Works Department Tender

Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite aggregates / chips / metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Cement concrete work (1:2:4) using 12mm (½”) size black hard crusher broken granite chips of approved quality and from approved quarry over top of wall including hoisting, lowering, laying and compacting, watering & curing, as directed including basic cost, conveyance, royalities of all materials and cost of all labour and T&P. required for the work etc. including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge (mixture machine to be used at site).

RCC M20 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills Foundation

Plinth Beam

Column & Beam

Roof Slab

Lintel

Chajja average 65mm thickness

Cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL (grade Fe 5OOD} / JINDAL STEEL / SHYAM STEEL etc. including bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work including labour cess but excluding GST bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires)

25mm thick grading Concrete (1:2:2) over roof slab using 12mm & down graded size black hard crusher broken granite chips of approved quality and from approved quarry, including finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Fly ash brick masonry in cement mortar (1:6) using (25x12 x8cm) size bricks after immersing the bricks for six hours in water before use in Foundation and Plinth including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)

Fly ash brick masonry in cement mortar (1:6) using (25x12x8cm) size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)

Fly ash brick masonry in cement mortar (1:4) using (25x12x8cm) size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)

Supplying, fitting and fixing window M.S. grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including basic cost of grills, conveyance, of all materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Supplying, fitting and fixing up window (sliding type) made of aluminium, section 9778 all window frame section No. 4095, 4096 & 9777, 3994 all shutter frame as panel ftted with rubber beading including lucking arrangement including all fitting, basic cost of materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge

5mm thick black glass

Providing and fixing 32 mm thick Flush Door shutters conforming to IS:2002 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face vencers on both face of shutters inclusive of 4 Nos of Stainless steel Butt Hinges (100 mm x 60 mm x 2.5 mm) 40 mm stainless steel screws. Cylindrical Lock(Godrej-9843), Tower Bolt SS 10 x 300 mm (Bathroom)(Godrej 3264), PVC Door Buffer with SS Screw, teak wood lipping around the edges & paste with 1.5 mm thick laminate on both side of the flush door, etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc including labour cess but excluding GST complete as per the direction of Engineer-in-charge.

Providing and fixing of 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings including labour cess but excluding GST complete

Providing fitting and fixing in proper position factory made wooden polymer composite (WPC) door frame having waterproof, termite & borer Proof, no rotting, swell & crack proof, bend & warp resistant properties of size 62 mm x 100 mm (dimension torelance 5 mm, subjected to approval of the EIC, no extra payment will be made for diiference in sizes) conforming to relevant IS specifications, of approved design and drawing fitted to the masonary/ concrete wall with anchor bolts of required size including cost of all materials, labour, conveyance, taxes, T&P etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge. Make:- Ecoste/ Century Ply / equivalent

Providing and fixing Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS-53 of 0.6 mm thick "D" quality, galvanised as per IS-277 with zinc of 120 Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black/Pearl white/Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52mm and with all vertical and horizontal mullions are of 46x70mm and fixed beadings are of 18x25mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle being made of high grade aluminium powder ccoated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered clips should be dglass filled nylon. The sections are to be cut to length, metre joined with corner bracet and frames are fixed to the concrete / masonary walls by means of self expanding screws and plain glass to be using 5mm plain glass including cost of all materials, labours, cess but excluding GST complete as per direction of Engineer-in-charge

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with basic cost, conveyance of all materials, labour, T&P. etc. including labour cess but excluding GST required for the complete in all respect as directed by the Engineer-in-charge in all floors

12mm (½") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

16mm (5/8") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

6mm thick cement plaster (1:4) over ceilling finished smooth after chipping, chiselling & cleaning including watering, curing etc. with basic cost, conveyance, royality of all materials, labour, T&P required for the work etc. including labour cess but excluding GST complete

Finishing wall surfaces of wall with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Finishing wall surfaces of wall with acrylic wall primer (water bound) two coats over inside surface of wall including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Finishing wall surfaces of wall with weather coat (Peach bloom) two coats to outer surface of walls including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)

Finishing wall with plastic emulsion paint of approved shade two coats to surface of walls including basic cost of paint, conveyance of all materials, labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge

Painting two coats with paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge

Supplying, fitting and fixing of Industrial vitrified tile in floor on 20mm thick bed of Cement mortar (1:4) jointed with neat cement slurry mixed wiht pigment using white cement in grating to match the shade of marbles incluidng rubbing & polishing etc. with basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Supplying, fitting and fixing of Vitrified tile in floor of size 600x600mm plain / ivory of approved make conforming to IS 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including basic cost of all materials, labour, T&P etc. required for the work all complete as per direction of Engineer-in-charge

Supplying, fitting and fixing of vitrified tile of size 600x600mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Supplying, fitting and fixing of Granite tile of size 0.40 to 1.00 sqm (20mm thickness) flooring on floor trades or steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment using white cement in grating to match the shade of granite including rubbing & polishing etc with basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Supplying, fitting and fixing of ceramic glazed tile of size 200x300 mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Disposal of unserviciable debries from work site by mechanical means excluding loading & unloading within 5 km lead including all labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the engineer-in-charge

Plantation of Lawn Grass including cost of grass, conveyance, labour, T&P required for the work including labour cess but excluding GST complete as per the direction of the Engineer-incharge

Supplying & stacking sludge at site including royalty and carriage upto 5km as per the direction of the Engineer-incharge including labour cess but excluding GST complete

Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984 as per the direction of the Engineer-incharge including labour cess but excluding GST complete