Public Health Engineering Organisation Tender

Supplying all materials, labour and T & P etc. and fixing Cast Iron Sluice Valve with double flanged ends & cost of Nut, Bolt, Rubber insertion etc. for water works purposes for the following rating and nominal diameter as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. 100mm dia. CI Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)

Supplying all materials, labour and T & P etc. and making Tyton joint using rubber rings to spun iron Cast Iron pipes and fittings of the following nominal diameter including testing of the joints as per specification and direction of the Engineer-in-charge including transportation of all materials to site, all complete. (Including Tyton Ring). 100mm dia. Rubber Tyton joint

Supplying all labour and T&P etc. and filling in pipe line trenches with the excavated earth, well watered & rammed as per specification and as directed by the Engineer-in-charge, all complete.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Transportation by truck/Tractor up to 5 Km lead (DEBRIS & SURPLUS EARTH), including loading unloading and spreading etc. all complete.

Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation, lean cement concrete (1:3:6) of 100mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 100mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Sluice valve Chamber (1.2mx1.2mx1.0m)

Supplying all materials, labour and T & P etc. and including spirally welded M.S pipes and offsets of specified diameter M.S. blank flange, painting the inside and outside surface of pipe with two coats of food grade black anti-corrosive paint of approved make as per I.S. specification with all lead and other taxes etc. including conveying of pipes and the specials and lowering at the trenches on proper bedding and jointing / welding with 3 runs of arc welding including supply of all jointing materials, welding rod, oxyacetylene gas, power supply for fabrication of specials at site with standby arrangement of diesel generator set and dewatering the pipe line etc. shoring and shuttering, barricading and inter-connection of M.S pipe with C.I pipe as per site condition and as per P.H. specification and direction of Engineer-In-Charge, including transportation of all materials to site, all complete.

MS Pipe cost

100mm dia. (4.5mm thick)(outer dia. 114.3 mm)

MS pipe cutting

MS pipe welding at site

Providing Flanged joints conforming to IS:3114-1994 to Flanged Cast Iron pipes and fittings of following nominal diameter including testing of joints, Cost of Bolts & Nuts and rubber insertions as per specification and direction of the Engineer-in-charge, all complete.

Supplying all materials, labour and T & P for Fixing Ferrule (Repair of House Connection) conforming to IS:2692-1978 of the 15mm dia.bore including drilling the water main (Cast Iron/DI pipes or pipes with the metal straps) as per specification, all complete.

Cost of fittings

100mm dia. Sluice Valve, Rating P.N – 1-60 ( I.S :14846 / 2000)-Make-Kirloskar/IVC)

Cost of MS Flanges

100mm dia. MS Flange

Supplying all materials, labour and T&P etc. and filling in foundation and plinth with sand, well watered and rammed including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mending good damages of road).

Supplying all materials, labour and T & P etc. and providing cement concrete (1:3:6) using 40mm size hard granite metal, as per specification and direction of the EIC, including transportation of all materials to site, all complete. (Mending good damages of road).

Supplying all materials, labour and T&P etc. and providing M-15 Cement Concrete ( 1:2:4 ) including hoisting and laying using 12mm size hard granite crusher broken chips, including transportation of all materials to site and as directed by the Engineer-in-charge, all complete. (Mending good damages of road).