Rural Development Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 4,30,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Constn. Of Multipurpose Hall 300 Capacity At Santara Constn. Of Multipurpose Hall 500 Capacity At Jodabara. (ulb-vyasanagar) For The Year 2023-24 In The Dist. Of Jajpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CERWI_90871_1Bid Award Id
ViewTender No
Tender Online RCK-20/23Tender Authority
Rural Development Department ViewPurchaser Address
-Website
http://http://rdodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation in hard soil by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
58.03
12000
206.8
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
17.41
2000
114.9
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).
181.79
136685
751.9
... More
Carriage of excavated earth by mechanical means within 5 KM lead
40.62
11325
278.8
... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.
68.53
372584
5436.8
... More
Providing and laying in position ready mixed M-30 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
-
-
-
... More
Ground floor
-
-
-
... More
Pile caps
27.7
210514
7599.8
... More
RCC in Plinth beam
32.54
247259
7599.8
... More
RCC in column
22.48
326478
14520.8
... More
RCC in Roof beam
28.17
409053
14520.8
... More
Roof slab
46.79
615317
13149.7
... More
RCC in S.case
17.97
260153
14474.7
... More
RCC in Lintel
1.5
20700
13804.7
... More
Chhaja
16.25
17705
1089.9
... More
First floor
-
-
-
... More
RCC in column
15.31
248446
16230.4
... More
RCC in Roof beam
24.23
393305
16230.4
... More
Roof slab
39.27
572733
14585.2
... More
RCC in S.case
12.25
198182
16175.2
... More
RCC in Lintel
1.33
20443
15371.2
... More
Chhaja
14.36
17667
1230.3
... More
Terrace Floor
-
-
-
... More
RCC in column
5.46
99795
18277.5
... More
RCC in Roof beam
7.21
131780
18277.5
... More
Roof slab
11.78
192051
16303.2
... More
RCC in Lintel
0.08
1379
17246.4
... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding, tying the grills as required for R.C.C. works, providing Fan Hooks where necessary and hoising, lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550
-
-
-
... More
Ground floor
292.67
2595807
8869.4
... More
First floor
110.49
982819
8895.1
... More
Second floor
30.23
269712
8922
... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Brick work in foundation
33.33
165603
4968.6
... More
Ground floor
87.74
439314
5007
... More
First floor
92.96
492195
5294.7
... More
Terrace Floor
37.14
208931
5625.5
... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)
-
-
-
... More
Ground floor
756.13
117275
155.1
... More
First floor
810.23
130447
161
... More
Terrace floor
197.3
33008
167.3
... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)
-
-
-
... More
Ground floor
378.98
83565
220.5
... More
First floor
494.95
111759
225.8
... More
Terrace floor
76.53
17701
231.3
... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns, Landings, Railings, Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
... More
Ground floor
476.11
81271
170.7
... More
First floor
353.8
61879
174.9
... More
Terrace floor
63.96
11461
179.2
... More
Priming one coat with water bound wall cement primer. (Outside)
-
-
-
... More
Ground floor
756.13
51341
67.9
... More
First floor
810.23
57202
70.6
... More
Terrace floor
197.3
14461
73.3
... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
Ground floor
855.09
64986
76
... More
First floor
848.75
64504
76
... More
Terrace floor
140.49
10677
76
... More
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
Ground floor
689.33
110844
160.8
... More
First floor
682.99
112079
164.1
... More
Terrace floor
140.49
23532
167.5
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Ground floor
756.13
115234
152.4
... More
First floor
810.23
127935
157.9
... More
Terrace floor
197.3
32277
163.6
... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
Ground floor
186.66
212419
1138
... More
First floor
176.16
202319
1148.5
... More
Providing vitrified tile flooring using matte Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality, colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost, conveyance, loading, unloading, royalties and taxes of all materials,cost of all labour, sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/ Kajaria/ Rak/ Ceramic or equivalent
-
-
-
... More
Ground floor
13.55
16848
1243.5
... More
First floor
13.55
17064
1259.4
... More
Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Make Johnson/ Kajaria/ Rak/ Ceramic or equivalent
-
-
-
... More
Ground floor
29.16
28842
989.1
... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor
-
-
-
... More
Ground floor
121.19
39981
329.9
... More
First floor
293.82
105833
360.2
... More
Terrace floor
72.08
28470
395
... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
5439.18
468748
86.18
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
Ground floor
123.39
24937
202.1
... More
First floor
88.36
18325
207.4
... More
Terrace floor
18.9
4023
212.9
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
-
-
-
... More
Ground Floor
365.48
98350
269.1
... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
62.42
185730
2975.5
... More
First Floor
62.42
187078
2997.1
... More
Terrace Floor
26.24
79236
3019.7
... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.
-
-
-
... More
Ground Floor
10.89
30053
2759.4
... More
First Floor
10.89
30344
2786.1
... More
NON SOR
-
-
-
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited/ Tata Pravesh Jindal/NCL or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares.The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.
16.8
134400
8000
... More
Supply and fixing of pre-painted NCL / Tata / Jindal or equivalant make Seccolor Louvered Ventilators made of pre.- painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work.
5.04
24272
4816
... More
Providing and Fixing WINSPIRE /Kommerling /Fenesta or equivalent make Sliding Systems Windows fabricated from Roll formed.sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm with Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick and Section for Outer frame 2 Track should be of 59x44mm, Section for shutter should be of 35X49 for window. Section for Euro Groove should be 25x24 and for Lap Strip should be 30x41.Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl.Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single Wheel Rollers for Windows should be provided.Glass shutter should be provided with a Glass of 5mm.The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of.nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames.
52.2
287100
5500
... More
Providing and Fixing NCL/ Jindal Seccolor Structural Glazing fabricated from Roll.formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry.wall should be with self-expanding cap & screws.
28.8
144000
5000
... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Greenply/Sylvan or equivalent make make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
26.36
118597
4500
... More
Providing "RAJSHRI/ Armstrong/ Alstonoe equivalent Brand factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately)
54.55
39373
721.78
... More
Providing and fixing Series casement door fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.58 mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Frame and Shutter Frame Sections should be cut to length and mitre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter.Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm,and Section for Fixed Glass Bead should be of 12mm x 12mm.Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Glazed Shutter and Fixed Glass portions should be provided with a glass of 8mm Plain toughened Float Glass. The work is inclusive all materials, labour, T&P, scaffolding, transportation etc complete as per direction of EIC. Make NCL/Tata/Jindal or equivalent
4.2
24360
5800
... More
SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities, damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.
25.47
12733
500
... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 1200mm ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
46.26
84253
1821.3
... More
Providing vitrified tile flooring using antiskied Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
Ground Floor
25.45
46355
1821.3
... More
First Floor
25.45
46622
1831.8
... More
Terrace Floor
3.53
6496
1842.9
... More
E.I Works
-
-
-
... More
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab)
Light point Group A (1.1.1)
60
28318
471.98
... More
-do- .... Light point Group B (1.1.2)
25
17851
714.06
... More
-do- ....Light point Group C (1.1.3)
28
28524
1018.74
... More
S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
12
2732
227.69
... More
S/F of extension board of 4 modular Metal box with modular base & cover in recess including providing and fixing of 3pin 5/6amp modular socket out let & 5/6 amp piano type modular switch, connection, painting etc as required. (1.26)
28
12844
458.74
... More
S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.2.7)
12
7557
629.75
... More
S/F of 12 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch with 1no 5 pin 15/16 amp. Modular Socket out let & 15/16amp. Modular type switch ,connection,painting etc. as required (1.25.1+1.25.4)
2
2222
1111.46
... More
Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) (LDB to LSB/LIGHT CKT)
266
35633
133.96
... More
-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) (BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR)
296
43781
147.91
... More
-do-4x2.5sqmm +2x2.5sqmm ( 1.8.8 ) (PDB to PSB)
200
40800
204
... More
-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) (PDB to PSB)
200
33058
165.29
... More
-do- 4x4sqmm +2x2.5sqmm ( 1.8.9 ) (PDB to PSB)
75
18589
247.86
... More
-do- 2x6sqmm +1x2.5sqmm ( 1.8.4 ) (LFDB TO LBDB)
16
3141
196.37
... More
-do- 4x6sqmm +2x2.5sqmm ( 1.8.10 )
34
9988
293.79
... More
-do- 4x10sqmm + 2x4.0sqmm ( 1.8.11 )
34
14315
421.04
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge ( Make-Havells/C & S/Legrand)
4
2488
622
... More
S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.
2 Modular box with base & cover (1.24.2)
4
886
221.54
... More
4 Modular box with base & cover (1.24.3)
10
2688
268.83
... More
8 Modular box with base & cover (1.24.5)
14
5172
369.43
... More
12 Modular box with base & cover (1.24.6)
4
1928
482.08
... More
S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)
4
3132
783
... More
S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30)
2
248
124.27
... More
S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)
12
199
16.59
... More
Supply, Installation,Testing and Commissioning of Exhaust fan of 225mm sweep in the existing opening,including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (Make- USHA/ Orient / Almonard)
4
8314
2078.61
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Bajaj or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge.
4
14692
3673
... More
Supply & Fixing of 48" A.C. ceiling fan without regulator incudig numbering of reputed mark including all connections (Make:Usha-Striker Millenium / Crompton-Jura / Havells-Velopcity/ Spark/ Anchor-XL/ Orient-Summer Pride )
19
46287
2436.2
... More
S/F of Modular electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38)
19
11072
582.78
... More
S/F of 18-20 watt LED Surface ceiling light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / Orient)
4
7906
1976.54
... More
S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
70
48538
693.41
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved. )
8
5888
736
... More
S/F of 45-48 watt LED street light fitting complete with all connection.\ including fixing of bracket and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
4
22916
5729.04
... More
S/F of Extra downrod 20mm dia (20 cm) (1.41)
40
1207
30.19
... More
S/F of 4way (4+12) TPN Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.5.5 (FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)
4
8692
2173.16
... More
S/F of 2+4 way MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.4.1 (only each EM. CONNECTION UPS LOAD)
2
3124
1562.47
... More
S/Fof 'B' series DP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.2)
2
669
334.58
... More
S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)
56
7481
133.6
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make : L&T / Legrand / C&S)
2
6049
3024.51
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make : L&T / Legrand / C&S)
2
4580
2290.32
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make : L&T / Legrand / C&S)
2
6925
3462.93
... More
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick and 25mm x 5mm copper tape (1.15Kg. Per Mtr.) 3.5Mtr. & 20mm G.I.pipe medium class 2.7 Mtr. ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt as required. (3.5 + 3.6)
2
11321
5660.74
... More
Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18)
55
5487
99.77
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required (3.15)
2
1094
547.28
... More
Supply of 2.5mmsq 3 Core alluminium armoured cable (for small power,street light)
50
4807
96.14
... More
S/F of 35mmsq 3½ Core alluminium armoured cable (Make: Nico/ Polycab/ Glostar / Havells)
40
15109
377.74
... More
Laying of 35mmsq 3½ Core cable in ground
40
5930
148.26
... More
Supplying and making end termination with brass compression gland and aluminum lugs for 35mmsq 3½ Core cable (5.8.21)
4
1350
337.55
... More
Supply, instaliatiion,Testing and commissioning of 125A, TPN panel board made of 16 SWG with provision of Incoming:- (a) 125A 4P MCCB 1No., (b) 125Amp 4P Change over -1No.
(c) Copper bus-bar (25mm x 5mm copper flat) -1 Set., Out going:- (a) 63A 4P MCB -2Nos., (b) 32A 4P MCB -2Nos., Instrument:-
(i) 01 Set of 0-100Amps MFM & CTS (DIGITAL) , 3Nos. LED phase indicator and danger plate (Make: Legrand / L&T / Havells / C&S)
1
66851
66851.06
... More
P.H Works
-
-
-
... More
A- Internal PH Work
-
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. Ground Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme)
25
6232
249.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
40
14176
354.4
... More
In 1st Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme)
15
3829
255.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
35
12624
360.7
... More
32mm dia C-PVC pipe (Ashirbad/Supreme)
22
11464
521.1
... More
In 2nd Floor
-
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme)
80
55168
689.6
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall in Ground floor
12
656
54.7
... More
In 1st Floor
11
640
58.2
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
1
191
191.8
... More
In 1st Floor
10
2085
208.5
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
65
12532
192.8
... More
In 1st Floor
50
10185
203.7
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking PVC pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall
-
-
-
... More
in Ground Floor to Ist Floor
16
3217
201.1
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP Long Body Bib cock (Jaquar)
13
20891
1607
... More
15mm dia CP angle stop cock (Jaquar)
26
26855
1032.9
... More
20mm dia CP consealed stop cock (Jaquar)
5
9348
1869.6
... More
15mm dia CP two in one bib cock (Jaquar)
11
15240
1385.5
... More
15mm dia CP Health faucet (Jaquar)
11
14969
1360.9
... More
15mm dia CP extension piece
50
3830
76.6
... More
15mm dia CP Pillar cock (Jaquar)
12
21753
1812.8
... More
25mm dia G.M or Brass F.W valve (Sakti make)
10
13709
1370.9
... More
32mm dia PVC F.W valve
1
1632
1632.1
... More
40mm dia PVC F.W valve
3
6296
2098.9
... More
125mm dia CP gratings
32
2745
85.8
... More
15mm dia CP revolving shower (Jaquar make)
5
13006
2601.3
... More
15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)
6
13731
2288.5
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres PVC L.L. Cistern (Slimline-white)
14
26824
1916
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 75mm dia U-PVC SWR pipes(Supreme/Ashirvad)
10
2300
230
... More
75mm U-PVC plain bend
6
687
114.6
... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
175
66832
381.9
... More
110mm U-PVC door bend
6
1506
251.1
... More
110mm U-PVC door Tee
26
9193
353.6
... More
110mm U-PVC plain Tee
26
8223
316.3
... More
110mm dia U-PVC offset without ear
13
3264
251.1
... More
110mm U-PVC plain bend
28
5812
207.6
... More
110mm U-PVC vent cowl
14
1188
84.9
... More
110mm dia U-PVC 'P' trap
8
3048
381.1
... More
110mm dia U-PVC socket plain
3
480
160.1
... More
75mm dia U-PVC socket plain
1
81
81.3
... More
PVC Clamp
30
1284
42.8
... More
110mm U-PVC door cross Tee
1
423
423
... More
Supplying all materials, labour T&P and fixing water closet, (Orissa pattern squating pan) duly embeded in c.c. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.-- 580mm size Orissa pan(Hindware/Parryware/Neycer)
4
11634
2908.7
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.Halfstall wall Urinal (Parryware/Hindware/Neycer)
6
37547
6257.9
... More
15mm dia Urinal spreder
6
3331
555.3
... More
32mm dia Dome waste
6
771
128.5
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.E.W.C. (Parryware/Hindware/Neycer)
10
32590
3259
... More
Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware)
10
7516
751.6
... More
EWC (Matrix set) Hindware No.70002(P-18) (WHB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)
1
66589
66589.4
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware)
8
24902
3112.8
... More
Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware)
8
19386
2423.3
... More
Under Counter basin(560x450)Hindware-No.10095
4
15491
3872.8
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mm x 450mm size B.E mirror
12
9819
818.3
... More
Large size mirror with frame
5.4
9633
1784
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600 x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic)
5
3625
725
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)
15
15337
1022.5
... More
CP towel Ring (Plaza/Amber/Aquatic)
18
9842
546.8
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder (Plaza/Amber/Aquatic)
33
10480
317.6
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600 x 450 x 250mm size S/S kitchen sink (Jayana make )
2
9145
4572.6
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ist Floor
61.62
10604
172.1
... More
Providing and laying Sika top seal 109 hi over roof top slab and parapet ,toilet inside after cleaning of surface and applied with a coat of Sika 109 hi primer as per approved specification.The Sika shall be laid between two coats of water proofing membrance and the entire application cover with Sika top seak hi curing,compound of all materials and cost of labour T&P etc.complete as per the direction of the Engineer-in-charge. In Ist Floor
61.62
45447
737.55
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
6.7
3343
499
... More
In 1st Floor
5.84
2963
507.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor
4.47
30104
6734.8
... More
In 1st Floor
3.89
27474
7062.8
... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Gully Trap chamber
6
12283
2047.2
... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mm x 760mm x 460mm
3
28443
9481.3
... More
Supplying all materials, labour, T&P and providing marble slab in urinal partition wall including cutting grooves in walls and making good the damages including watering curing etc all complete as per specification and direction of the E.I.C.
2.16
2952
1367.1
... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
12.3
32223
2619.8
... More
EXTERNAL PH WORK
-
-
-
... More
Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 No.
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only. Drilling of 200mm dia bore 0 to 30 mtr
30
23478
782.6
... More
Drilling of 200mm dia bore 31 to 45 mtr
15
11739
782.6
... More
Drilling of 150mm dia bore 41 to 125 mtr
25
19565
782.6
... More
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials. Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs
30
5415
180.5
... More
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs
15
2707
180.5
... More
Cost of 200mm dia PVC schedule - 80 pipe
45.5
80789
1775.6
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
1
6586
6586
... More
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing. Sanitary sealing upto 5 mtr below ground level
1
1173
1173.1
... More
CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth
0.2
1346
6734.8
... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 2HP Three Phase 5 stage submersible pump set.
1
16625
16625.6
... More
DOL control panel
1
3805
3805.5
... More
50mm S. S. Nipple, S. S. bolt & clips
2
2000
1000
... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
1
1200
1200
... More
2.50mm Sqm Submersible flat cable
120
15372
128.1
... More
Steel rope with cover
80
2136
26.7
... More
20mm dia rigid U-PVC pipe
60
414
6.9
... More
50mm dia HDPE pipe
50
9090
181.8
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
1
2000
2000
... More
Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.2 HP 3 phaseHorizontal submerssible pump set.
1
16625
16625.6
... More
DOL control panel
1
3805
3805.5
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge. 50mm dia PVC ASTM
50
20395
407.9
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge. 50mm dia CPVC pipe (sch-80)
10
10522
1052.2
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
13.5
3019
223.7
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.50mm dia Brass N. R. Valve
1
2087
2087
... More
50mm dia Brass F. W. Valve
2
5113
2556.6
... More
Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge. Inside size 250mm x 250mm x 560mm
2
2303
1151.9
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mm x 910mm x 910mm
4
71257
17814.4
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly Ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge . 1.40m dia x 2.00m deep soakway pit
1
21892
21892.1
... More
1.20m dia x 2.00m deep soakway pit
2
37233
18616.8
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
51
65366
1281.7
... More
160mm dia u-pvc pipe alround concrete
40
95284
2382.1
... More
Construction 1 No 50 users RCC Septic tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
34.88
7802
223.7
... More
2nd Depth of 1.5 m
23.12
5551
240.1
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
3.62
2293
633.6
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
2.41
12195
5060.2
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash .bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. -- In Foundation & Plinth in CM (1:4)
0.9
4768
5298.2
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.39
9545
6867.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
23.01
174112
7566.8
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. For Roof slab
24.01
16132
671.9
... More
For RCC wall
123
124389
1011.3
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
23.01
213079
9260.3
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
90
18162
201.8
... More
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.- 12mm thick C.P with C.M. (1:6)
7.2
1090
151.5
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm PVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
1065
532.9
... More
Providing and fixing in position Polyproplene Foot steps of required shape and approved quality as per the direction of E.I.C.
10
2734
273.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
1355
125.5
... More
Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of 2000 liter capacity FG Over Head Tank) on roof of 1st Floor
3
64707
21569.3
... More
Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class KB. brick work in c.m, (1:6) of 0.46m. height in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size KB. bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.64mtr xl.64mtr x0.l0mtr thick, R.C.C. beam of size 0.25m X 0.30m and 2.61m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C (2000 liter capacity FG Over Head Tank on roof of 1st Floor)
3
52377
17459
... More
Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles.Ground Floor
40.41
48132
1191.1
... More
First Floor
40.41
49057
1214
... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground Floor
120.44
150622
1250.6
... More
First Floor
98.6
126543
1283.4
... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete. ground floor and first floor
32.29
139271
4313.4
... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete. ground floor and first floor
95.55
59833
626.2
... More
CONSTRUCTION OF 500 CAPACITY MULTI PURPOSE HALL AT Jodabar FOR THE YEAR -2023-24
-
-
-
... More
Civil Works
-
-
-
... More
Providing & erecting necessary plants, equipments and labour for boring holes and casting of 450 mm dia bored cast-in-situ single under reamed RCC M30 piles conforming to IS2911( Part-II )below the finished ground levelas per drawing or as directed by the Engineer -in -charge.
858
1769873
2062.79
... More
Earth work in excavation in hard soil by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) inculding disposal of excavated earth up to 50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
63.31
13092
206.8
... More
Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge.
18.99
2182
114.9
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. Measurement will be taken on finished compacted section only).
259.8
185108
712.5
... More
Carriage of excavated earth by mechanical means within 5 KM lead
44.32
12355
278.8
... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.
75.68
408118
5392.6
... More
Providing and laying in position ready mixed M-30 grade concrete having compressive strength at 28 days test not less than 300 kg/ sq.cm for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cess and T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge.
-
-
-
... More
Ground floor
-
-
-
... More
Pile caps
33.76
255171
7558.4
... More
RCC in Plinth beam
24.1
182189
7558.4
... More
RCC in column
47.62
689494
14479.4
... More
RCC in Roof beam
38.47
556968
14479.4
... More
Roof slab
66.24
868229
13108.3
... More
RCC in S.case
17.37
250774
14433.3
... More
RCC in Lintel
6.05
83333
13763.3
... More
Chhaja
30.72
33398
1087.2
... More
First floor
-
-
-
... More
RCC in column
34.75
562551
16189
... More
RCC in Roof beam
34.84
564085
16189
... More
Roof slab
54.11
786928
14543.8
... More
RCC in S.case
11.19
180589
16133.8
... More
RCC in Lintel
6.02
92227
15329.8
... More
Chhaja
13.65
16756
1227.6
... More
Terrace Floor
-
-
-
... More
RCC in column
9.9
180537
18236.1
... More
RCC in Roof beam
4.92
89653
18236.1
... More
Roof slab
11.78
191508
16261.8
... More
RCC in Lintel
1.41
24276
17205
... More
Chhaja
11.12
15525
1395.7
... More
Cutting,straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding, tying the grills as required for R.C.C. works, providing Fan Hooks where necessary and hoising, lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550
-
-
-
... More
Ground floor
399.65
3544655
8869.4
... More
First floor
174.45
1551750
8895.1
... More
Second floor
35.38
315660
8922
... More
Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
-
-
-
... More
Brick work in foundation
35.78
177382
4957.6
... More
Ground floor
82.39
411612
4995.9
... More
First floor
97.9
517264
5283.6
... More
Terrace Floor
26.94
151251
5614.4
... More
Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side)
-
-
-
... More
Ground floor
983.12
151892
154.5
... More
First floor
884.52
141877
160.4
... More
Terrace floor
339.93
56666
166.7
... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside)
-
-
-
... More
Ground floor
593.24
130394
219.8
... More
First floor
505.99
113898
225.1
... More
Terrace floor
72.02
16607
230.6
... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) at all height using screened & washed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns, Landings, Railings, Chajja ,Fins ,Walls ,Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and all taxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering, Curing etc. complete in all respect as directed by the Engineer- in- charge.
-
-
-
... More
Ground floor
579.46
98739
170.4
... More
First floor
415.86
72609
174.6
... More
Terrace floor
63.96
11442
178.9
... More
Priming one coat with water bound wall cement primer. (Outside)
-
-
-
... More
Ground floor
983.12
66753
67.9
... More
First floor
884.52
62447
70.6
... More
Terrace floor
339.93
24917
73.3
... More
Finishing wall surface of walls with cement based wall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance ,taxes of all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
Ground floor
1172.7
89124
76
... More
First floor
921.86
70061
76
... More
Terrace floor
135.98
10334
76
... More
Wall painting two coats with Acrylic paint(plastic emulsion) of approved quality of premium brand of approved quality & colour at all heights to the interior surface of the wall to make an even finished surface including sand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking, all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge.
-
-
-
... More
Ground floor
821.15
132040
160.8
... More
First floor
570.3
93586
164.1
... More
Terrace floor
135.98
22777
167.5
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
... More
Ground floor
983.12
149826
152.4
... More
First floor
884.52
139666
157.9
... More
Terrace floor
339.93
55612
163.6
... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick matte Vitrified Tile ( of size 600m.m x 600 m.m ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
Ground floor
265.64
302063
1137.1
... More
First floor
265.64
304879
1147.7
... More
Providing vitrified tile flooring using matte Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 600mmX600mm colour/printed series (homogeneous) of approved quality, colour or equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost, conveyance, loading, unloading, royalties and taxes of all materials,cost of all labour, sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/ Kajaria/ Rak/ Ceramic or equivalent
-
-
-
... More
Ground floor
149.7
186062
1242.9
... More
First floor
149.7
188442
1258.8
... More
Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Make Johnson/ Kajaria/ Rak/ Ceramic or equivalent
-
-
-
... More
Ground floor
29.16
28818
988.3
... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor
-
-
-
... More
Ground floor
163.59
53786
328.8
... More
First floor
417.56
149945
359.1
... More
Terrace floor
94.21
37110
393.9
... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials, priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
5146.29
443507
86.18
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
Ground floor
121.91
24637
202.1
... More
First floor
77.42
16057
207.4
... More
Terrace floor
18.9
4023
212.9
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
-
-
-
... More
Ground Floor
365.48
98350
269.1
... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
62.42
185680
2974.7
... More
First Floor
57.5
172287
2996.3
... More
Terrace Floor
39.36
118823
3018.9
... More
Filling Sunken portion with broken AAC blocks including cost of all materials, labours, Conveyance, T&P etc. all complete as per the direction of Engineer-In-Charge.
-
-
-
... More
Ground floor
15.09
41644
2759.4
... More
First floor
15.09
42047
2786.1
... More
NON SOR
-
-
-
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer OEM ( Navir or Unistar/ Mediunited/ Tata Pravesh Jindal/NCL or equivallent ). All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following:
4 nos Hinges on each leaf
1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock
1 Set D-type pull handle back to back on each leaf
1 no Concealed flush bolt in inactive leaf of Double door, if any
1 no vision glass on each leaf
Fastners as required.
The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC.
21
168000
8000
... More
Supply and fixing of pre-painted NCL / Tata / Jindal or equivalant make Seccolor Louvered Ventilators made of pre.- painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 33 x 57 mm Box Section for mullion 33 x 57 mm, and section for beading should be 12 x 25 mm with 4 mm pinhead glass for ventilators with Ethyl propylene Damien monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws complete for finished item of work.
5.04
24272
4816
... More
Providing and Fixing WINSPIRE /Kommerling /Fenesta or equivalent make Sliding Systems Windows fabricated from Roll formed.sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm with Coated sections should be with Primer coat of epoxy primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, OR powder coated with pure polyester powder up to 50-60 microns thick and Section for Outer frame 2 Track should be of 59x44mm, Section for shutter should be of 35X49 for window. Section for Euro Groove should be 25x24 and for Lap Strip should be 30x41.Corner brackets made of glass filled nylon/CRCA with zinc phosphating. Gasket made of Ethyl.Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows. Single Wheel Rollers for Windows should be provided.Glass shutter should be provided with a Glass of 5mm.The frame & shutter Sections Should be cut to length, joined with Corner Brackets made of.nylon/CRCA. Ethyl Propylene Diamine Monomer (EPDM) Gasket Should be used all around glass. Windows Frame should be fixed to brick/concrete masonry by using Nylon self- Expanding sleeves and diving MS electroplated 80mm long screws into sleeves through the frames.
64.35
353925
5500
... More
Providing and Fixing NCL/ Jindal Seccolor Structural Glazing fabricated from Roll.formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.58mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry.wall should be with self-expanding cap & screws.
28.8
144000
5000
... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Greenply/Sylvan or equivalent make make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
34.65
155925
4500
... More
Providing "RAJSHRI/ Armstrong/ Alstonoe equivalent Brand factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K Value 57-60 ( Suspension Grade 1 Calcium Carbonate Per Run. and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Nontoxic additives fabricated with Ft. mater joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ chin & manufactured by "RAJSHRI" an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2. Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/Moisture Proof & Fire retardant & Fixed in position with $5 Dash Fasteners/Hold Fast of required dia and length. all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasters shall be paid separately)
76.5
55216
721.78
... More
SITC of Sunken floor treatment stage1:Cleaning of concrete surface to remove dust,oil,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any,with Sika Latest modified repair mortar including a coat of bonding agent.stage2:supply and application of 1:3 cement-sand mortar,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area.
150.92
75460
500
... More
Providing and fixing Series casement door fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.58 mm.Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Frame and Shutter Frame Sections should be cut to length and mitre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter.Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm,and Section for Fixed Glass Bead should be of 12mm x 12mm.Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Glazed Shutter and Fixed Glass portions should be provided with a glass of 8mm Plain toughened Float Glass. The work is inclusive all materials, labour, T&P, scaffolding, transportation etc complete as per direction of EIC. Make NCL/Tata/Jindal or equivalent
8.4
48720
5800
... More
Providing, Fitting & Fixing of 8 mm. to 12mm. thick anti skid Vitrified Tile ( of size 300 x 1200mm ) of printed series confirming to IS specifications having minimum breaking strength 1400 kg/sq.cm in flooring in all floors at all heights on 20mm thick bed of cement mortar(1:4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. including filling the joints with silicon sealant to match the shade of Vitrified Tile as per the design & drawing including cost, conveyance, loading, unloading, stacking,royalties and taxes of all materials, cost of all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect as directed by the Engineer-in-Charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
Ground Floor
162.48
295924
1821.3
... More
First Floor
31.98
58580
1831.8
... More
Providing vitrified tile flooring using antiskied Vitrified tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 of 300mmX1200mm colour/printed series (homogeneous) of approved quality,colour in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost,conveyance,loading,unloading,royalties and taxes of all materials,cost of all labour,sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. Make Johnson/Kajaria/Rak/Ceramic or equivalent
-
-
-
... More
Ground Floor
25.45
46355
1821.3
... More
First Floor
25.45
46622
1831.8
... More
Terrace floor
3.53
6496
1842.9
... More
E.I Works
-
-
-
... More
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Light point Group A (1.1.1)
88
41534
471.98
... More
-do- .... Light point Group B (1.1.2)
30
21421
714.06
... More
-do- ....Light point Group C (1.1.3)
44
44822
1018.7
... More
S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)
16
3643
227.69
... More
S/F of extension board of 4 modular Metal box with modular base & cover in recess including providing and fixing of 3pin 5/6amp modular socket out let & 5/6 amp piano type modular switch, connection, painting etc as required. (1.26)
36
16514
458.74
... More
S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.2.7)
19
11965
629.75
... More
S/F of 12 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch with 1no 5 pin 15/16 amp. Modular Socket out let & 15/16amp. Modular type switch ,connection,painting etc. as required (1.25.1+1.25.4)
2
2222
1111.46
... More
Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) (LDB to LSB/LIGHT CKT)
276
36972
133.96
... More
-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) (BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR)
354
52360
147.91
... More
-do-4x2.5sqmm +2x2.5sqmm ( 1.8.8 ) (PDB to PSB)
233
47532
204
... More
-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) (PDB to PSB)
211
34876
165.29
... More
-do- 4x4sqmm +2x2.5sqmm ( 1.8.9 ) (PDB to PSB)
88
21811
247.86
... More
-do- 2x6sqmm +1x2.5sqmm ( 1.8.4 ) (LFDB TO LBDB)
21
4123
196.37
... More
-do- 4x6sqmm +2x2.5sqmm ( 1.8.10 )
38
11164
293.79
... More
-do- 4x10sqmm + 2x4.0sqmm ( 1.8.11 )
38
15999
421.04
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make-Havells/C & S/Legrand)
4
2488
622
... More
S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.
2 Modular box with base & cover (1.24.2)
6
1329
221.54
... More
4 Modular box with base & cover (1.24.3)
10
2688
268.83
... More
8 Modular box with base & cover (1.24.5)
16
5910
369.43
... More
12 Modular box with base & cover (1.24.6)
4
1928
482.08
... More
S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)
4
3132
783
... More
S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30)
2
248
124.27
... More
S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)
16
265
16.59
... More
Supply, Installation,Testing and Commissioning of Exhaust fan of 225mm sweep in the existing opening,including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (Make- USHA/ Orient / Almonard)
7
14550
2078.61
... More
Supply, Installation,Testing and Commissioning of Exhaust fan of 380mm sweep in the existing opening,including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (Make- USHA/ Orient / Almonard)
8
29384
3673
... More
Supply & Fixing of 48" A.C. ceiling fan without regulator incudig numbering of reputed mark including all connections (Make:Usha-Striker Millenium / Crompton-Jura / Havells-Velopcity/ Spark/ Anchor-XL/ Orient-Summer Pride )
22
53596
2436.2
... More
S/F of Modular electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38)
22
12821
582.78
... More
S/F of 18-20 watt LED Surface ceiling light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / Orient)
4
7906
1976.54
... More
S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
104
72114
693.41
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : Philips/Bajaj/Lightting Technology or equievalant reputed make & model A catagory ISI marked as approved. )
8
5888
736
... More
S/F of 60 watt LED street light fitting complete with all connection.\ including fixing of bracket and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
4
31295
7823.9
... More
S/F of Extra downrod 20mm dia (20 cm) (1.41)
41
1237
30.19
... More
S/F of 4way (4+12) TPN Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.5.5 (FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)
4
8692
2173.16
... More
S/F of 2+4 way MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.4.1 (only each EM. CONNECTION UPS LOAD)
2
3124
1562.47
... More
S/Fof 'B' series DP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.2)
2
669
334.58
... More
S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)
56
7481
133.6
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make : L&T / Legrand / C&S)
2
6049
3024.51
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make : L&T / Legrand / C&S)
2
4580
2290.32
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge (Make : L&T / Legrand / C&S)
2
6925
3462.93
... More
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick and 25mm x 5mm copper tape (1.15Kg. Per Mtr.) 3.5Mtr. & 20mm G.I.pipe medium class 2.7 Mtr. ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt as required. (3.5 + 3.6)
2
11321
5660.74
... More
Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18)
66
6584
99.77
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required (3.15)
3
1641
547.28
... More
Supply of 2.5mmsq 3 Core alluminium armoured cable (for small power,street light)
56
5383
96.14
... More
S/F of 35mmsq 3½ Core alluminium armoured cable (Make: Nico/ Polycab/ Glostar / Havells)
46
17376
377.74
... More
Laying of 35mmsq 3½ Core cable in ground
46
6819
148.26
... More
Supplying and making end termination with brass compression gland and aluminum lugs for 35mmsq 3½ Core cable (5.8.21)
4
1350
337.55
... More
Supply, instaliatiion,Testing and commissioning of 125A, TPN panel board made of 16 SWG with provision of Incoming:- (a) 125A 4P MCCB 1No., (b) 125Amp 4P Change over -1No.
(c) Copper bus-bar (25mm x 5mm copper flat) -1 Set., Out going:- (a) 63A 4P MCB -2Nos., (b) 32A 4P MCB -2Nos., Instrument:-
(i) 01 Set of 0-100Amps MFM & CTS (DIGITAL) , 3Nos. LED phase indicator and danger plate (Make: Legrand / L&T / Havells / C&S)
1
66851
66851.06
... More
P.H Works
-
-
-
... More
Internal work
-
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme)
30
7479
249.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
40
14176
354.4
... More
In 1st Floor
-
-
-
... More
20mm dia C-PVC pipe (Ashirbad/Supreme)
20
5106
255.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
30
10821
360.7
... More
32mm dia C-PVC pipe (Ashirbad/Supreme)
20
10422
521.1
... More
In 2nd Floor
-
-
-
... More
40mm dia C-PVC pipe (Ashirbad/Supreme)
85
58616
689.6
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
250mm thick wall in Ground floor
14
765
54.7
... More
In 1st Floor
13
756
58.2
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor
2
383
191.8
... More
In 1st Floor
8
1668
208.5
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
70
13496
192.8
... More
In 1st Floor
50
10185
203.7
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking PVC pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
-
-
-
... More
250mm to 375mm thick wall
-
-
-
... More
in Ground Floor to Ist Floor
30
6033
201.1
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15mm dia CP Long Body Bib cock (Jaquar)
16
25712
1607
... More
15mm dia CP angle stop cock (Jaquar)
32
33052
1032.9
... More
20mm dia CP consealed stop cock (Jaquar)
5
9348
1869.6
... More
15mm dia CP two in one bib cock (Jaquar)
19
26324
1385.5
... More
15mm dia CP Health faucet (Jaquar)
19
25857
1360.9
... More
15mm dia CP extension piece
69
5285
76.6
... More
15mm dia CP Pillar cock (Jaquar)
12
21753
1812.8
... More
25mm dia G.M or Brass F.W valve (Sakti make)
15
20563
1370.9
... More
32mm dia PVC F.W valve
1
1632
1632.1
... More
40mm dia PVC F.W valve
4
8395
2098.9
... More
125mm dia CP gratings
33
2831
85.8
... More
15mm dia CP revolving shower (Jaquar make)
5
13006
2601.3
... More
15mm dia CP Auto closing Urinal Flush Valve (PRS-CHR-077 Jaquar make)
8
18308
2288.5
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
10 litres PVC L.L. Cistern (Slimline-white)
18
34488
1916
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
... More
75mm dia U-PVC SWR pipes(Supreme/Ashirvad)
4
920
230
... More
75mm U-PVC plain bend
6
687
114.6
... More
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
174
66450
381.9
... More
110mm U-PVC door bend
6
1506
251.1
... More
110mm U-PVC door Tee
28
9900
353.6
... More
110mm U-PVC plain Tee
23
7274
316.3
... More
110mm dia U-PVC offset without ear
16
4017
251.1
... More
110mm U-PVC plain bend
26
5397
207.6
... More
110mm U-PVC vent cowl
16
1358
84.9
... More
110mm dia U-PVC 'P' trap
10
3811
381.1
... More
110mm dia U-PVC socket plain
5
800
160.1
... More
75mm dia U-PVC socket plain
1
81
81.3
... More
PVC Clamp
30
1284
42.8
... More
110mm U-PVC door cross Tee
2
846
423
... More
Supplying all materials, labour T&P and fixing water closet, (Orissa pattern squating pan) duly embeded in c.c. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.--
-
-
-
... More
580mm size Orissa pan(Hindware/Parryware/Neycer)
4
11634
2908.7
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. Halfstall wall Urinal (Parryware/Hindware/Neycer)
8
50063
6257.9
... More
15mm dia Urinal spreder
8
4442
555.3
... More
32mm dia Dome waste
8
1028
128.5
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. E.W.C. (Parryware/Hindware/Neycer)
14
45626
3259
... More
Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware)
14
10522
751.6
... More
EWC (Matrix set) Hindware No.70002(P-18) (WHB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)
1
66589
66589.4
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware)
8
24902
3112.8
... More
Supplying all materials, labour T&P and fixing Pedestal for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Neycer/Parrywear/Cerra/Hindware)
8
19386
2423.3
... More
Under Counter basin(560x450)Hindware-No.10095
4
15491
3872.8
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mm x 450mm size B.E mirror
8
6546
818.3
... More
Large size mirror with frame
6.12
10918
1784
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600 x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic)
5
3625
725
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mm x 600mm long CP towel rail (Plaza/Amber/Aquatic)
19
19427
1022.5
... More
CP towel Ring (Plaza/Amber/Aquatic)
20
10936
546.8
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder (Plaza/Amber/Aquatic)
39
12386
317.6
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600 x 450 x 250mm size S/S kitchen sink (Jayana make )
3
13717
4572.6
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ist Floor
75.24
12948
172.1
... More
Providing and laying Sika top seal 109 hi over roof top slab and parapet ,toilet inside after cleaning of surface and applied with a coat of Sika 109 hi primer as per approved specification.The Sika shall be laid between two coats of water proofing membrance and the entire application cover with Sika top seak hi curing,compound of all materials and cost of labour T&P etc.complete as per the direction of the Engineer-in-charge. In Ist Floor
75.24
55493
737.55
... More
Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
8.47
5366
633.6
... More
In 1st Floor
7.61
4878
641
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. -In Ground Floor
5.65
38800
6867.3
... More
In 1st Floor
5.07
36480
7195.4
... More
Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Gully Trap chamber
6
12283
2047.2
... More
Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mm x 760mm x 460mm
4
37925
9481.3
... More
Supplying all materials, labour, T&P and providing marble slab in urinal partition wall including cutting grooves in walls and making good the damages including watering curing etc all complete as per specification and direction of the E.I.C.
3.24
4429
1367.1
... More
Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge
3.38
3486
1031.5
... More
Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
15.68
41078
2619.8
... More
EXTERNAL PH WORK
-
-
-
... More
Sinking of 200mmx150mm dia Bore Well through DTH method.- 1 No.
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only. Drilling of 200mm dia bore 0 to 30 mtr
30
23478
782.6
... More
Drilling of 200mm dia bore 31 to 45 mtr
15
11739
782.6
... More
Drilling of 150mm dia bore 41 to 125 mtr
25
19565
782.6
... More
Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials. Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs
30
5415
180.5
... More
Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs
15
2707
180.5
... More
Cost of 200mm dia PVC schedule - 80 pipe
45.5
80789
1775.6
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
1
6586
6586
... More
Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing. Sanitary sealing upto 5 mtr below ground level
1
1173
1173.1
... More
CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth
0.2
1346
6734.8
... More
Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.2HP Three Phase 5 stage submersible pump set.
1
16625
16625.6
... More
DOL control panel
1
3805
3805.5
... More
50mm S. S. Nipple, S. S. bolt & clips
2
2000
1000
... More
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
1
1200
1200
... More
2.50mm Sqm Submersible flat cable
120
15372
128.1
... More
Steel rope with cover
80
2136
26.7
... More
20mm dia rigid U-PVC pipe
60
414
6.9
... More
50mm dia HDPE pipe
50
9090
181.8
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
1
2000
2000
... More
Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.2 HP 3 phaseHorizontal submerssible pump set.
1
16625
16625.6
... More
DOL control panel
1
3805
3805.5
... More
Labour charges for lowering, testing, commissioning & transportation to site etc.
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge. 50mm dia PVC ASTM
50
20395
407.9
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge. 50mm dia CPVC pipe (sch-80)
10
10522
1052.2
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
13.5
3019
223.7
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.50mm dia Brass N. R. Valve
1
2087
2087
... More
50mm dia Brass F. W. Valve
2
5113
2556.6
... More
Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge. Inside size 250mm x 250mm x 560mm
2
2303
1151.9
... More
Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mm x 910mm x 910mm
4
75477
18869.3
... More
Addl depth
4
11247
2811.8
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly Ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge . 1.40m dia x 2.00m deep soakway pit
1
21892
21892.1
... More
1.20m dia x 2.00m deep soakway pit
2
37233
18616.8
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete
51
65366
1281.7
... More
160mm dia u-pvc pipe alround concrete
35
83373
2382.1
... More
Construction 1 No 100 users RCC Septic tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge. Initial lift up to 1.50m
59.6
13332
223.7
... More
- do - with addl. Depth of 1.5 m
59.4
14261
240.1
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
6.09
3858
633.6
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
6.04
30563
5060.2
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. In ground floor
3.47
23829
6867.3
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash .bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. -- In Foundation & Plinth in CM (1:4)
0.9
4768
5298.2
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
32.07
242667
7566.8
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. For Roof slab
33.51
22515
671.9
... More
For RCC wall
163.2
165044
1011.3
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
25.65
237526
9260.3
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
112.5
22702
201.8
... More
Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.- 12mm thick C.P with C.M. (1:6)
7.2
1090
151.5
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 160mm x 160mm x 160mm PVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
1065
532.9
... More
Providing and fixing in position Polyproplene Foot steps of required shape and approved quality as per the direction of E.I.C.
10
2734
273.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
1355
125.5
... More
Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of 2000 liter capacity FG Over Head Tank) on roof of 1st Floor
5
107846
21569.3
... More
Supplying all materials, labour, T&P and Construction of masonary stagging with providing 1st class Fly ash brick work in c.m, (1:6) in staging and in circular protection wall to support the tank in roof of ground floor using 25cm x 12cm x 8cm size KB. bricks having crushing strength not less than 75 kg/cm2 12mm thick c.p.(1:4) over brick work, R.C.C. Slab of size 1.64mtr xl.64mtr x0.l0mtr thick, R.C.C. beam of size 0.25m X 0.30m and 2.61m average length in c.c.(1:1.5:3) using 12mm size h.g. chips including centering and shuttering, watering, curing conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C (2000 liter capacity FG Over Head Tank on roof of 1st Floor)
5
87295
17459
... More
Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles.Ground Floor
49.78
59292
1191.1
... More
First Floor
49.78
60432
1214
... More
Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground Floor
173.36
216804
1250.6
... More
First Floor
154.64
198464
1283.4
... More
Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete. ground floor and first floor
32.9
141910
4313.4
... More
Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete. ground floor
115.35
72232
626.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements