30cm x 30cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
55.42
1043
57818.02
Supplying, fiting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture etc. complete
21.36
10661
227733.48
Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with 5mm thick Black Glass paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
8.73
8682
75810.54
Manufacturing, supplying, fitting and fixing M.S. iron grill gate/ M.S. grills Window, M.S grills Door Shutter made out of M.S.flat of 20mmx6mm & frame made out of 35mmx 35mm x6mm size M.S. angle iron of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect.
3628.5
75
272572.92
Providing & fixing 20 mm thick granite stone(above 0.4 sqm) in steps, landing, dadoes over 25 mm thick cement mortar (1:4) including rounding edges with cost conveyance royalty taxes of all materials labour T & P required as per Engineer In Charge on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects.
-
-
-
Ground Floor
9.1
2809
25564.63
First Floor
9.1
2822
25684.75
Second Floor
9.1
2836
25810.33
Fixing Granite tiles in dados skiring and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing ceomplete excluding cost of precast tiles.
-
-
-
Ground Floor
5.67
2940
16670.2
First Floor
5.67
2959
16782.63
Second Floor
5.67
2980
16900.57
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved designwith cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
220.83
342
75674.02
Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of Red Oxide priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.
-
-
-
Ground Floor
29.52
264
7805.09
First Floor
22.57
271
6116.47
Second Floor
9.5
277
2639.1
Third Floor
14.04
284
4000
Wall painting two coats with 100% Acrylic Weather Seal coat paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer including finishing the surface smooth with cement putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.
-
-
-
Ground Floor
788.86
180
142152.57
First Floor
229.29
187
42900.16
Second Floor
249.34
194
48421.83
Third Floor
118.74
201
23961.73
Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, taxes, labour, T&P etc. complete.
-
-
-
Ground Floor
1058.69
89
94858.62
First Floor
844.95
91
77312.93
Second Floor
507.27
93
47379.02
Third Floor
177.24
95
16890.97
Painting two coats with plastic emulsion paint of approved shade, make and quality with brush to interior wall surface over a coat of primer after cleaning the surface including cost of paint, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect.
-
-
-
Ground Floor
691.59
187
129742.28
First Floor
615.66
191
118022.02
Second Floor
507.27
195
99374.19
Third Floor
58.5
200
11717.55
Factory made Solid WPC door frame of size 100mmx75mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
80.16
1114
89322.29
Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. Tem 12 page 234
3.9
8682
33877.63
Supplying fitting fixing of UPVC Sliding window of approved make with 6mm thick glass of approved quality complete with frame shutter and all fiting and fixtures
57.69
4960
286198.36
Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete. New Miscelanous item page No234 Item-10
12.54
1841
23086.14
Providing fitting fixing of 12.5mm thick Gypsum Board ceiling with Aluminium anodised T section No.3215 with 2'0" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0"x2'0" with12.5 mm thick Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
78.13
871
68082.48
First Floor
54.07
901
48765.73
Second Floor
136.1
907
123442.7
Providing, supplying, fitting & fixing of wall paneling mase out of aluminum anodised section framing fixed with 9mm thick BWR plywood with 4mm thick veneer pasting including cost of all charges etc all complete.
Page 234 Item-06
373.28
2285
853131.44
Filling foundation and plinth with excavated earth including cost of all and complete finished .
269.7
151
40824.49
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in and all labour T&P etc, complete as per direction of the Engineer-in-charge.
166.96
505
84414.98
Dismantling of brick masonary wall in cement mortar uncer 3.00m height including dressing & levelling the bed etc. complete.
78.75
1569
123627.48
Dismantling of old door window shutter including removal of frame with cost of all charges etc all complete.
64.26
444
28563.32
Dismantling of old GCI/AC sheet including removal of frame with cost of all charges etc all complete.
206.4
101
20944.5
Construction of granular sub-base by providing of grading-VI (close graded) material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the.
11.89
1832
21788.31
Supplying fitting fixing of 80mm thick cement concrete interlocking paver block of M-30 garde of approved make,design,colour and size made by block making machine with proper compaction laid in required pattern etc.complete in all respect confirming to IRC 63:2018
89.18
608
54257.11
Supplying, fitting and fixing colour coated durashine sheet roofing of 0.45mm (T.C.T.) x 1072 in roofing including fixing with nuts, bolts including cost, conveyance, taxes of all materials with all labour and T&P etc. complete in all respect.
83.61
728
60893.16
Providing, supplying, fitting & fixing of M.S. angle, square pipe framing including cost of all charges etc all complete.
5.13
14357
73652.49
Removing the debris away from the work site within 5KM intial lead & lifts including cost of all charges etc all complete.
78.75
276
21735.79
ELECTRICAL WORK
INTERNAL WIRING. Recessed/surface wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC HMS rigid conduit with 6Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size MS box with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of switch & Sockets: Ligrand myrus/ Schneider Unica pure/ Panasonic Vison or equivalent) (Make of wires: Finolex/KEI/RR Kable/Polycab or equivalent) Group A
68
563
38284
Group B
48
809
38832
Group C
35
1118
39130
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.Make-Schneider(Unica Pure)/legrand(MYRIOUS) /Panasonic (Vision)/Eq
17
193
3281
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Unica Pure)/ Legrand (MYRIOUS) /Panasonic (Vision)/Eq,(For equipement power)
15
651
9765
Supplying,fixing of 2x6A +1x16A Plug on the separate board with complete fitting by 02 no of 6A switch & socket,1 set 16A plug socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Make-Schneider(Unica Pure)/legrand( MYRIOUS) /Panasonic (Vision)/Eq,(For equipement power)
3
1546
4638
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
25
63
1575
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable (Finolex/Polycab/RR/KEI) or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty of mentioned size (AKG/Polycab/Kinjal/Norpack) or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge..
-
-
-
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
105
134
14070
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG) (2X2.5+1X1.5)
445
148
65860
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X2.5)
275
167
45925
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
115
197
22655
4 x 6 sq.mm + 2 x 2.5 sq.mm
25
316
7900
Supply & Laying of 1.5 mm2 for inverter wiring
301
49
14749
FIXTURE SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. Similar to Jaquar or Eq. model of Bajaj/philips/Wipro/Panasonic
48
660
31680
S/F of 48" ceiling fan (usha striker equivalent of bajaj/orient as per direction Engineer-In-charge).
20
2199
43980
Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required. Make- Havells/Usha/Crompton/Eq.
10
2324
23240
S/F of Round type surface/recess 18W (1800Lm) LED ceiling light fitting Make-Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge
43
2110
90730
S/F. of 60Wt. LED Street light fittings complete with G.I. bracket. Of Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge
4
6870
27480
Supplying of . 1.5 Ton split type copper condensor A.C machine 3 star rated (Voltas/Carrier/Hitachi)
10
47300
473000
S/F of 4KVA stabilizer(V-guard,m-take)
10
9582
95820
S/F of 3pin 15A top for AC machine (Havells/ Anchor/ ligrand)
10
115
1150
Supply of Steel Braket for fixing of olutdoor unit on wall
10
1550
15500
S/F of 1500VA or above inverter with 2nos 150Ah tubelar batteries with trolly etc. complete set. (for each suit) as per direction of engineer-in-charge.
2
46500
93000
S/F of Call bell with bell push (Anchor/Cona/Benlo)
1
205
205
DB: S/F of 6way Double Door DB with(63A DP mcb-1no, 6-32A sp mcb -4nos) (make for MCB & DB Schneider/Ligrand/L&T) as per direction of engineer-in-charge.
6
3800
22800
S/F of 8way double door TPN DB with 63A TPN mcb-1no, 32A dp mcb -2nos ) (make-Schneider/Ligrand/L&T)
1
5491
5491
Supplying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade POLYCAB/ HAVELLS/ KEI/eq. of following size cables as per direction of Engg.-in-Charge. 3.5core x 35 sq mm (from external to main panel)
100
330
33000
S/L of 3C x 2.5 sq.mm unarmoured cu.cable with 20mm dia PVC MMS conduit on surface for street light connection.
80
143
11440
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
80
134
10720
END TERMINATION
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3.5C x 35 sq.mm
2
341
682
Earthing.
Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
2
2549
5098
Providing and fixing 4mm CU wire on surface or in recess for loop earthing as required.
10
66
660
S/F of main panel board (36" x 18" x 12) with 16 swg CRCA sheet one coat redoxide & 2coat of gray enameled paint dust proof with following arrangement I/C - 200A 36ka 4p MCCB-1set,250A Busbar cu-1no. O/G 100 A on load change over switch -1no,200A cu.busbar-1,100A TPN mcb-1no,63A DP mcb-4nos,32A dp mcb-2nos with Indicator with toggle switch as per direction of engineer-in-charge. (Make of MCCBs-Legrand/Hager/L&T)
1
99840
99840
S/F. of Fire Extinguisher ABC type of 6Kg.
Supply, Installation, Testing and commissioning ABC (Powder type) 6 Kg. Capacity Fire Extinguisher, Mild Steel Cylindres ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS: 1349-1993 as required as per specifications. (Fireshield/ Eversafe/ Safex/ Safeguard) as per Engineer-In-Charge.
3
3200
9600
Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .
3
7500
22500
SITC of High Pulse Voltage OPR 60/ESE-60 Early Streamer Emission (ESE) with radius of protection of 79 mtrs in level-1 accordance to NFC-17-102 standards. The Air termination shall be of the type that response dynamically to the appearance of a lighting conducrtor should deliver a unique gain time in efficiemncy anticipating the natural formation of an upward leader that propagates rapidily to capture the lighting stroke andconduct it towords the ground
Make -ABB/STOR4MKING -2CT8899800R7100/paratonex/Ally well/ISG Global /Liva/Orbital)
1
160800
160800
Supply and Fixing of Air Teerminal; support mast of 5mtrs height for mounting of OPR 60/ESE30 with guy wire and base plate
Make -ABB/STORMKING-2CDT8899800R7100/Paratonex
1
18000
18000
Supply and installation Lighting striker Recorder (L.S.R) of Australian Make LSR it should be non electronics non resettable type having 6 digits display and enclosed in an IP67 enclkoser with minimum sensitivity of 1000A and maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1:1989. it should be non electronics type and does not require external power supply for working model LSR.
Make -ABB/STORMKING-2CDT8899800R7100/Paratonex
1
92530
92530
S/F chemical Earthing with 2.4mtrs copper bonded rod and 50KG Chemical compound including supply and installation of Earthing chamber work and Hingcover as per 4 I.E Rules (CPRI certified for S.C
current ).
2
16474
32948
S/F of clamp for fixing of copper bonded rod in earthing
1
900
900
Suply of down conductor 70 sqmm single core insulated flexible copper
cable with necessary accessories etc. (Make-Finolex/ KEI/ Polycab)
35
770
26950
PVC pipe 25 mm dia and other all acessories
27
250
6750
P.H WORK
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
20mm dia C - PVC pipe
-
-
-
Ground Floor
40
302
12100
First Floor
10
313
3131.7
Second Floor
20
325
6500
25mm dia C - PVC pipe
-
-
-
Ground Floor
40
404
16160
First Floor
20
415
8304
Second Floor
30
426
12795
32mm dia C - PVC pipe
80
353
28296
40mm dia C - PVC pipe
60
463
27816
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
22
861
18948.6
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
7
1255
8785
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
4
1451
5807.6
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
4
1132
4528
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
11
1156
12722.6
25mm dia brass full way valve (Shakti make)
4
1211
4847.6
32mm dia brass full way valve (Shakti make)
4
1774
7096.8
40mm dia brass full way valve (Shakti make)
4
2552
10209.6
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
7
1648
11540.9
15mm CP Extension piece
48
52
2524.8
125mm CP grating
22
87
1916.2
15mm size C.P. flange
48
77
3715.2
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
2000 liters capacity PVC water storage tank roof of 2nd floor
2
48661
97323.8
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
10
62
620
First Floor
5
63
316
Second Floor
8
64
515.2
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
Ground Floor
5
211
1059.5
First Floor
3
212
638.7
Second Floor
4
214
856.4
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
40
214
8572
First Floor
15
221
3318
Second Floor
25
229
5725
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Supreme /Ashirvad)
80
514
41160
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
10
497
4973
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
10
293
2936
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
10
232
2320
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
8
407
3259.2
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
58
116.4
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
6
457
2742.6
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
12
322
3872.4
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
6
551
3307.2
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
12
386
4632
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
20
160
3202
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2
2365
4731.4
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
3
3729
11189.1
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
3
5894
17683.5
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
2
3228
6457
One piece commod(Hindware)ELEMENT Cat No.92084.
5
19991
99958
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with 22” x 16” pedestal
7
6173
43215.9
Halfpedestal basin(560x450)Hindware No.91049+91115
3
7717
23151.3
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
5902
5902.4
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
25mmx600mm long CP towel rail
1
901
901
Towel ring
11
648
7129.1
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
600mmx125mm plate glass shelf with CP/NP guard rails.
7
694
4862.2
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
10
803
8034
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP soap holder
12
279
3355.2
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
½” x 5” CP Shower (Plaza Deluxe Make)
1
530
530.3
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
20
235
4716
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
147
1475
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
2
10548
21096.4
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
2
1737
3474
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2.33
5660
13189.66
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
Ground Floor
2.33
7286
16978.48
First Floor
0.29
7712
2213.57
Second Floor
1.35
8202
11081.44
Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( Vitrified floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria/Somany/Johnson tile 60cmx60cm
-
-
-
Ground Floor
23.3
1255
29249.83
First Floor
2.87
1268
3645.39
Second Floor
13.51
1282
17322.03
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
85.6
198
16974.48
First Floor
14.28
202
2895.98
Second Floor
53.21
207
11046.4
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( Vitrified mat finish wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria/Somany/Johnson tile 60cmx30cm
-
-
-
Ground Floor
85.6
1215
104050.5
First Floor
14.28
1235
17642.94
Second Floor
53.21
1256
66852.75
Granite tiles 10mm thick - Kitchen
1.02
1836
1873.64
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
14.36
3430
49277.14
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
44.64
1114
49742.35
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
Aqua guard pure Chill 80 PSS UV
2
112242
224484
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
100mm dia P.V.C. pipe
20
1287
25748
150mm dia P.V.C. pipe
20
2090
41808
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
2
20534
41069.2
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
24470
24470.2
1 no 50 users RCC septic tank
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
27.95
291
8154.41
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
5.59
313
1750.68
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
32.8
271
8911.76
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
3.08
807
2488.33
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3.08
5660
17435.26
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.68
207
6583.1
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.68
40
1273.54
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
10.34
753
7792.22
R.C.C beams,columns,girder and bressmer etc.
73.5
1186
87185.7
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
9.39
9102
85469.66
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
11.76
7963
93649.58
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.8
7286
5829.52
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
5.28
198
1047.02
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.6
5737
3442.32
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
6
280
1683
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
5.69
162
922.24
Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
00 mtr to 30mtr
30
755
22664.4
30 mtr to 45mtr
15
836
12544.2
Drilling of 150mm dia bore
-
-
-
45 mtr to 215.00mtr
170
554
94263.3
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia P.V.C casing pipes
-
-
-
00 mtr to 30 mtrs
30
138
4146
30 mtr to 60mtr
15
138
2073
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
200mm dia PVC (sch-80) pipe
45
1633
73521
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
789
789.8
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH Rig
1
4994
4994.8
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
Rocky terrain with boulder formation for 300m depth
2
1122
2244.22
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
16737
16737.2
DOL Control panel
1
3805
3805.5
40mm dia steel short piece
1
152
152.3
Well cap
1
152
152.3
50mm size CI bracket
1
91
91.3
2.50sqmm flat cable
120
128
15420
20mm dia rigid UPVC pipes
30
6
207
Steel rope with cover
30
26
801
Labour charges for lowering including transportation
1
2000
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
32mm HDPE pipes (Finolex/Supreme make)
90
99
8982
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements