Rural Development Department Tender

Providing laying, spreading and compacting stone aggregates Gr-III of specific size to Water bond macadum specification including spreding in uniform thickness,handpacking, rolling with three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying, brooming requisite type of screenig/binding materials to fillup the interstices of coarse aggregate(Excluding GST) , watering and compcting to the requred density as per clause 404 of MoSRT&H specification for Road Brige works(4th Revision)

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 kg per sqm on the preparedbituminous/ granular surfaces cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoSRT&Hspecification for road & bridge works Including cost, conveyance, cess, taxcess(Excluding GST), royality of materials etc. complete required for the work as per specification and direction of Engineer- in charge

Providing , laying,labour for scraping cleaning the road surface applying tack coat using 3.0kg of bitumen for 10sqm and laying 37.50 mm thick built up spray grouting in one layer using 0.45 cum of 25mm to 40mm size hard granite metal and 12.0kg penetration grade of bitumen for 10sqm in each layer with 0.12 cum of 12mm size hard granite chips as key stone for 10sqm spreding over and laying including heating pouring and spreding over and spreading bitumen metal and chips and rolling with PRR.Including cost, conveyance, cess, taxcess(Excluding GST), royality of materials used for the work ,,Bitumen,hire and running charges of PRR , all other machinaries etc. complete required for the work as per specification and direction of Engineer- in charge.

Providing and laying semi dense bituminous concrete with batch type of hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen with addition of processed waste platic of above 10% weight of bitumen, transported to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge works with all cost of labour,material(Excluding GST), royality of materials etc. complete required for the work as per specification and direction of Engineer- in charge.

Construction of Panelled cement concrete pavement, thickness as per design, over a prepared sub-base, with 43 grade cement or any other type as per Clause 1501.2.2, M30 (grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridges and culverts (expansion joints), admixtures as approved, curing of concrete slabs for 14 days, curing compound and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.Including all cost of labourT&P(Excluding GST), cost of transportation, hire charges etc. complete as per specification and direction of the Engineer-in-charge.

Restoration of raincuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and technical specification Clause 1902.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures .....as per approved drawing Clause 1701.2.2 of MoRD and as per the direction of the Engineer-in-charge.

Providing reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and T&P, cost of transportation,royality, hire charges,taxes(Excluding GST) etc. complete as per specification and direction of the Engineer-in-charge.

Ordinary KM stone

200m stone

Supplying ,fitting, fixing of RCC guard posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate,true to line and grade,tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification. Including all cost of labourT&P(Excluding GST), cost of transportation, hire charges etc. complete as per specification and direction of the Engineer-in-charge.

White washing two coats with approved brand on concrete work, parapet wall, tree trunks, guard post after through cleaning of surface to give an even shade including all cost of labour,cost of colur,brushes,T&P, all taxes(Excluding GST) etc.complete as per specification and direction of the Engineer-in-charge.

Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 of MORD and as per direction of the Engineer in charge.

Earth work in hard soil or gravelly soil on road side berms with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means with ordinary compction by PRR ,all lead s, spreading, grading , cost of labour, machinaries,T&P, cost of transportation,royality, hire charges,taxes(Excluding GST) etc. complete as per specification and direction of the Engineer-in-charge.

Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910 of MORD as per direction of the Engineer in charge.