Mahanadi Coalfields Limited Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Financial
Technical Capacity
... View More
The required prior work experience for the bidder includes: * Three similar completed works each costing not less than 40% of the estimated cost put to tender
* Two similar completed works each costing not less than 50% of the estimated cost put to tender
* One similar completed work costing not less than 80% of the estimated cost put to tender The cost of previous completed works shall be given a simple weightage of 5% per year to bring them to the current price level while evaluating the qualification requirement of the bidder. The date of completion of work should be during the last 7 years ending the last day of the month previous to the one in which bid applications are invited. In case of Joint Venture, the qualifying criteria parameter e.g. experience of the individual partners of the JV will be added together towards fulfilment of qualification criteria related to experience. The participating share of JV partners shall be as below: * Lead Partner shall have at least 50% participating share in JV
* Other partners (s) shall have at least 20% participating share in JV The bidders are required to furnish the following information online: * Description of qualifying experience (similar nature)
* Work order Number /Agreement Number of each experience
* Name & address of Employer/Work Order Issuing authority of each experience
* Percentage (%) share of each experience * Executed Value of work against each experience
* Start date & end date of each qualifying experience (similar nature) A Satisfactory Work Completion Certificate issued by the employer against the experience of similar work is required. In case of a Joint Venture (JV), this certificate is required for individual partners, including the lead partner.
Costs
EMD
₹ 6,14,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Facelifting Work Of 132kv Sub-station Colony - Repair Maintenance And Development Works Including Electrical Works.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MCL_328892_1Tender No
MCL/GM(JA)/SO(C)/e- Tender/24-25/179, Dtd-13/02/25Tender Authority
Mahanadi Coalfields Limited ViewPurchaser Address
-Website
http://https://www.mahanadicoal.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
40
4621
184874
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
100.8
252
25457.04
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Allworks upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
140
7051
987189
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttererses, plinth and
string courses etc.
1500
537
806850
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
350
619
216720
... More
steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth Ievel. Thermo-Mechanically Treated bars of grade Fe-500D or more
11200
97
1096480
... More
12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sandl
1050
289
304132.5
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slu.ry mixed with pigment to match the shade of tiles, including rubbin8 and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement
400
864
345640
... More
Paved Approach Road Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
466.41
216
100767.88
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
233.21
864
201629.04
... More
Cast in Situ cement Concrete M 20 Kerb with Channel (Construction of cement 8.2 concrete kerb with channel with top and bottom width 250 and 300 mm respectively' 250 mm high in M 20 grade PCC on M1O grade foundation 150 mm thick' kerb channel 300 mm wide, 50 mm thick in PCC M2O grade, sloped towards the kerb' kerb sione with channel laid with kerb laying machine, foundation concrete laid manually' all com lete as r clause 409 Using concrete Mixer
1424.5
583
830483.5
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1575
9
15513.75
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block makinS machine with stron8 vlbratory compaction, of approved iize, desiSn & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling thejoints with line sand etc. allcomplete a5 perthe direction of Engineer-in-charge.
2332.05
793
1850714.88
... More
Construction of Turf Paver Block Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
508.6
216
109883.03
... More
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.
2543
1302
3311367.45
... More
CAMPUS DEVELOPMENT Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
32.5
216
7021.63
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
9.75
864
8429.85
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
9.75
4621
45063.04
... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand)
39
6652
259443.6
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes. channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EnBineer-in- cha.ge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
3640
803
2924558
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceedingl.s m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, as per directions of Engineer in lncharge: All kinds of soil
2281.3
72
165622.38
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment)
228.13
253
57865.17
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
273.76
42
11552.67
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
273.76
29
8007.48
... More
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
30
1070
32100
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cast of plant & water) Hedge Plant /Ground cover
5600
1
10920
... More
Providing and fixing of Tuflex Garden fencing Hexagonal net/or equivalent of green colour having contents (Weight grams/sqm. 510 (+/- 8%)) in width of 60 cm. with bamboo of 90 cm. length. The bamboo should bepainted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm.below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. The net and bamboo should bebinded with 2 mm. G.I. Wire at three places properly as per direction of Engineer-in-charge.
30
314
9421.5
... More
Providing & laying Selection no. 1 doob grass turf wath earth 50mm to 50mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge
810
202
164065.5
... More
Supplying and spreading of sand in lawn area, including watering, and dressing complete
318
864
274942.8
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm
45.63
240
10980.86
... More
Fine dressing of the ground
2281.3
2
6729.84
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
442
232
102610.3
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and anufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
442
142
63073.4
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 k&/10 sqm)
442
162
71780.8
... More
Providing and fixing SW-01-,Doubls Swing of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
33350
33350
... More
Providing and fixing SS-02-4 STR SEE SAW of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
24150
24150
... More
Providing and fixing SS-03-MULTI STR SEE SAW of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
20700
20700
... More
Providing and fixing CLT-07-MONKEY CLIMBER of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
33350
33350
... More
Providing and fixing CLT-10-LOOP RUNG of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
26450
26450
... More
Providing and fixing CLT-06-MAZE CLIMBER of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
57500
57500
... More
Providing and fixing MGR-01-FRP-PLATFORM MGR of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
1
40250
40250
... More
Providing and fixing DB-13-WHALE DUST BIN of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
6
11500
69000
... More
Providing and fixing DB-15-FISH DUST BIN of Gl "C" class pipe, PP powder coating,FRP material like Golcoat & Resin are of Satyen brand Matt (Binani make) or equivalent as per approval of EIC.
6
11500
69000
... More
C TYPE FACELIFTING - CIVIL Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
0.58
1989
1153.68
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
232.45
30
7182.7
... More
12 mm cement plaster of mix ::1:6 (1 cement: 6 fine sand)
232.45
217
50546.25
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
542.39
11
6183.25
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
792.85
142
113139.69
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
792.85
162
128758.84
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
158.76
178
28386.29
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
75.42
160
12108.68
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
96
185
17769.6
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable Concentration 20%
24
311
7474.8
... More
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
0.58
7475
4335.56
... More
Centering and shuttering including strutting, propping etc. and removal of form for vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
9.42
1128
10629.06
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
46.22
97
4524.94
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness
37.21
89
3332.16
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
27.31
1480
40432.45
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
14.22
1701
24190.35
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
1.72
477
820.7
... More
Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.
96
446
42816
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
3
1363
4090.35
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
3
6361
19084.2
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
48
526
25293.6
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
54.36
196
10700.77
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
90.6
51
4661.37
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
54.36
73
4019.92
... More
C TYPE FACELIFTING - PLUMBING Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter
36
362
13062.6
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729
6
449
2697.3
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
40
279
11166
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
12
177
2133
... More
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 80 mm diameter C.I. pipe
36
237
8555.4
... More
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 100 mm diameter C.I. pipe
36
248
8931.6
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia Hubless centrifugally cast (spunl iron pipes epoxy coated inside & outside lS:15905
60
1008
60483
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.l./ C.l. Pipes : 100 mm dia pipe
36
132
4777.2
... More
Providing and fixint M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand:4 Sraded stone atgregate 20 mm nominal size), includlng cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
36
280
10087.2
... More
Providing and fixing plain bend of required degree. 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside lS:15905
8
362
2899.6
... More
Providing and fixing single equal plain junction of required degree : 100x100x100 mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per lS:15905
16
554
8865.6
... More
Constructing brick masonry chamber for underground C.l inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 roarse sand) C.l. cover with frame (light duty) 455x610 mm internal dimensions, total weight cover with frame to be not less than 38 kg (weight of 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: lnside dimensions 455x610 mm and 45 cm deep for single pipe line : Wilh fly ash Brick (230x115x75 mm size) bricks of class designation 10
4
5804
23217.8
... More
C TYPE FACELIFTING - WATER RECHARGE PIT Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
75.68
160
12139.07
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
0.24
864
207.5
... More
Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
7.89
4897
38642.85
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5.44
4621
25142.86
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
9.87
252
2492.67
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
2.12
6361
13486.17
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
100
97
9790
... More
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
25.87
217
5625.43
... More
Neat cement punning.
25.87
59
1527.62
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing ofjoints etc. complete : 150 mm dia. R.C.C. pipe
60
628
37689
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 150 mm nominal size dia
50
897
44890
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge
3.16
1479
4676.01
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
3.16
1671
5281.62
... More
Gravel packing in tubewell construction in accordance with lS:4097, including providing gravel fine/ medaum/ coarse, in required grading & sizes a5 per actual requirement, all complete as per direction of Engineer an,charge.
4.24
1786
7575.18
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
3.16
1640
5182.56
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, allcomplete for borewell of 150 mm dia
1
609
609.8
... More
Boring,/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in lS: 2800 (part l), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges oI all equipments. tools, plants & machineries required for the job, all complete as per direction of Engineer in charge, upto 90 metre depth below Ground level. All types of soil. 300 mm dia
50
502
25122.5
... More
C TYPE FACELIFTING - SURFACE DRAIN Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
8.8
216
1901.24
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m .
5.87
173
1019.62
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
3.3
864
2853.18
... More
Half brick masonry with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundations and plinth in : Cement Mortar 1:4 {l cement : 4 coarse sand)
20
626
12537
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4.4
4621
20336.14
... More
12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
44
232
10214.6
... More
Neat cement punning.
44
59
2598.2
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Allworks upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
3.3
7051
23269.46
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
12.66
619
7839.07
... More
steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in positioh and binding all complete upto plinth Ievel. Thermo-Mechanically Treated bars of grade Fe-50OD or more
231
97
22614.9
... More
C TYPE FACELIFTING - PAVED APPROACH ROAD Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
24
216
5185.2
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
12
864
10375.2
... More
Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of cement concrete
kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm
thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb
laying machine, foundation concrete laid manually, all complete as per clause 409) Using concrete Mixer
32
583
18656
... More
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and
including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
120
793
95232
... More
PQC ROAD Excavation in Soil using hydraulic excavator and Tippers With Disposal upto 1000 meter (Excavation for roadwork ln soil With hydraulic excavator includings cutting and loading in tippers, trimming bottom and side Slopes in accordance with requirements of Lines Graded and cross Section and Transpoting to the Embakment Location with all Lift and Lead upto 1000m as per relevent clauses of Section 300 of Specification ). In Ordinary Soil
1500
77
115500
... More
Embankment Construction with Material Obtaitned from Borrow Pits ( Construction Of embakment with approved material having CBR 7, Obtained from borrow Pits with all Lifts and leads, Transporting to site , Spreading , Grading to required Slope and compacting to meet Reqirement of table 300-1, 300-2 and as per relevent clauses of section - 300 )
300
258
77400
... More
Construction ot granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR 30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC with rotavator and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 40l of Specification. GSB with grading material -1
360
2115
761400
... More
Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base
over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per table 600-1, cement content not to be less
than 150 kg/ cum, optimum moisture content to be determined during trial length construction,
concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported
to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601 of specifications complete in all respect.
270
3247
876690
... More
Cement Concrete Pavement ( Construction of un-reinforced, dowel jointed, plain cement concrete pavement (minimum flexural strength - 4.5 Mpa) over a prepared sub base with cement @ 400 kg per cum (minimum), coarse and fine aggregate conforming to IS 383,maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a batching and mixing plant as per approved mix design,transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation
membrane, sealant primer, joint sealant, debonding strip, admixtures as approved,curing
compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per
relevant clauses of section 602 of specifications complete but excluding cost of steel in dowel
bar and tie rods etc.
360
6187
2227320
... More
Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of cement concrete
kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M
20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm
thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb
laying machine, foundation concrete laid manually, all complete as per clause 409) Using concrete Mixer
600
583
349800
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Mild steel and Medium Tensile steel bars
9000
69
623700
... More
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface
with synthetic enamel paint in all shades on new plastered concrete surfaces)
150
135
20250
... More
Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road
Grade-I marking paint concrete surface (cold applied reflective paint) conforming to IS:164 on
bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter,
demarcation at site and traffic control Over l0 cm in width Control.
60
216
12960
... More
ENTRANCE GATE - CIVIL Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
84
216
18148.2
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
56
173
9727.2
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
10.5
317
3335.85
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
9.45
864
8170.47
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: with chlorpyriphos/Lindane E.C. 20% with 1% concentration
77
185
14252.7
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable Concentration 20%
19.25
311
5995.41
... More
Brick work withFly Ash Brick (230x115x75 mm saze) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
4.1
4897
20080.57
... More
Brick work withFly ash Brick (23Ox115x7S mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in in Cement mortar 1:6 (1 cement : 6 Coarse sand)
33.97
6059
205849.71
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
11.55
4621
53382.37
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
31.26
7051
220425.2
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
46.72
252
11799.14
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilever
549.28
505
277798.36
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content
in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
86.04
8151
701385.17
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platfor
265.06
619
164125.15
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
215.51
649
140070.72
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. Sutset plates at the junctions and corners, all necessary fittings complete, includinB applying a priming coat of approved steel primer. UsinB M.S. angels 40x40x6 mm for diagonal braces
3.15
4660
14679.63
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1462.5
145
212940
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
3449.41
97
337697.24
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
12113.57
97
1185918.5
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
158.4
178
28321.92
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
2
192
384.6
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
836.86
217
181975.21
... More
6 mm cement plaster of mix :
1:3 (1 cement : 3 fine sand)
46
196
9055.1
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats.
145.66
105
15345.28
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture
50.62
160
8127.04
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size (Size of Tile 600 x 600 mm )
24.9
1242
30946.96
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and anufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
882.86
142
125984.12
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
737.2
238
176043.36
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.
21
615
12926.55
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
42.16
572
24121.84
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
50.49
658
33240.09
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
6.2
90
563.27
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
31.68
1323
41937.98
... More
COMPOUND WALL Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilever
232.5
505
117586.88
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
390
649
253480.5
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Allworks above plinth level upto floor V level. Concrete of M25 grade with min imu m cement content of 330 kg /cum
58.31
8151
475334.37
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in positioh and binding all complete above plinth Ievel. Thermo-Mechanically treated bars of grade Fe500 or more
5831.25
97
570879.38
... More
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
558
217
121337.1
... More
Brick work with non modular fly ash bricks ( Raise of Boundary Wall )
174.38
6428
1121001.83
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
3255
162
528612
... More
Providing and fixing concertina coil fencing with punched tapeconcertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
775
295
229043.5
... More
Structural steel work in single section, fixed with or without connecting plate. including cutting, hoistin& fixing in position and applying a priming coat of approved steel primer all complete.
732.38
99
73054.91
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
13.95
160
2239.67
... More
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.
36.38
1820
66238.89
... More
RCC DRAIN IN ROAD CROSSING Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
23.76
216
5133.35
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m .
15.84
173
2751.41
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1.98
864
1711.91
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
1.98
4621
9151.26
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
3.64
252
919.18
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the
following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content
in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
18.48
7051
130308.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttererses, plinth and
string courses etc.
36.26
537
19504.25
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
9.71
619
6012.43
... More
steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth Ievel. Thermo-Mechanically Treated bars of grade Fe-500D or more
1663.2
97
162827.28
... More
12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sandl
43.2
289
12512.88
... More
B TYPE FACELIFTING - CIVIL Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1.65
1989
3282.02
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
688.79
30
21283.61
... More
12 mm cement plaster of mix ::1:6 (1 cement: 6 fine sand)
688.79
217
149777.39
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1607.17
11
18321.74
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2266.58
142
323440.97
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2266.58
162
368092.59
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
355.32
178
63531.22
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
186.17
160
29889.59
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
348
185
64414.8
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable Concentration 20%
87
311
27096.15
... More
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
1.65
7475
12333.91
... More
Centering and shuttering including strutting, propping etc. and removal of form for vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
27.01
1128
30476.73
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
131.65
97
12888.54
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness
84.85
89
7598.32
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
70.65
1480
104597.33
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
30.72
1701
52259.33
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
5.06
477
2414.38
... More
Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.
348
446
155208
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
6
1363
8180.7
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6
6361
38168.4
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
174
526
91689.3
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
73.14
196
14397.61
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
121.9
51
6271.76
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
73.14
73
5408.7
... More
B TYPE FACELIFTING - PLUMBING Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter
120
362
43542
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729
12
449
5394.6
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
60
279
16749
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
40
177
7110
... More
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 80 mm diameter C.I. Pipe
120
237
28518
... More
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 100 mm diameter C.I. pipe
120
248
29772
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia Hubless centrifugally cast (spunl iron pipes epoxy coated inside & outside lS:15905
280
1008
282254
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.l./ C.l. Pipes : 100 mm dia pipe
120
132
15924
... More
Providing and fixint M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand:4 graded stone atgregate 20 mm nominal size), includlng cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
120
280
33624
... More
Providing and fixing plain bend of required degree. 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside
lS:15905
16
362
5799.2
... More
Providing and fixing single equal plain junction of required degree : 100x100x100 mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
lS:15905
32
554
17731.2
... More
Constructing brick masonry chamber for underground C.l inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 roarse sand) C.l. cover with frame (light duty) 455x610 mm internal dimensions, total weight cover with frame to be not less than 38 kg (weight of 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: lnside dimensions 455x610 mm and 45 cm deep for single pipe line : Wilh fly ash Brick (230x115x75 mm size) bricks of class designation 10
8
5804
46435.6
... More
B TYPE FACELIFTING - WATER RECHARGE PIT Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
151.37
160
24279.75
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
0.48
864
415.01
... More
Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
15.78
4897
77285.71
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
10.89
4621
50331.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass
concrete
19.74
252
4985.34
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
4.23
6361
26908.72
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
200
97
19580
... More
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
51.74
217
11250.86
... More
Neat cement punning.
51.74
59
3055.25
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing ofjoints etc. complete : 150 mm dia. R.C.C. pipe
120
628
75378
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 150 mm nominal size dia
100
897
89780
... More
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge
6.32
1479
9352.02
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
6.32
1671
10563.25
... More
Gravel packing in tubewell construction in accordance with lS:4097, including providing gravel fine/ medaum/ coarse, in required grading & sizes a5 per actual requirement, all complete as per direction of Engineer an,charge.
8.48
1786
15150.37
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
6.32
1640
10365.12
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, allcomplete for borewell of 150 mm dia
2
609
1219.6
... More
Boring,/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in lS: 2800 (part l), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges oI all equipments. tools, plants & machineries required for the job, all complete as per direction of Engineer in charge, upto 90 metre depth below Ground level. All types of soil. 300 mm dia
100
502
50245
... More
B TYPE FACELIFTING - SURFACE DRAIN Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
319
216
68919.95
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m .
212.67
173
36940.78
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
119.63
864
103432.1
... More
Half brick masonry with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundations and plinth in : Cement Mortar 1:4 {l cement : 4 coarse sand)
36.25
626
22723.31
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
159.5
4621
737185.08
... More
12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
1595
232
370279.25
... More
Neat cement punning.
1595
59
94184.75
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Allworks upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
119.63
7051
843553
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
458.93
619
284169.46
... More
steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in positioh and binding all complete upto plinth Ievel. Thermo-Mechanically Treated bars of grade Fe-50OD or more
8373.75
97
819790.13
... More
B TYPE FACELIFTING - PAVED APPROACH ROAD Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
99.2
216
21432.16
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
49.6
864
42884.16
... More
Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409) Using concrete Mixer
92
583
53636
... More
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
496
793
393625.6
... More
A TYPE FACELIFTING - CIVIL Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1.53
1989
3043.32
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
782.43
30
24177.09
... More
12 mm cement plaster of mix ::1:6 (1 cement: 6 fine sand)
782.43
217
170139.4
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1825.66
11
20812.52
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2751.23
142
392600.52
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
2751.23
162
446799.75
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
842.4
178
150621.12
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
248.16
160
39842.09
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
264
185
48866.4
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable Concentration 20%
66
311
20555.7
... More
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
1.53
7475
11436.9
... More
Centering and shuttering including strutting, propping etc. and removal of form for vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
25.69
1128
28987.31
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more
122.32
97
11975.13
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25 mm average thickness
127.28
89
11397.92
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
105.98
1480
156903.39
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
46.08
1701
78388.99
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
5.3
477
2528.9
... More
Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.
264
446
117744
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
6
1363
8180.7
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6
6361
38168.4
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
132
526
69557.4
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
135.91
196
26753.88
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
113.26
51
5827.23
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
135.91
73
10050.54
... More
A TYPE FACELIFTING - PLUMBING Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter
160
362
58056
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729
16
449
7192.8
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
80
279
22332
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
54
177
9598.5
... More
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 80 mm diameter C.I. pipe
160
237
38024
... More
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks, including stacking of pipes at site lead up to 50 metre: 100 mm diameter C.I. pipe
160
248
39696
... More
Providing and fixing soil, waste and vent pipes : 100 mm dia Hubless centrifugally cast (spunl iron pipes epoxy coated inside & outside lS:15905
224
1008
225803.2
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.l./ C.l. Pipes : 100 mm dia pipe
96
132
12739.2
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand:4 graded stone atgregate 20 mm nominal size), includlng cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
96
280
26899.2
... More
Providing and fixing plain bend of required degree. 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside lS:15905
16
362
5799.2
... More
Providing and fixing single equal plain junction of required degree : 100x100x100 mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per lS:15905
32
554
17731.2
... More
Constructing brick masonry chamber for underground C.l inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 roarse sand) C.l. cover with frame (light duty) 455x610 mm internal dimensions, total weight cover with frame to be not less than 38 kg (weight of 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: lnside dimensions 455x610 mm and 45 cm deep for single pipe line : Wilh fly ash Brick (230x115x75 mm size) bricks of class designation 10
8
5804
46435.6
... More
A TYPE FACELIFTING - WATER RECHARGE PIT Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil
151.37
160
24279.75
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
0.18
864
155.63
... More
Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
15.78
4897
77285.71
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
10.89
4621
50331.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
19.74
252
4985.34
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
4.23
6361
26908.72
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
200
97
19580
... More
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
51.74
217
11250.86
... More
Neat cement punning.
51.74
59
3055.25
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing ofjoints etc. complete : 150 mm dia. R.C.C. pipe
120
628
75378
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge 150 mm nominal size dia
100
897
89780
... More
Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge
6.32
1479
9352.02
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge
6.32
1671
10563.25
... More
Gravel packing in tubewell construction in accordance with lS:4097, including providing gravel fine/ medaum/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer an,charge.
8.48
1786
15150.37
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge
6.32
1640
10365.12
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, allcomplete for borewell of 150 mm dia
2
609
1219.6
... More
Boring,/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in lS: 2800 (part l), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges oI all equipments. tools, plants & machineries required for the job, all complete as per direction of Engineer in charge, upto 90 metre depth below Ground level. All types of soil. 300 mm dia
100
502
50245
... More
A TYPE FACELIFTING - SURFACE DRAIN Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
26.4
216
5703.72
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m .
17.6
173
3057.12
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
9.9
864
8559.54
... More
Half brick masonry with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundations and plinth in : Cement Mortar 1:4 {l cement : 4 coarse sand)
60
626
37611
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
13.2
4621
61008.42
... More
12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
132
232
30643.8
... More
Neat cement punning.
132
59
7794.6
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. Allworks upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
9.9
7051
69808.36
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
37.98
619
23517.22
... More
steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in positioh and binding all complete upto plinth Ievel. Thermo-Mechanically Treated bars of grade Fe-50OD or more
693
97
67844.7
... More
A TYPE FACELIFTING - PAVED APPROACH ROAD Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
40.8
216
8814.84
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
20.4
864
17637.84
... More
Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of cement concrete
kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm
thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb
laying machine, foundation concrete laid manually, all complete as per clause 409) Using concrete Mixer
50
583
29150
... More
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
204
793
161894.4
... More
ELECTRICAL - POINT WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
Group – C
6
1365
8190
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular plate etc required.
2
413
826
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
512
512
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required
Telephone socket outlet Each
1
121
121
... More
S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (75 mm x 75 mm)
1
244
244
... More
ELECTRICAL - DISTRIBUTION BOARDS Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required.( but without MCB/RCCB/ Isolator).
8 way , Double door
1
2507
2507
... More
S/F 'C' series 5A to 32 A MCB: Supplying and fixing 240 volts, 'C' curve, 10kA miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Single Pole
4
247
988
... More
S/F 'C' series 5A to 32 A MCB: Supplying and fixing 240 volts, 'C' curve, 10kA miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Double Pole
1
663
663
... More
ELECTRICAL - SUB MAIN AND CIRCUIT WIRING Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2 X 6 sq. mm + 1X 6 sq. mm earth wire
50
392
19600
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired. 3 X 2.5 sq. mm (For circuit wiring)
40
126
5040
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired. Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as reqired. 3 X 4.0 sq. mm (For power point wiring)
20
191
3820
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
48
116
5568
... More
ELECTRICAL - LIGHT FITTINGS AND FANS S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
7
69
483
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
6
149
894
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required
4
98
392
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC , earthing etc. complete as required
2
2420
4840
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required Upto 450 mm sweep
1
334
334
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes
1
150
150
... More
22W LED BATTEN PLUS LUMILINE: Supply of 20W surface and wall mounted LED with aluminium housing & integrated electronic driver.
4
673
2692
... More
LED Bulb 10W : Supplying and fixing of LED 10W bulb and accessories as required.
4
116
464
... More
Supply of sizes 300 mm, 230 v A.C. heavay duity exhaust fan complete with motor,blades,frame, bracket, lover/shutter etc. as required of Greatwhite or apporoved equivalent.
1
1365
1365
... More
ELECTRICAL - EARTHING Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (for street light poles)
11
6471
71181
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
110
551
60610
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
760
61
46360
... More
ELECTRICAL - MV CABLE Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ metal pipe as required.
Upto 35 sq. mm
1100
25
27500
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm (32mm)
1
318
318
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (38mm)
2
268
536
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 6 sq. mm (19mm)
8
187
1496
... More
Supplying and making Outdoor termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm
1
1602
1602
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
990
127
125730
... More
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. 4CX35 sq. mm
200
401
80200
... More
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. 4CX16 sqmm
100
257
25700
... More
MV Cable:- Supply of ISI marked aluminium cable conductor XLPE PVC insulated cable as per IS:7098 armoured, served, sheathed, 1100V grade with Termination and Laying of cable. 2CX6 sq. mm
800
141
112800
... More
STREET LIGHT JB TO LUMINARIES Supply & drawing of 2CX1.5 Sq. Of FRLS PVC insulated Cu.single core cable in the existing surface/ recessed steel/ PVC conduit as required.
189
62
11718
... More
Providing and fixing MV. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required
2
229
458
... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) of size 60 cm X 60 cm at the bottom and 50cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
10
498
4980
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
10
411
4110
... More
Supplying of 7 Mtr hight octagonal hot Dip galvanized pole (BOP-9031) With top dia 70mm, bottom dia 130 mm and made 3 mm thiek sheet , base plate dimensions 200x200x16mm (LXBXT) with door and locking arrangement sheet,neutral link, suitable 6A MCB , 4 way 63 Amp terminal block suitable to receive PVC armoured cable fixed on suitable size Baketillte sheet base complete or any other electrical accessory including suitable sizes of foundation bolt all complete as required . (without Arm)
21
13624
286104
... More
Supplying of 7 Mtr hight octagonal hot Dip galvanized pole (BOP-9031) With top dia 70mm, bottom dia 130 mm and made 3 mm thiek sheet , base plate dimensions 200x200x16mm (LXBXT) with door and locking arrangement sheet,neutral link, suitable 6A MCB , 4 way 63 Amp terminal block suitable to receive PVC armoured cable fixed on suitable size Baketillte sheet base complete or any other electrical accessory including suitable sizes of foundation bolt all complete as required .
Single arm, 1500 mm
20
2122
42440
... More
Supplying of 7 Mtr hight octagonal hot Dip galvanized pole (BOP-9031) With top dia 70mm, bottom dia 130 mm and made 3 mm thiek sheet , base plate dimensions 200x200x16mm (LXBXT) with door and locking arrangement sheet,neutral link, suitable 6A MCB , 4 way 63 Amp terminal block suitable to receive PVC armoured cable fixed on suitable size Baketillte sheet base complete or any other electrical accessory including suitable sizes of foundation bolt all complete as required .
Double arm, 1500 mm
1
3537
3537
... More
Erection of metalic pole of following length in cement concrete1:3:6( 1 cement: 3 coarse: 6 grade stone aggregate 40mm nominal size) foundation including excavation & refilling etc. as required
6.5 m to 8.0 m
21
4848
101808
... More
Supplying and fixing of 70 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07.Complete with all fixing accessories as required
22
6289
138358
... More
120W LED FLOOD LIGHT: Supply , installation, testing and commissioning of 120W, LED, flood light. High pressure die cast aluminium material with integrated optics, asymmetric wide beam LED flood light. Protection :IP66
6
10538
63228
... More
Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaries and its control gear box, lightning arrestor, arrangement for fixing aviation light, night glow reflector on pole at suitable height, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with double check nuts & necessary accessories complete.
1
231495
231495
... More
Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, 25 A TP contactor for automatic switching of luminaries, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.
1
24008
24008
... More
LED Post top Opel of 40W : Supply and fitting of new generation , LED post top energy saving enviromental friendly, spun aluminium housing with decorative polycarbonate diffuser IP65 protection.
4
7244
28976
... More
Bollard :- Providing, fitting, fixing and testing of Bollard light decorative luminaire light fixture of 800mm in length (IP-66) 10W LED Lamp with foundation, commissioning, testing with all other accessories as per drawing provided at the time of work execution or as per the direction of E/I)
25
5445
136125
... More
ELECTRICAL - FEEDER PILLAR Design, manufacturer, supply, testing and commissioning of Required with 2.5mm thick sheet metal enclosure, powder coated, weather proof, double door type feeder pillar with godown lock and padlock complete with interconnection with copper wires, LED indicating lights, providing holes for the glands. The base frame shall have angle iron of 50mm x 50mm x6mm of required size with 600mm long legs of MS angle and coverage of underground cable under feeder pillar with 2.5 mm thick sheet, 450mm in width all round the base frame including grouting the feeder pillar in 1:4:8 cement concrete complete as required. Feeder Pillar shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required. Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated )
1
57865
57865
... More
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
1
413236
413236.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%