Indo Tibetan Border Police Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 8,79,729Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of 10 Bedded Hospital At 41st Bn Khurdha
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_ITBP_836894_1Tender No
ITBP/SHQBBSR/ENG/41BN/24-25Tender Authority
Indo Tibetan Border Police ViewPurchaser Address
-Website
http://https://www.itbpolice.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Felling/Uprooting for shifting of trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth
27
439
11859.75
Supplying chemical emulsion in sealed containers including delivery as specified. :- Chlorpyriphos emulsifiable concentrate of 20% ALONG THE WALL @2.25*228.64(BUILDING PARAMETER)=2.25 X 228.64= 514.45
514.44
200
103351
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:- With Chlorpyriphos E.C. 20% with 1% concentration.
228.64
44
10220.21
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
81.88
6326
518000.38
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
69.77
6050
422170.19
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers,
abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,
sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
8.95
9375
83889.29
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
122.52
681
83515.76
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost ofcentering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Centering and shuttering including strutting, propping etc. and removal of form for :-
9.01
10719
96608.76
Centering and shuttering including strutting, propping etc and removal of form for:-
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
355.32
307
109419.59
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
32.92
669
22041.59
Suspended floors, roofs, landings, balconies and access platform
1050.09
766
804944.5
Shelves (Cast in situ)
102.27
766
78391.62
Lintels, beams, plinth beams, girders, bressumers and cantilevers
1410.42
608
858025.97
Columns, Pillars, Piers, Abutments, Posts and Struts
492.54
804
396124.49
Stairs, (excluding landings) except spiral-staircases
78.75
657
51797.81
Edges of slabs and breaks in floors and walls Under 20 cm wide(SLAB EDGES)
313.81
181
57081.13
Weather shade, Chajjas, corbels etc., including edges
81.65
814
66536.59
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
175.08
319
55893.97
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete below plinth level and above plinth level upto V level .Thermo-Mechanically Treated bars of grade Fe-500D or more.
91167.51
89
8173167
Providing and filling in position bitumen mix filler of proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints.
0.08
22400
1747.24
Providing and fixing sheet covering over expansion joints with iron screws as per design:- Aluminium fluted strips 3.15 mm thick- 150mm wide
9.7
515
5003.26
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
154.03
64
9965.87
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum.
338.68
7996
2708219.67
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement: All works above plinth level upto floor V level :- Concrete of M25 grade with minimum cement content of 330 kg /cum.
364.89
10080
3678147.95
Add for using extra cement in the items of design mix over and above the specified cement content therein. (@ 0.33 QUINTAL PER CUM OF RCC)
232.18
688
159844.32
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
6.02
6882
41429.64
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure under plinth level, above plinth level and up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand)
259.03
7873
2039421.76
Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)
616.63
969
597910.43
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
616.63
86
53307.23
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab all colour and texture except black, Cherry/Ruby red. Area of slab over 0.50 sqm
32
3301
105636.5
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
38.86
418
16274.42
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
6.36
475
3024.02
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
14
808
11314.1
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete: Wedge expansion type Fastener with threaded dia 6 mm
664
30
20418
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1179.19
1063
1254004.29
Providing and fixing of hospital curtain track made of powder coated aluminium minimum 40mm depth along with handing rod, end cleats, screws etc complete in all respects to the satisfaction of Engineer-in-charge
60.76
509
30973.51
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
90.3
3086
278682.55
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
90.3
401
36247.42
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm
192
104
20006.4
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
48
739
35510.4
Providing and fixing aluminium tower bolts, ISI marked, powder coated to required colour or shade, with necessary screws etc. complete :
-
-
-
200x10 mm (Additional Rs 10/unit added for powder coating)
130
90
11804
:150x10 mm (Additional Rs 10/unit added for powder coating)
33
75
2493.15
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
58
856
49684.54
Providing and fixing aluminium handles, ISI marked, powder coated to required colour or shade, with necessary screws etc. complete :125 mm (Additional Rs 10/unit added for powder coating)
173
60
10388.65
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) Btransparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
93
62
5789.25
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge
163.49
481
78777.66
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm,painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. Decorative finish (both side wood grained finish)
56.39
3194
180116.24
Providing and fixing fly proof stainless steel grade 304 wire gauge, to upvc windows and clerestory windows , Alumimium doors using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
124.35
981
121998.35
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
91.94
10347
951256.04
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
27.54
7249
199662.25
Providing and fixing factory made uPVC white colour sliding glazed window comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash sfor fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
27.54
10030
276234.46
Providing and fixing of Lead lined single leaf door (size 1100 x 2100 mm ) suitable for X-ray/other rooms with radiation consisting of following specifications. The rate should be inclusive of supply, installation, carriage, wastage, fittings, profits, taxes etc complete in all respects.:- i) Providing and fixing of hollow metal doors at all levels conforming to IS 277. The doors frame shall be double rebate profile of size 140x55mm (minimum) made out of 2mm thick powder coated galvanized steel sheet. The frames shall be butted and field assembled with bolts. The inside face of the frame trim to rebate height should be protected with minimum 1.6mm thick lead lining. Rubber door silences should be provided on the strike jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished masonary wall opening.ii) Door leaf shall be 48mm thick fully flush double skin door made out of 1.2mm thick polyester 50 micron powder coated galvanized steel sheet. The internal construction of the door should be rigid with lead line of 1.6mm thick all across the inside of the exposed surface. In addition the door should have a honeycomb core with neccesary reinforcement both on tope and botton. All doors should be factory prepared and having all accessories such as 4" 3mm thick SS hinges-4 nos, mortice lock-2 nos, suroprofile cylinder in SS -2 nos, euro profile 5pin half cylinder 42mm key x blank, NP finish-1 nos, euro profile 5pin half cylinder 42mm TT x blank, NP finish-1 nos, pull handle pair D type 25mm dia overall length 300mm in SS , SS push plate 0.8 x 150 x 400 mm with adhesive, surface door closer EN 3-5 with standard arm in silver finish, radiation protection concealed auto door bottom seal - 1nos. All Stainless steel accesories shall conform to SS 304 grade. The edges should be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active & inactive leaf.
2
52262
104525.96
Providing and fixing of Lead lined double leaf door (size 2000 x 2100 mm) suitable for X-ray/other rooms with radiation consisting of following specifications. The rate should be inclusive of supply, installation, carriage, wastage, fittings, profits, taxes etc complete in all respects.:- i) Providing and fixing of hollow metal doors at all levels conforming to IS 277. The doors frame shall be double rebate profile of size 140x55mm (minimum) made out of 2mm thick powder coated galvanized steel sheet. The frames shall be butted and field assembled with bolts. The inside face of the frame trim to rebate height should be protected with minimum 1.6mm thick lead lining. Rubber door silences should be provided on the strike jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished masonary wall opening.ii) Door leaf shall be 48mm thick fully flush double skin door made out of 1.2mm thick polyester 50 micron powder coated galvanized steel sheet. The internal construction of the door should be rigid with lead line of 1.6mm thick all across the inside of the exposed surface. In addition the door should have a honeycomb core with neccesary reinforcement both on tope and botton. All doors should be factory prepared and having all accessories such as 4" 3mm thick SS hinges-8 nos, mortice lock-2 nos, europrofile cylinder in SS -1 nos, euro profile 5pin half cylinder 42mm key x blank NP finish-1 nos, euro profile 5pin half cylinder 42mm TT x blank, NP finish-1 nos, 2 nos pull handle pair D type 25mm dia overall length 300mm in SS , 2nos SS push plate 0.8 x 150 x 400 mm with adhesive, surface door closer EN 3-5 with standard arm in silver finish, concealed flush bolt - 300mm long -1 nos, radiation protection concealed auto door bottom seal - 2nos 1000mm long each. All Stainless steel accesories shall conform to SS 304 grade. The edges should be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active & inactive leaf. ( MANDATORY IN XRAY )
1
95023
95023.61
Providing and fixing of hermeatically sealed double leaf door (size 2000 x 2100 mm swing type) suitable for Clean rooms/Operation Theatre consisting of following specifications. The rate should be inclusive of supply, installation, carriage, wastage, fittings, profits, taxes etc complete in all respects.:- i) Providing and fixing of hollow metal doors at all levels conforming to IS 277. The doors shall be with vision glass of size 200 x 300mm in each leaf as part of complete assembly. The doors frame shall be single rebate profile of size 125x60 mm (minimum) made out of 1.2mm thick powder coated galvanized steel sheet. The frames shall be mitered and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished masonary wall opening. Frames shall be filled with puff and for panels zero soffit frames to be provided.ii) Door leaf shall be 46mm thick fully flush double skin door with vision panel made out of 0.8 mm thick polyester 50 micron powder coated galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving hardware. In addition the door should have a resin bonded honeycomb core with neccesary reinforcement both on top and bottom. The edges should be interlocked with a bending radius of 1.4 mm. Vision lite should be with special double glass unit provided as per manufacturer recommendation with a clip-on arrangement, glass should be minimum 5mm clear toughened glass on both sides and should be flushed in line with the shutter . All doors should be factory prepared and having all accessories such as floor spring with SS cover plate , mortice lock-2 nos, europrofile cylinder in SS -1 nos, euro profile 5pin half cylinder 42mm key x blank NP finish-1 nos, euro profile 5pin half cylinder 42mm TT x blank, NP finish-1 nos, 2 nos pull handle pair D type 25mm dia overall length 300mm in SS , 2nos SS push plate 0.8 x 150 x 400 mm with adhesive, surface door closer EN 3-5 with standard arm in silver finish, concealed flush bolt - 300mm long -1 nos, radiation protection concealed auto door bottom seal - 2nos 1000mm long each. All Stainless steel accesories shall conform to SS 304 grade. The edges should be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active & inactive leaf. (MANDATORY FOR OT ROOM )
1
71415
71415.26
Providing and fixing of single leaf door (size 750 mm x 2100 mm hinged) suitable for changing rooms consisting of following specifications. The rate should be inclusive of supply, installation, carriage, wastage, fittings, profits, taxes etc complete in all respects.:- i) Providing and fixing of hollow metal doors at all levels conforming to IS 277. The doors frame shall be single rebate profile of size 125x55 mm (minimum) made out of 1.6mm thick powder coated galvanized steel sheet. The frames shall be mitered and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished masonary wall opening. Frames shall be filled with puff and for panels zero soffit frames to be provided.ii) Door leaf shall be 46mm thick fully flush double skin door with vision panel made out of 1.2 mm thick polyester 50 micron powder coated galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving hardware. In addition the door should have a resin bonded honeycomb core with neccesary reinforcement both on top and bottom. All doors should be factory prepared and having all accessories such as 03 nos 4" 3mm thick SS hinges ,dead lock-1 nos, 2 nos pull handle pair D type 25mm dia overall length 300mm in SS , surface door closer EN 3-5 with standard arm in silver finish. All Stainless steel accesories shall conform to SS 304 grade. For pair of doors integrated astragals has to be provided on the meeting stile for both active & inactive leaf.
1
16901
16901.43
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces (mumty door)
2.52
4781
12048.5
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness,
including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile E.Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
233.45
500
116734.67
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (RAILING)
507.64
612
310805.04
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.
-
-
-
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) - Acid and alkali resistant tile
39.2
1515
59408.67
In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) :-Acid and alkali resistant tile
3.83
1637
6267.48
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed
with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble
27.04
2100
56795.87
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
337.15
1706
575381.9
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
16.41
2038
33446.49
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
99.65
935
93233.48
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
418.09
1416
592282.95
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
37.21
1466
54574.33
Providing and laying of 2mm thick static conductive, flexible homogeneous vinyl flooring (Make:- Electra Plus in Responsive or equivalent in Marvelvinyl/LG/Gerfloor ) for clean rooms, operation theatres in rolls with electric resistance conforming to EN 1081, having carbon conductive backing , anti-fungal, anit-bacterial, high resistance to static, rolling loads , jointing with seamless vinyl welding, low VOC complete in all respects along with 3mm self levelling compund, installation with suitable vinyl welding, adhesive, making jointless coving up to 150mm on walls, including the cost towards copper strip (1mm thick) by making grids of maximum size 1200x1200mm underneath flooring complete in all respects to the satisfaction of Engineer-in-charge. The cost includes carriage, wastage, labour charges, profits, taxes etc.
36.21
2770
100311.84
Providing and laying of 2mm thick phthalene free, flexible homogeneous, non-directional vinyl flooring (Make:- Spica RQ in Responsive or Marvelvinyl/LG/Gerfloor )for hospital rooms, in rolls having anti-fungal, anit-bacterial properties , high resistance to static, rolling loads , jointing with seamless vinyl welding, low VOC complete in all respects along with 3mm self levelling compund, installation with suitable vinyl welding, adhesive, making jointless coving up to 150mm on walls, complete in all respects to the satisfaction of Engineer-in-charge. The cost includes carriage, wastage, labour charges, profits, taxes etc.
30.87
2234
68976.62
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as perstandard design : In 75x75 mm deep chase.
461.28
260
120024.54
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
2072.51
294
611078.1
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
1849.6
442
818910.4
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
1133.14
253
286740.32
Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete.
1133.14
214
242831.26
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work
2912.9
92
270171.38
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer
2912.9
64
187736.34
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) ( EXTERIOR PLASTER WORK - AREA FOR TEXTURED PAINT)
1782.37
162
289366.96
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
67.24
245
16472.58
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3922.11
123
485752.7
Finishing walls with Hygienic Anti Fungal, Anti Bacterial water based, washable water based polyurethane coating paint for highly sterile environments, and having properties such as excellent adhesion to surface,easy to apply,free from fire hazards ,Solvent free ,High bond strength ,Eco-friendly, Thixotrophic for application on vertical surfaces in (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, etc. complete.On walls of Xray area
251.7
387
97623.4
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture priming coat, preparation of surface, etc. complete.
5.04
198
999.94
French spirit polishing : Two or more coats on new works including a coat of wood filler
180
368
66294
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
582.37
180
105118.51
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated nd grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
29.35
529
15548.57
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
45.76
951
43514.34
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
2.2
8613
18959.28
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
116.48
2803
326555.13
Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineerin- charge.
58.24
4130
240552.49
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required olour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern.
536.62
1011
542628.12
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
291.75
474
138493.73
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
178.98
573
102625.99
Pre-laminated particle board with decorative lamination on both sides Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.
4.8
951
4565.04
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
162.88
1325
215899.49
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 . Upto 5 mm depth and 5 mm width ( All exterior window parametre)
348.9
130
45426.78
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of c (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
920.64
1522
1402087.17
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
229
1213
277777
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
2
1290
2580
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
12
707
8484
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
630
265
166950
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
750
208
156000
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
250
356
89000
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
100
406
40600
4X6 sq.mm + 2X6 sq.mm earth wire
30
529
15870
4X10sq.mm + 2X 6 sq.mm earth wire
125
670
83750
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
125
946
118250
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ in heavy duty PVC ISI Mark conduit as required.
150
33
4950
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
300
90
27000
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
31
119
3689
TV antenna socket outlet
5
119
595
RJ-45 Internet socket for Cat 6
22
510
11220
Supplying and fixing suitable size/module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 Nos. 3 pin 5/6 Amp modular socket outlet and 1 No. 16 Amp modular switch, connection, painting etc. as required (For computer power applications). ( For Computer point)
22
713
15686
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
77
401
30877
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
37
495
18315
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box including connection etc as required.
18
65
1170
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
200
49
9800
Providing and fixing following rating and breaking capacity and 4 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required (D.N series).
-
-
-
100 Amp, 30KA, FPMCCB
7
7377
51639
400 A,50KA,FPMCCB
1
26182
26182
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 8 way , Double door
4
1760
7040
Supplying and fixing following way, horizontal type three phase and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6way (4 + 18), Double door
4
3693
14772
8 way (4 + 24), Double door
4
4601
18404
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
Single pole
190
199
37810
Double pole
4
556
2224
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps 4P
9
832
7488
63 amps 4P
10
839
8390
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A
1
1927
1927
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
4
2626
10504
63 A
4
2777
11108
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
5
226
1130
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (For X-Ray, CT / MRI , Ultrasound & AC Unit )
8
5308
42464
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. ( For Main Panel + UPS)
3
11794
35382
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
40
1224
48960
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
50
188
9400
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
10
1009
10090
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
40
128
5120
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
50
37
1850
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Upto 35 sq. mm
230
31
7130
Above 35 sq. mm and upto 95 sq. MM
35
47
1645
Above 95 sq. mm and upto 185 sq. MM
380
64
24320
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 10 sq. mm (19mm)
8
198
1584
3½ X 35 sq. mm (32mm)
4
300
1200
3½ X 120 sq. mm (45mm)
2
489
978
3½ X 150 sq. mm (50mm)
8
555
4440
4 X 16 sq. mm (28mm)
10
250
2500
4 X 25 sq. mm (28mm)
16
250
4000
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole/wall including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
4
1012
4048
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
155
209
32395
90 mm dia (OD-90 mm & ID-76 mm nominal)
380
249
94620
Supply and Erection of Rubber Mat of size 2m x 1m x 16 mm thick suitable for 11 KV (ISI mark) complete in all respect.
2
1671
3342
Supply and fixing in position approved shock treatment chart written in English, Hindi nd local language. These charts shall be framed in wooden frame and covered with clear glass.
1
712
712
Supply and fixing in position the best quality danger notice boards of approved shape and size as required by the local pecificat Inspecting Authority pecifi in English, Hindi and local language. (For 440 Volt & 11000 Volts).
2
163
326
Supply, installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Panel fabricated out of 14 SWG thick CRCA sheet steel suitable for operation on 415 Volts, 50Hz, 3 Phase 4 wire AC supply . The panel shalll be indoor free standing, floor mounting, dust and vermin proof type, adeqate size cable alley with front operated rotary handles for MCCB's complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing, labelling, electrically and Mechanically interlocking , as per specification and drawings, suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required. A separate earth copper bus bar of size 25 mm x 5 mm to be provided throughout the length of the panel. The Panel should be extendable type. (Make of panel, Tricolite, International Switchgear, Embit ,Kalyani switchgear). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008. Note:- The cost of MCCBs, etc. are not included in the panel's cost and shall be paid under separate head. All acccessories included in the panel cost such as MCBs, ACB , rotary handles, Spreader link and its accessories & metering etc. The panel should be got inspected / tested in the factory premises from the Engineer-in-charge / consultant before brought at site.
-
-
-
MAIN L.T.PANEL
-
-
-
INCOMER FEEDER
-
-
-
MCCB 400A. FP50KA. = 1NO.
-
-
-
METERING SET
-
-
-
Voltmeter with VSS = 1NO.
-
-
-
Ammeter with ASS = 1NO.
-
-
-
RYB Indication Lamp LED = 3NO.
-
-
-
400/5Amp. 15 VA CL-1 Current = 3NO.
-
-
-
06Amp. Control SP MCB. = 3NO.
-
-
-
CT Short Link = 3NO.
-
-
-
OUTGOING FEEDER
-
-
-
MCCB FP 100A. 25KA. For X-RAY Room = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCCB FP 100A. 25KA. For ULTRASOUND = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCCB FP 100A. 25KA. For Spare = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCCB FP 100A. 25KA. For MRI = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCCB FP 100A. 25KA. For AC UNIT FOR OT = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCB 63A. TPN 25KA. TM Based For PDB-1,2,3,4 = 4NO.
-
-
-
Spreader Links = 4NO.
-
-
-
Extended Rotary Handle = 4NO.
-
-
-
MCB 40A. TPN 25KA. TM Based For LDB-1,2,3,4 = 4NO.
-
-
-
Spreader Links = 4NO.
-
-
-
Extended Rotary Handle = 4NO.
-
-
-
MCB 40A. TPN 25KA. TM Based For WATER LIFTING PUMP = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCB 63A. TPN 25KA. TM Based For FEEDR PILLAR COMPOUND LIGHTING = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
MCCB TPN 63A. 25KA. For Spare = 1NO.
-
-
-
Spreader Links = 1NO.
-
-
-
Extended Rotary Handle = 1NO.
-
-
-
Dummy = 2NO.
-
-
-
ENCLOSURE & ACCESSORIES Fabrication in 1.6/2mm.CRCA Sheet Powder Coating in Siemens Gray Shade, Cable Entry will be Top & Bottom Suitable for Cable ,Lock, Rubber Gasket, hardware etc. BUS BAR & HARDWARE 1250A. 4P Aluminium Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat Shrink Bus Bar sleave Nut-Bolt,Washer ,Hardware etc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers, Hardware & Labour etc.
1
151093
151093
Supply, installation, testing and commissioning of Inverter cum UPS of capacity 3KVA including batteries 2x150AH complete in all respect. The inverter shall be having short circuit , overload protection, smart communication with monitoring software , over temperature protection, EMI/RFI Noise filter, LCD/LED display , output frequency at 50 Hz or can be synchonized with input frequency and also having static bypass enable, disable & outlets, protection from DC fan failure & in-built over voltage cut-off device complete in all respects. Make:- Model no 1PH:1PH 72V-IB Max+ in Microtek/equivalent in Okaya, Luminous.
1
62090
62090
Supply, testing and commissioning of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid as per requirement at the site of work including all petty material required to complete the job. Upto entire satisfaction of the Eingeer-in-charge/ Consultant.
-
-
-
Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells/SVARN) 10sq.mm 2Core
50
242
12100
Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells/SVARN) 16sq.mm 4Core
60
261
15660
Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells/SVARN) 25sq.mm 4Core
120
352
42240
Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells/SVARN) 35sq.mm 3.5Core
35
407
14245
Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells/SVARN) 120sq.mm 3.5Core
40
910
36400
Supply Testing and Commisioning of aluminium conductor XLPE insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :- (Make Polycab / KEI / Havells/SVARN) 150sq.mm 3.5Core
340
1313
446420
Supply, installation, testing and commissioning of Led fixture 5watt with Surface Mounted Polycarbonate diffuser .The Input voltage range shall be 150V to 270V .The fixture should be BIS Approved. (make Philips/ Wipro/ havells/bajaj)
18
296
5328
Supply, installation, testing and commissioning of IP20 Led fixture 10 W+/- 1W with Surface Mounted 2 Feet with Polycarbonate diffuser with Extruded aluminium housing minimum system lumen output 2000 lumens and system efficacy of 100 Lm/W with P.F.0.95 with THD20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 6500 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V .The fixture should be BIS Approved. Including cost of all petty materials required to complete the job in all respect. Wipro Cat. No: LL20-111-XXX-65-AL1 or Equivalent in Philips
52
508
26416
Supply, installation, testing and commissioning of IP40 Batten Led fixture 20 W+/- 1W Surface Mounted Fixture 4 feet long with Polycarbonate diffuser with aluminium housing minimum lumen output 2000 lumens with P.F.0.95 with THD10% ,CCT 5700K, CRI 80,Surge Protection 3 Kv .The LEDs with minimum life of 50000 burning hours. The Input voltage range shall be 150V to 270V . including cost of all petty materials required to complete the job in all respect. Wipro Cat. No LL24-541-XXX-57-XX or Equivalent in Philips.
120
1497
179640
Supply and erection of Galvanised Iron pipe (B-Class) pole welded with M.S base plate of size 15 cm x 15 cm x 3.00mm thick, erection of the pole in ground surrouneded with 15 cm dia of 1:3:6 cement concrete and a plateform 10 cm thick to the size of base plate at bottom including cost of CC Muff as per requirment 3.5 metres long 50 mm dia pole duly embeded 0.7 m below ground level .
12
4522
54264
Supply, Installation, Testing and Commissioning and erection of Exhaust fan 15’’ heavy duty 900 rpm complete with shutter (ISI mark) including cost of petty material required to complete the job in all respect. CROMPTON/Havells/Usha/ Bajaj Premium quality
4
3278
13112
Supplying, installation, testing and commissioning of A.C. CEILING FAN 48” (1200MM) Rating with DOUBLE BALL BEARING, Energy efficient including cost of petty material required to complete the job in all respect. Make : CROMPTON/Havells/Usha/ Bajaj Premium quality
32
1750
56000
Supply, Installation, Testing and Commissioning and erection of FRESH AIR fan 10’’ heavy duty 900 rpm complete with shutter (ISI mark) including cost of petty material required to complete the job in all respect. Make : CROMPTON/Havells/Usha/ Bajaj Premium quality
14
2860
40040
Supply, installation, testing and commissioning of intelligent addressable 1 Loop Main Fire alarm panel complete with sufficient number of loops to accommodate all the BOQ quantity with at least 20% spare capacity on each loop, LCD/VGA display with at least 160 character, Zonal LED indication, Network communication module for peer to peer networking of more panels, compatible to I PA system such as Amplifier, Hooters, speakers etc , Repeater interface, USB port and power supply unit with battery back-up for at least 30 min during alarm and 48 hours standby. Each loop should be capable of accommodating at least 125 detectors and 125 modules. The panel shall be complete and approved by LPCB/UL/VdS.
1
148903
148903
Supply, installation, testing and commissioning of Intelligent addressable multi-criteria smoke/ heat (Photo smoke + Rate of Rise heat + Fixed temp) detectors with pecification intelligence and base. Detector shall be complete fault isolator either built-in or with fault isolator base/module and LPCB/UL/VdS approved.
40
3793
151720
Supply, installation, testing and commissioning of Addressable Manual Call point complete with back boxes and as per technical specifications (LPCB/UL/VdS approved).
3
3830
11490
Supply, installation, testing and commissioning of Loop powered addressable Hooters cum strobe of the same make and listing as fire alarm panel complete with at least 4 selectable tone setting and 2 volume setting requiring no additional control module, monitor module, power supply and cabling. (LPCB/UL/VdS approved)(In case you have detectors with built-in loop powered addressable hooter cum strobes then only rate difference between detector with built-in hooter cum strobe and detector without built-in hooter cum strobe need to be quoted here)
3
8756
26268
Supply, installation, testing and commissioning of 180 W mixer amplifier sufficient to operate all the speakers with at least 20% spare capacity along with compatible Microphone. Amplifier should be with built-in USB and FM / AM Radio feature.
1
91468
91468
Supply, installation, testing and commissioning of Ceiling mount public address speakers to generate 80 dB at 1 mtr.
5
1053
5265
Supply & Laying of 2X1.5 Sqmm shielded fire survival cable recessed in slab/walls including conduits. The cable should be suitable to with stand fire for 2 hours.
960
181
173760
Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. 40mm dia nominal bore (external work)
100
558
55835
Painting GI pipes and fittings with two coats of anti corrosive bitumestic paint of approved quality. 40mm dia nominal bore
100
20
2095
Constructing masonary chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. Surface box 100mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks. with common burnt clay F.P.S.(non module) brick of class designation 7.5
1
10102
10102.5
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 40 mm nominal bore
1
707
707.3
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces,tapers etc if required will be paid separately) : 50 mm dia
1
5171
5171.75
Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil. All kind of soil,gravels. Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia
700
417
292145
Earthwork in excavation by mechanical means ( Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50m. All kind of soil/gravels.
118.8
286
34077.78
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 150 mm diameter
500
458
229000
Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) up to hunches RCC pipes sewer/storm drainage including in bed for pipes to be laid in trenches as per standard details. 150 mm diameter
500
689
344875
Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C. top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80 cm and 45 cm deep including CI Cover with frame (light duty as per IS:12592) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg ( weight of cover 23 kg and weight of frame 15 kg) with common burnt clay F.P.S.(non module) brick of class designation 7.5
27
11687
315551.7
Extra for depth for manholes Size 90 x 80 cm with common burnt clay F.P.S.(non module) brick of class designation 7.5
8.1
8127
65832.35
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement: 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with S.F.R.C. cover and frame (heavy duty,HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
8
11886
95091.6
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
3
6986
20960.4
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with dtand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification make to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
27
487
13151.7
Providing and laying Non pressure NP2 RCC Pipes with collars jointed with stiff mixture of cement mortar in the propoertion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete. 150mm dia RCC Pipe
20
493
9862
Providing and laying Non pressure NP2 RCC Pipes with collars jointed with stiff mixture of cement mortar in the propoertion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete. 250mm dia RCC Pipe
200
811
162230
Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround DWC/RCC pipes sewer/storm drainage including in bed for pipes to be laid in trenches as per standard details. 150 mm diameter
20
1095
21903
Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) alround DWC/RCC pipes sewer/storm drainage including in bed for pipes to be laid in trenches as per standard details. 250 mm diameter
200
1476
295270
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : with common burnt clay F.P.S.(non module) brick of class designation 7.5
18
5589
100610.1
Providing orange color safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with dtand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification make to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
27
487
13151.7
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)
35.68
374
13349.67
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
2.49
6326
15756.93
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
8.73
5746
50169.56
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
40
592
23682
Supplying, assembling, lowering and fixing in vertical position in bor well unplasticized PVC medium well screen (CM) pipes of required dia, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
30
971
29139
Supplying, assembling, lowering and fixing in vertical position in bor well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
10
1099
10992.5
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.53
1302
4600.37
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.53
1309
4624.04
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
3.53
1309
4624.04
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality H D - 20 Circular shape 560 mm internal diameter
4
1494
5976.8
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
1.71
8364
14317
Design, supplying, installing, testing & commissioning of Package type Effleunt Treatment Plant for 2 KLD ETP electro mechanical system consisting of following scope of work.
-
-
-
pH - 6.0 – 10.0
-
-
-
BOD5 - 200 – 300 Mg/L
-
-
-
S. Solids - 150 – 200 Mg/L
-
-
-
Oil & Grease Less than 100 Mg/L
-
-
-
COD - 800 – 900 Mg/L
-
-
-
Desired Effluent discharge standard after ACF are as below:
-
-
-
PH 6.5 – 8.5
-
-
-
BOD5 Less than 30 Mg/L
-
-
-
S. Solids Less than 100 mg/l
-
-
-
COD Less than 250 Mg/L
-
-
-
Oil & Grease Less than 10 Mg/L
-
-
-
pH - 6.5 – 9
-
-
-
Supply, installation, testing & commissioning of 1 Nos SS 304 Perforated Coarse Type Bar Screen Size 600mm x 600mm with suitable garbage lifting arrangement. Make: Jash/Huber/Ecologix/Jhonson
1
24000
24000
Supply, installation, testing & commissioning of level switch
1
9000
9000
Supply, installation, testing & commissioning of Horizontal, non clogging type pumps capable having CI casing & impeller with SS Shaft complete with mechanical seal & all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock. Pumps shall have following duty
-
-
-
Make: Willo/Crompton Greaves/Kirlosker
-
-
-
Submersible Effluent Transfer Pumps
-
-
-
Flow Rate (each) = 0.5 m3 / hr
-
-
-
Head = 8-10 Mtr Cost shall be inclusive of PVC Flexible Pipe 20mm dia , rope for lifting pump from sump to outside.
1
14000
14000
Air diffusion system shall include the following: Supply, installation, testing & commissioning of twin lobe, rotary Air blower capable of delivering 15 cum/hr of free air at required pressure driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Blower Make- Everest/Akash/Beta/ Rootech
-
-
-
Air Blowers
-
-
-
Flow Rate (each) = 15 m3 / hr @ 3000mmwg
1
60000
60000
Air piping complete uPVC with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, paint,supports & clamps, puddle flanges etc cutting chases & making good the wall wherever required. Contactor to submit detailed P & I indicating their proposal.Make: Astral/Prince/Supreme/Vectus
1
30000
30000
Non-clog type air dispersion system capable of handling required 3-5/8-10 cfm of air with oxygen transfer efficiency. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily. (Coarse and Fine bubble membrane diffusers. Make : Rehaue/Ecologix/EDI
1
12000
12000
Providing and fixing all interconnecting piping (as described below) and isolation control valves for making the system complete. The piping material shall be MS 'B' class. MS Epoxy : Non submerged air piping & pumped effluent riser ( non-submerged) uPVC: Submerged air line.uPVC Piping : Interconnecting pipe line after delivery header of pump / filter Make : Jindal/Tata/Supreme/Astral/Prince/Vectus
1
45000
45000
Supply, installation, testing and commissioning of Tube Deck media. The media shall be enough for proper functioning of ETP.
1
5000
5000
Supplying, installing, testing and commissioning of dosing system consisting of one HDPE tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-6 lph. The motor shall be suitable for operation at 240 V/single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall be speed & stroke control. Dosing Pump: Toro/Prominent/Grundfos
4
27000
108000
Supplying, installing, testing & commissioning of centrifugal filter feed pumps, CI body, CI impeller. motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 220±10% volts 1 phase AC supply .
-
-
-
Filter feed pumps: Capacity : 0.5 Cum/hr. Head : 25-30 Mtrs make : Kiloskar/KSB/ Crompton
1
9000
9000
Treated Water Transfer pumps: Capacity : 1 Cum/hr. Head : 25-30 Mtrs Make : Kirloskar/KSB/ Crompton
1
20000
20000
Supplying, installing, testing and commissioning of FRP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc.
-
-
-
Multigrade pressure sand filter Capacity : 0.5 Cum/hr. Filteration velocity : 15 cum/hr/sqm filtering sand, anthracite, pebbles and gravel media Filteration velocity : 15 cum/hr/sqm filtering sand, anthracite, pebbles and gravel media MOC: FRP
1
9000
9000
Activated Carbon Filter Capacity : 0.5 Cum/hr. Filteration velocity : 15 cum/hr/sqm filtering sand, anthracite, pebbles and gravel media MOC: FRP
1
12000
12000
List of Pre Fabricated Tanks in MSEP/HDPE. MS thickness will be 8mm with Epoxy coating/pvc lining. Coagulation Tank (Volume: 0.2KL +FB) in MSEP Flocculation Tank (Volume: 0.2KL +FB) in MSEP Secondary Tube Settler in MSEP Chlorine Contact Tank in HDPE (Make: Sintex/Equiv) 0.5 KL Electrical Panel- Motor Control Centre
1
70000
70000
Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 16 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coate of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cable (in accordance to specificaton) with earthing from panel to each motor / equipment. Make: Ambit/Tricolite/V4/Diamond
-
-
-
Motor Control Centre
-
-
-
Incoming
-
-
-
100 amps TPN MCCB with the following accessories:
-
-
-
a) 0-500 volts 96 x 96 mm square electronic voltmeter with selector switch shall be protected by 2 amps TP MCB. 1 Set
-
-
-
b) 0-100 volts 96 x 96 mm square electronic ammeter with selector switch and 100./5 amps 10 VA CL:1 CTs 1 Set
-
-
-
c) Phase indicating lamps shall be protected by 2 amp SP MCB 3 sets.
-
-
-
Bus Bar
-
-
-
Outgoing
-
-
-
a) Required Nos of required capacity TP MCB for direct on line starter/star delta starters and out going feeders to all the pumps/ blowers etc. (including standbies). Each compartment shall contain auto/ manual selector switch and indicating lamp with MCB's for 'ON/OFF/TRIP' status of motor.
-
-
-
b) Spare MCB's of following capacities
-
-
-
I. 32 amps TPN MCB's 3 Nos.
-
-
-
a) All MCCB's / MCB's shall be of 15 KA breaking capacity and suitable for motor duty application.
-
-
-
b) All motor starters shall be provided with Auotmatic level controller.
-
-
-
c) Star-Delta Starters for other motors.
-
-
-
d) Provision shall be made for providing potential free contacts to all pumps starters
-
-
-
MCC for all STP equipments/ pumps as described in sub head-A with provision for all future pump air blower etc.
1
60000
60000
Supplying, installing, testing & commissioning of Cables , Conector, Cable Trays, to make Electrical Installation Complete.
1
18000
18000
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
21
6941
145767.3
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
7
7004
49031.15
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
53
85
4515.6
Providing & fixing of white vitreous china Under counter oval wash basin 595 x 420 mm with CP brass waste assembly, wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge.
15
5484
82260
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
7
4542
31796.8
Providing and fixing white vitreous china laboratory sink with C.I.
brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste
and 40mm C.P. brass trap with necessary C.P. brass unions complete,
including painting of fittings and brackets, cutting and making good
the wall wherever required : Size 450x300x150 mm
2
4272
8545.9
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
22
1411
31045.3
Providing and fixing toilet paper holder : C.P. brass
21
680
14296.8
Providing & Fixing Glass body liquid soap dispenser with single push lever fitted with liquid soap (one time) including cutting and making good the walls, wherever required.
22
1215
26730
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
22
886
19497.5
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe40 mm dia
2
104
208.7
Providing and fixing CP Brass 600mm Long Towel Rail with fittings, cutting and making good the walls wherever required complete as per directions of Engineer-Incharge.
5
1294
6470.95
Providing & fixing CP brass push type Pillar COCK for wash basin complete including cutting and making good the walls / metalic sheet for wash basin where required.
22
1983
43626
Providing and fixing wall Mounted C.P brass sink cock with swinging type casted spout with wall flange complete to the satisfaction of Engineer in charge.
2
3920
7840
Providing and Fixing of cp COAT Hook complete, including cutting and making good the walls where required.
21
540
11340
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m/1.2m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge.
21
1337
28077
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
17
708
12042.8
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
53
500
26518.55
Providing and fixing 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern of approved quality including cutting and making good the floors etc complete as per direction of engineers charges.
-
-
-
100 mm nominal dia
5
235
1175
125 mm nominal dia
31
772
23932
Providing and fixing S.S. body tissue paper dispenser fixed to PVC cleats with C.P. brass screws wherever required of approved make & quality and as per the directions and to the satisfaction of the Engineer-in-charge.
2
6729
13458
Supply,Installation, testing and commissioning of Water Heater complete with heavy gauge hot and cold water flexible pipe connections, Nano polymer coated tank, 8 bar pressure ,of approved make complete with all necessary material as directed by Engineer - in - Charge. 15-Litre Storage capacity
8
7931
63448
Providing & Fixing of Grab bar 600 mm of non slipping grip as per standard specification of use in disabled toilet complete with brackets suitable for wall installation as per approved sample complete in all respect.
2
2886
5772
Providing and Fixing SS Swing grab bar, fixed to PVC cleats with C.P. brass screws wherever required with approved make & quality and as per the directions and to the satisfaction of Engineer-in-charge.
2
9645
19290
Providing ,Fixing of straight / offset type flexible single body push fit type WC pan connector of with integral single mould sealing fins made of flexible EVA body to be fixed with manufacture supplied grease, including rubber bush / adaptor for use with C.I pipe as supplied with the pan connector.
11
813
8943
Providing and Fixing 2 Bay/2 person manually operated (Elbow/Foot operated) scrub station of approx size 1200 x 600 x 900 mm (and 300mm height SS cladding on wall from top of scrub station) made out of minimum 1.5 mm thick stainless steel Grade 304 sheet along with long bib cock taps (02 nos) etc Complete in all respects. Nothing extra shall be payable for any minor accessories such as connection pipe, other fittings etc.
1
61655
61655
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
7
190
1330.7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia pipe
122.1
441
53864.42
20 mm nominal outer dia pipe
72.6
513
37298.25
25 mm nominal outer dia Pipes
20.9
626
13084.45
32 mm nominal outer dia Pipes
6.6
712
4704.15
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc (Shaft & Terrace)
-
-
-
25mm nominal bore
30
491
14736
32 mm nominal bore
10
563
5636
40mm nominal bore
300
725
217545
50mm nominal bore
20
893
17864
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
25mm nominal bore
30
25
768
32 mm nominal bore
10
30
307
40mm nominal bore
300
36
10815
50mm nominal bore
20
43
861
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
20 mm nominal bore
2
461
923.5
25 mm nominal bore
11
589
6488.9
32 mm nominal bore
3
581
1743.75
Providing and fixing thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex, nitrile or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 Kg/m3 over pipes of following sizes including all required accessories complete as per Manufacture's specifications and finishing complete in all respect as directed by Engineer-in-charge. 15 mm nominal bore
30
224
6720
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm. 15mm
1
1308
1308
Providing and fixing gun metal non- return valve of approved quality (screwed end) :Horizontal 50 mm dia
1
1173
1173.65
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
20 mm dia nominal bore
4
289
1156.2
25 mm nominal bore
6
369
2216.1
32 mm nominal bore
6
409
2456.7
40 mm nominal bore
10
523
5232
50 mm nominal bore
5
706
3533.5
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank
15000
9
145500
Providing and fixing of floating valve including rod, ball and other accessories complete in all respects 32mm dia.
1
1260
1260
Providing and Fixing uPVC pipes type -B conforming to IS: 13592 for soil, waste and vent pipes including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, clean out plug, jointing with rubber ring joints with lubricant etc. fixed with clamps to walls with cement concrete 1:2:4 blocks complete in all respects.110 OD mm dia Pipes
223.3
520
116116
Providing, fixing, jointing and testing in position the following uPVC pipes conforming to IS: 4985 of 6 kg/sqcm pressure rating including all fittings, solvent weld joints, testing complete for drainage system cut to required length to be laid under floor including covering all around with cement concrete and making good the same complete as required.
-
-
-
40mm OD Pipes
33
199
6567
50 mm OD Pipes
35.2
245
8624
Providing and Fixing 110x110 mm uPVC 'P' trap with Height riser/Saddle as required size ftting with seal 50 mm of self cleansing design floor/urinal trap without vent suspended with supporting clamp or in sunken portion including cutting and making good the walls and floors wherever required complete in all respects.110 mm inlet & 110 mm outlet
31
1400
43400
Providing and Fixing uPVC floor drain of following size inlet and outlet including cutting and making good the walls and floors wherever required complete in all respects
10
920
9200
Providing and fixing END CAP or Clean Out Plug (Ceiling or Floor) with suitable inset keys for opening, male threaded joint with socket fixed to uPVC/SCI pipe complete in all respects. 100mm dia
5
516
2580
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
18
47
862.2
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
18
266
4798.8
Providing and fixing rain water pipes of 6 kg./cm2 conforming to IS: 4985 including all fittings with or without access door or without access i.e bends, junctions, cowls, offsets, etc., and jointing with solvent cement and excavation, refilling and disposal of surplus earth, including cutting holes in walls and floors, excavation, refilling and disposal of surplus earth wherever required and making good the same, complete as directed by the Engineer-in-Charge. 110 mm dia
99
778
77022
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way - 100 mm dia M.S. Pipe(Make-Andex,Newage,Minimax)
1
6590
6590
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
1508
1508
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :(Make-Andex,Newage,Minimax)
2
5987
11974
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :(Make-Andex,Newage,Minimax)
2
1648
3296
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :(Make-Andex,Newage,Minimax)
4
4434
17736
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.(Make- index,Newage,Minimax)20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m
2
8413
16826
Providing and fixing angle iron (40mmx40mmx5mm) door frame and MS sheet shutter (1 mm thick) partly glazed(glass thickness 6mm) of size 0.9mx2.1 mtr with 25mmx25mmx3mm angle frame all around and stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c cautionary signs and writing on internal hydrant including providing & fixing S.S. sheet 2mm thick on remaining portion above door to close opening i/c painting etc. as required.
2
10688
21376
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.(Make-Jindal Hisar,Tata,Sail) 150 mm. Dia
15
2376
35640
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(Make-Jindal Hisar,Tata,Sail)
-
-
-
25 mm dia.
4
471
1884
80 mm dia.
8
1122
8976
100 mm dia.
40
1499
59960
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :(Make-Zoloto,Sant)
-
-
-
100mm dia.
3
6454
19362
80mm dia.
2
4842
9684
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :(Make-Zoloto,Sant,) 100 mm
2
10836
21672
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(Make-Zoloto,Sant) 25 mm nominal bore
4
497
1988.6
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.(Make-Zoloto,Sant,)100 mm dia.
2
6450
12900
Providing & fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification.(Make-Zoloto,Sant)
1
883
883
Providing and fixing Pressure gauge (0-15 Kg/Cm2) complete with shut off valve duly calibrated before installation complete as required & as per approved specification and directions of Engineer in charge. 150mm dia.
2
1722
3444
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
18009
18009
Providing and fixing reinforced neoprene rubber vibration eliminators/expansion joints (to provide relief from stresses at pipe flanges) suitable for upto 20 kg/cm2 pressure, complete as per specification. 100 mm dia
2
8955
17910
Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.(Make-Newtech,Spago India,Minimax)
3
11639
34917
Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire extinguisher, water (gas pressure) type capacity 9 ltr. with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications.(Make-Newtech,Spago India,Minimax)
2
12843
25686
Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifications.(Make-Newtech,Spago India,Minimax)
3
5753
17259
Providing and fixing Clean Agent Modular (ceiling mounted) Type Capacity 5 Kg CE certified Fire Extinguisher filled with HFC 236FAClean Agent Gas. Complete in all respect.(Make-Newtech,Spago India,Minimax)
2
43479
86958
Providing and fixing CO2 type fire extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher actuated through a sprinkler head mounted on The extinguisher body finished externally with red enamel with trolly mounted complete with internal charge.(Capacity 22.5 Kg.)(Make-Newtech,Spago India,Minimax)
1
33044
33044
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (Make-Aqua Core,KSB,Grundfos)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35 m Head
1
100946
100946
Providing, fixing, testing and commissioning of control panel for Terrace Booster pumps . Incoming: MCCB 35A 1 set of Phase indicating lamps, 1 set of 35A Al bus bars, 1No Ammeter, 1No Voltmeter with phase selector switch Feeder for Booster Pumps - 1 No. 1 No. 32A TP MCCB without releases. star delta starter with over load relay, single phase preventor and indicating lamps with ON/OFF push buttons. 1 No. Automanual selector switch. Suitable for booster pumps
1
53119
53119
Supply of UPVC (10Kg/ cm sq) drain water piping complete with fittings, support as per specification and 19 mm thick insulation with Class O Nitrile Rubber insulation. 25( Internal) mm dia
55
40
2211
Supply, Installation, Testing and Commissioning of 5 star inverter technology turbo cooled split air conditioner including indoor, outdoor units, 5 KVA stabilizer, allied copper piping, insulation,wiring, terminations, de-humidifier facility, eco-friendly refrigent gas, remote control, powder coated stand for wall/floor, fixing drain pipe in wall by chase cutting& repairing etc complete in all respects as per directions of Engineer-in-charge
-
-
-
1.5 TON
5
49966
249834.05
2.0 TON
6
62156
372940.86
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%