Forest Environment And Climate Change Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Forest Environment And Climate Change Department Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date25 Mar 2024
Closing DateCancelled
Tender AmountRefer Documents
Costs
EMD
₹ 11,72,709Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Construction Of Cheetah Enclosure And Allied Works Inside
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NZP_102947_1Tender No
38/PMU/NKZPTender Authority
Forest Environment And Climate Change Department ViewPurchaser Address
-Website
http://tendersodisha.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Add for lead upto 3 km including levelling.
505.1
-
-
Add for each additional lead of 1km beyond initial lead of 3km including levelling.
13662
-
-
Filling in plinth, floors, trenches, pits with approved excavated materials, murum / good earth in layers not exceeding 200mm including breaking of clods, watering, consolidating each layer in
272.06
-
-
Supplying, screening and spreading in position white sand 1.5 mm to 2mm in size for various animal exhibits in Zoo including transportation, spreading in layers etc complete as directedby the engineer in charge.
13.57
-
-
Excavation by chiseling by manual operations, pneumatic breaker, hammer, drilling, compressor breaker, jack hammer etc. over areas for basements, roads, land/plot developement etc. in
24.55
-
-
Anti-termite Treatment
-
-
-
Providing Pre-constructional anti-termite treatment conforming to IS 6313 (part II) using chloropyrifos EC 20 Emulsion or equivalent of 1% concentration by weight for creating barrier under and all around
2708.71
-
-
Providing & Laying dry stone Rubble Soling with average 230 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering, sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge. (Note: The rate includes the royalty and other taxes if any)
203.59
-
-
Concrete Works
-
-
-
Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix from Engineer-in-charge and fly ash conforming to grade I of IS 3812 (Part 1) only be used as part replacement of M-15 grade plain cement concrete (cement content considered @ 240 kg/cum).
152.11
-
-
Providing and laying in position ready mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement Foundations, footings, bases of columns, rafts, pilecap
115.48
-
-
Lintels, beams, plinth beams, girders, floor beam, coping.
63.3
-
-
Columns, Pillars, Piers, Posts and Struts.
45.11
-
-
Walls (any thickness) including attached butteresses, ,retaining wall, shear wall, diaphragm wall , trench,pit walls, etc
10.1
-
-
Slabs, Suspended floors, roofs, landings, balconies, canopy and access platform
27.98
-
-
Extra and over for providing richer RMC of M-25 grade cement concrete instead of M20 (Note :- Cement content considered in this item is @ 330 kg/cum as per IS 456 table showing minimum cement content.)
261.97
-
-
Reinforcement Steel
-
-
-
Providing and fixing in position steel bars reinforcement of various diameters for R.C.C. pile, pile caps, footings, raft, retaining wall, shear wall, lift wall, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and bar bending schedules,including straightening, cutting, bending, hooking the bars, binding with wires or tack welding, supporting as required etc. all complete at all levels.
Thermo-Mechanically Treated steel bars. (Fe 500 D)
22.33
-
-
Providing and fixing of the precast kerb stone of height 325mm, base width 165mm, top width 115mm in M20 grade RMC supplied through MCGM approved plant or concrete mixed with use of weigh batch mixers as detailed in drawing u/No.Dy.Ch.E./Rds/93 /E.S. of 17 / 8 / 2005 , excavation in any soil except rock, laying a levelling course of M 15 grade RMC 100mm thick, to required slope (inclusive of form work) jointing in C.M.1:2 proportion flush to concrete surface, painting exposed surface with one coat of primer and two coats of 1st grade road marking paint in the yellow/ white/ black or any shade as directed. (Kerbstones shall be procured from MCGM registered agencies).
90
-
-
Brick Masonry
-
-
-
Brick work with Flyash bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in :Cement mortar 1:3 (1 cement : 3 coarse sand)
115.51
-
-
Wood work
-
-
-
Providing and fixing country teak wood in square scantlings framed trusses, purlins, principal rafters, ridges, posts stiffeners, trellis etc. complete including necessary iron works for proper fastenings of members etc.,complete.
14.63
-
-
Providing & applying readymade wax polish to the new or old work in two coats including knotting, preparing the surface by scrapping, scaffolding etc. complete as directed.
227.01
-
-
Water proofing
-
-
-
Do with broken China mosaic flooring instead of IPS set in cement mortar (1:4) 40 mm thick
218.06
-
-
Extra for providing additional thickness of brickbats over 100 mm in 1:5 c.s. either due to location of rain water pipes or due to increase in the travel length of flow of rain water or brick bats required in the sunk portion of baths, W.C.s nahani etc. The rate includes for fixing brickbats in C.M., with waterproofing compound as per specification as directed.
32.71
-
-
Providing and installing crystalline waterproofing treatment to inside surfaces of the water retaining structures VERTICAL SURFACES :a) 11 Treatment shall consist of preparation of surfaces including ‘V’ QOFgrooves at junctions and joints, pressure grouting the same and curing for specified period.b) Applying two coats of approved crystalline waterproofing compound at specified intervals as recommended by manufacturer and as directed by Engineer-in charge and allowed to cure.c) Plastering of walls and finishing smooth with 15 mm thick cement mortar 1:4 (1 cement : 4 fine sand) admixed with approved waterproofing compound in recommended proportions. HORIZONTAL SURFACES :d) Laying of 30 mm average thick cement concrete as per direction of engineer -in-charge.
55.13
-
-
Providing waterproofing treatment from outside to basement lift-pits and other under ground structures during construction. The treatment shall be started after the P.C.C. bedding for the base slab or raft slab is laid. On the P.C.C. bedding a waterproofing layer based on cementwith rough shahabad stones of 20 to 25 mm thick well pointed in the joints with 1:3 C.S. 40 mm thick for floors and 20 mm thick for sides with cement float and water proofing compound as per specifications shall be laid. Then the surface shall be superimposed by regular R.C.C. raft or base slab as per design. After completion of the raft / base slab and side walls the treatment of waterproofing layer shall becontinued along the outer surface of the walls upto a height of 30 cm above the adjacent ground level. (The excavation of the side around the walls shall be filled with soft earth by the contractor ). The total thickness of the treatment shall be 65 mm to 75 mm for floors and 32 mm to 38 mm for walls.
70.37
-
-
Providing water proofing treatment to existing RCC overhead tank, basements, lift-pits and other underground structures. The treatment shall be done by giving INJECTIONS wherever necessary with waterproofing compound and cement solution as per tenderer‟s specifications into the floor & walls upto the full height of structures. All inherent holes, cavities, voids & honeycomb shall be filled up to make the structure consistent, homogenous resistant to water breakages, seepage, dampness and moisture etc. The floor shall then be treated with waterproofing metal coba of 30 mm to 35 mm thick in 1:4 C.S. mortar and walls with first coat of waterproofing ...
38.55
-
-
Structural Steel Work
-
-
-
Porforated Sheet for Grating covers
0.64
-
-
Providing, detailing, composite fabricating members like Trusses, N girders, girders, bracings,supports, purlins, runners, and similar structural steel members fabricated using SS316L & highergrade hollow tubular steel sections (circular & rectangular pipes) of Jindal/ SAIL/ TATA/GoldenStructural Make or equivalent conforming to IS: 4923/IS 6911 and ASTM A312 and of grade SS316L & higher grade as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportation of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts,fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operationslike preheating as per specifications, straightening, bending, cutting, drilling, grinding,machining if specified, welding, grinding, removing the welding burr etc complete as directed byEngineer In Charge."This Item is approved for Zoo works Only
75.52
-
-
Providing & Fixing Stainless steel Welded Wire mesh fencing of required opening of 50 mm x 50mm x 4mm Dia as required with main & cross wires of SS316L & higher grade Jindal/TATA/SAIL/ Golden Structural Make or equivalent make as per manufcturer specification(manufcaturer test certificate to be provided) with necessary fittings, including cutting, welding, riveting, polishing etc complete as directed and specified by Engineer-In-Charge. "This Item isapproved for Zoo works Only "
578.33
-
-
Providing, detailing, and fabricating as per specifications, transporting to site and erecting ladder/ railing using stainless steel hollow pipes of grade 202 including, S.S. fixtures and fastenings, cleats, stiffeners, gussets etc. and all necessary operations straightening, bending, like cutting, drilling, welding, grinding and removing the welding burr, machining if specified, finishing, cleaning etc. complete as directed by Engineer-In-Charge
1606.5
-
-
Roofing
-
-
-
Supply & Installation of Artificial Thatch with vertical gap of approximately180mm (or 100 mm frombase tip to tip). the shingles are fastened and secured in place with corrosion resistant steelpins/staples through the welded head or through the straws 50 mm below the welded head( please seebelow points of fastening) with a minimum 4 pins per shingles. Including water proof membrane laidon 19mm thick marine ply as required (Overlap will not be paid separately)
246.85
-
-
Door & window
-
-
-
Providing and fixing superior quality single leaf B.W.P. grade solid core flush door shutters of standard make conforming to IS:2202- 1991 (Part I & II) including one coat of primer, putty and 2 coats of synthetic enamel paint on both faces etc. with 12 mm thk teak wood lipping all around all around etc. complete (Hinges, aldrop & standard door hardware to be paid separately) 40mm thick shutter
2.1
-
-
Extra for providing and fixing 3mm thk. veneer with three coats of french polishing instead of synthetic enamel painting including all material and labour.
2.1
-
-
Providing and fixing 38 mm x 20mm thick teak wood decorative cover moulding around frame of doors, windows and cupboards etc. completed as directed.
5.2
-
-
Providing and fixing vision panel of size 300mm x 300mm in any type of door with 6mm thick glass including T.W. beading etc. complete as directed bt Engineer in charge.
1
-
-
Providing and fixing in position three track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 92 mm x 45.5 mm x 1.5 mm thk (wt 1.659 kg/Rm) for bottom and 92 mm x 31.75 mm x 1.3 mm thk. (wt 0.933 kg/Rm) for top and sides mounted on anodized aluminum rectangular
1.44
-
-
Providing and fixing handles as described below, manufactured as per IS208-1992 for doors and windows and with necessary materials and fixtures like screws etc. and all labour etc. completed. Standard Stainless Steel150 mm long.
2
-
-
Providing and fixing mortise lock of approved make manufactured as per IS2209 and 6607 and as described below for doors with necessary fixtures andmaterials and labour etc. complete.Chromium plated Brass mortice latch and lock with round knob
1
-
-
Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete 250 mm
1
-
-
Providing and fixing door stopper as described below of approved make manufactured as described below and as per IS1823- 1992 for doors with necessary materials and labour cost etc. complete.Stainless steel door stopper
1
-
-
Providing and fixing tower bolts as described below conforming to IS:204 1992 (PartI,II) for doors & windows with necessary materials and labouretc. complete.100mm long
2
-
-
Supply, Installation, Testing and Commissioning (SITC) of Acrylic Panels (from firms/organisations/company registered in Europe/USA) including but not limited to following:i. Supplying of Acrylic panels having size as specified in drawing (or nearest size as availablewith manufacturer) with light transmission 90% and more.ii. Loading & unloading, material handling till the desired location i.e. from Port to concreterebate (concrete frame)iii. Preparation of concrete rebate (concrete frame) for installation of acrylic panels includingCopper slag blasting/sand blasting, application of Epoxy material like SIKA, BASF, FORCROCK orEquivalent approved by Consultant/ Engineer.iv. Installation of Acrylic panels in concrete rebate (concrete frame) including but not limited tofixing of baker rods, SS 316L framing, application of Silicon sealant, brackets etc as required.v. Hydrotesting as per norms, wherever required.vi. Taking all safety measures during SITC of Acrylic glass panels.vii. Submission of Stability & Guarantee certificate from Manufacturer/supplier for min. 10 years.The price shall inclusive of all taxes/levies, Import Duty, Freight, Octroi & Transportation up tosite, loading-unloading & material handling charges, installation etc complete. "This Item isapproved for Zoo works Only "
1706.4
-
-
Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed.
2.25
-
-
Providing and Fixing for Stainless Steel 316 Grade Chain Linked 10mm for operation of Holding doors, complete as directed by Engineer-in-charge
49.38
-
-
Supply & Installation of Pully with braket Dia 4” for SS316 Grade Holding Doors complete with necessary fittings, including cutting, welding, riveting, polishing etc complete as directed and specified by Engineer-In-Charge.
32
-
-
Supply & Installation of Pully with braket Dia 6” for SS316 Grade Holding Doors complete with necessary fittings, including cutting, welding, riveting, polishing etc complete as directed and specified by Engineer-In-Charge.
6
-
-
Supply & Installation of SS316 Grade Wheels with Bearing having 4” Dia complete with necessary fittings, including cutting, welding, riveting, polishing etc complete as directed and specified by Engineer-In-Charge.
12
-
-
Supply & Installation of SS316 Grade 10mm Chain complete with necessary fittings, including cutting, welding, riveting, polishing etc complete as directed and specified by Engineer-In-Charge.
600
-
-
Finishes
-
-
-
Sill & jam for window Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement 25 to 30 mm thk. Kota stone of size 0.430m x0.56m (17"x22") complete in all respect as per the direction of engineer-in charge.
157
-
-
Providing and fixing polished natural stone tiles /slab as specified below of approved quality, pattern and colour for flush/projected skirting and risers .. 15 to 20mm thk. Kota stone for height upto 150 mm
10.9
-
-
Providing and applying 20 mm thick internal sand faced cement plaster at all heights and locations in cement mortar specified below in two coats for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc complete as directed By Engineer In Charge, In cement mortar 1:3.
520.52
-
-
Providing and applying 12 mm thick internal ceiling plaster with neeru finish by using ready-mix Roofit mortar as per manufacturers recommendations at all heights and locations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete.
165.52
-
-
Providing and applying 25 mm thick external sand faced cement plaster with neat cement rendering upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS2402 of 1963.) In cement mortar 1:2
695.36
-
-
Providing and applying first single coat of approved primer and two coats of dry distemper paint (water bound distemper) of an approved make and colour as per manufacturers
686.04
-
-
Providing and applying first single coat of approved primer and two coats of waterproof cement paint of an approved make and colour as per manufacturers specifications to any surface, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means,watering, scaffolding, cleaning and curing etc. complete as directed b Engineer-in-charge
695.36
-
-
Designing, providing & Fixing theme & conception based Architectural Feature work made up of GRC 25 to 30mm thk.(composite Mixture of white cement, alkali resistant fiber, silica sand, water with admixture, pigmented cured with acrylic thermal plastic) arch/artistic pillars / window sill / keystone / cornice band / pediment / curved atrium ceiling of museum building etc. Any pattem as per conception design including preparing the moulds for casting . making the grc compostte material , applying the mateiial in moulds . demoulding the cured GRC elements from moulds,grinding and finishing the deinoulded. GRC elements. fixing at site using ss screws. anchors viz a Yiz. finislung the groves and joints with GRC mixture
1302.71
-
-
Providing and applying cement plaster for band projections of 25 to 30mm thk. and 75 to 125 mm wide, with smooth/ decorative/ rough finsihed surface, at all heights and locations in cement mortar 1:3 for masonry (except stone masonry) and concrete surfaces including, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as
directed B En ineer - In Charge
220
-
-
Providing and laying rough natural stone tiles 25 mm to 30 mm thick of an approved quality and size for paving / flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cement float, pointing in cement mortar 1:3, cutting, dressing, leveling, jointing, pointing, curing, finishing etc complete as directed by Engineer In Charge. 25 to 30 mm thk. rough Ruby red, jet black, Hasan green granite stone
107.86
-
-
DRAINAGE SYSTEM
-
-
-
Excavation in all types of soils (for sewerage works),such as Earth, Marine clay, Marshy land, Running sand, Garbage, Slush, Murum, Rock boulders etc as directed by the engineer. The rate includes dewatering, backfilling, removing the rank vegetation and removing the excavated materials within a lead of 150M as directed including levelling, ramming,etc complete, and measured from the edge of cutting including all lifts and stacking in layers and removing the surplus excavated materials as directed for lift upto 2M{Records to be maintained properly}.The rate also includes supporting public utilities such as cables,drains,pipe water mains, but shall not include the cost of shoring etc as specified and directed. 1) The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc. 2) It also includes the royalty and other taxes if any.
104.58
-
-
Constructing brick masonary inspection chamber rectangular 0.9M x 0.45M and0.6M deep on sewer with 230mm brick walls in cement mortar 1:3 plastered both inside & outside with 20 mm thick cement mortar 1:2 and neat cement rendering so as to give a smooth surface including 230mm cement concrete bedding (M 15) and cement concrete (M 15) in haunches and channels finished smooth with 20 mm thick cement mortar( 1:1) and fixing C.I. extra heavy duty airtight rectangular frame & cover of size 0.9M x 0.45M weighing minimum 225Kg. resting on 300 mm high c.c.cap M 20 with (1:1) cement plaster on both the sides & necessary C.I. steps ( weighing 5.4 kg each)staggered at 300mm c/c. including 75 mm wide vata all round the external portion of the chamber and the foundation concrete in C.M. 1:1 etc. complete as per plan in Dy.Ch.E.(SP)P&D's office( without excavation ) .
2
-
-
Extra over above for every additional metre depth upto 2.5M -do- -do-etc. complete as specified and directed.
8
-
-
Extra over above for every additional metre depth upto 2.5M -do- -do-etc. complete as specified and directed.
4
-
-
Constructing on sewer brick masonry conical manholes 1.2M dia. at bottom 0.56 M. dia. at top, built in brick masonry in cement mortar 1:3, plastered both inside and outside with 20 mm thick cement mortar 1:2 and neat cement rendering so as to give a smooth surface,including 300 mm thick M.15 cement concrete in foundation and in haunches and channels finished smooth with 20mm thick cement plaster in cement mortar 1:1 and providing C.I. steps (weighing 5.4 kg each) staggered at 300 mm. c/c including 75mm wide vata all round the external portion of the manhole and the foundation concrete in cement mortar 1:1 and supporting the incoming pipes with brick masonry wherever necessary including C.I. extra heavy duty (EHD) air-tight circular frame & cover (minimum 230 Kg.) with hinge/chain resting on 30 cm high cement concrete M.20 cap with necessary centering etc. all complete as per standard specifications and directions including finishing the cap with cement plaster on both sides 1:2 and neat cement rendering so as to give a smooth surface in line and level with the brick masonry surface and as per drawing inDyCh.E.(Sewerage)P&D's office without excavation depth upto 1.5 M.
1
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
With Flyash bricks of class designation 3.5
6
-
-
Providing, Laying and Jointing Double Wall Corrugated (DWC) PE pipes of SN 8 class with R/R joint with PE coupler as per ISO21138-3 complete as specified and directed.
160 mm dia (OD)
124
-
-
Supplying & fixing 40 mm thick DI heavy Rain water grating over storm water channel of heavy duty. a) 600 x 300 MM(300wide)
35
-
-
Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).
12
-
-
Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 160 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).
60
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
(40 mm dia)
21
-
-
Supplying & Fixing Agricultural PVC 10 kg class pipe as IS 4985-2000 of Approved make with P.V.C. fittings including Chasing of Brick wall & making good the same with 1:3 cement sand plaster using Chiken wire mesh etc. complete a) 50 mm (1 1/2") dia.
10
-
-
Providing fixing testing and commissioning 0.9m x 1.25m x 1.0m deep Grease trap (0.60m liquid height) constructed out of 230 mm brick masonry with PVC Tee connection for inlet outlet & vent, DI MD Manhole cover and frame (Cover size 0.9 x 0.45 m wide 2 nos.) , 40 mm thick Kaddappa baffle wall situated across the chamber. Trap shall be internally smooth plastered with internal & externally Complete with 2 Nos 0.4 M x 0.85 M x 0.1 M high SS 304. perforated trey's with handles on both side including all accessories mounting. complete as specified in drawing
1
-
-
Slotted cowl (terminal guard )75 mm dia -CI
4
-
-
Supplying ISI mark C.I. Class 'LA' , S/S pipes of followingdiameters conforming to IS:1536, excluding all taxes (Centraland local) insurance, railway freight, unloading from railwaywagon, loading into trucks, transport to any municipal stores /site, unloading stacking etc complete in all respect and asdirected by Engineer in Charge.
(80 mm.)
83.5
-
-
Supplying ISI mark C.I. Class 'LA' , S/S pipes of followingdiameters conforming to IS:1536, excluding all taxes (Centraland local) insurance, railway freight, unloading from railwaywagon, loading into trucks, transport to any municipal stores /site, unloading stacking etc complete in all respect and asdirected by Engineer in Charge.
(100 mm.)
61.5
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved
80 mm nominal bore
1
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:4:8 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design With FLYASH bricks of class designation 3.5 complete in all as per direction of engineer in charge
1
-
-
75 mm C.I nahani trap with grating with 75 mm C.I. bend with cleaning caps fixed compleate
28
-
-
Providig& Supplying & Fixing 100 mm dia. CI 'P' trap Suspended type floor Drain of standard design. with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4.
3
-
-
Supplying &Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4. a) 80 mm (3") dia
4
-
-
Supplying &Fixing screwed cast brass cleanout plug with suitable inset keys & opening, male threaded joint with EPDM rubber gasket jointng as pe DIN- 19543, ASTM C 1277-4. b) 100 mm (4") dia.
6
-
-
SANITARY FIXTURES
-
-
-
White Vitreous China of 'Hindustan &Parryware' make or equivalent under counter type Oval wash basin of size 550 x 480mm with CI brackets suitable for mounting below granite counter including waste fitting with CP brass bottle trap, angle valve with CP connection etc as specified. Oval Wash Basin Model No.10051 OR consider equivalent make.)
16
-
-
Supplying & Fixing Hindware make flat back Urinal rear inlet with urinal flush valve of Jaquar make including CP SS dome shaped grating C.P. west coupling, CP spreader, CP `P' trap.(Urinal White color Model no.60002, Jaquar Make Push Type Valve Cat.No.PRS 077 OR consider equivalent make)
10
-
-
P/F white wall hung WC hindware with necessary cantilever/chair bracket with nut bolt etc. complete directed by EIC..(White color Wall Hung EWC Model No. 20024 OR consider equivalent make
22
-
-
Providing & fixing in position `Jacquar Continental' make CP Jet Spray with flexible CP supply pipe, and all other accessories, complete
22
-
-
Providing and fixing ISI marked make CP brass liquid soap dispensers with CP brass bracket capacity 250 ml.
8
-
-
Providing and fixing JAQUAR MAKE,HOTELIER series Model No. 1551 Toilet Paper Holder Recessed type (S.Steel) including cutting and making goodthe wall wherever required etc complete
22
-
-
STORM WATER DRAIN
-
-
-
Excavation for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in all types of soils, vegetable earth, soft murum, running sand, shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/ marshy/ slushy soil, marine clay, reclaimed land etc. for depths/lifts upto 1.5M measured from the ground level, including dressing/ trimming the sides, leveling and ramming of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking the selected material in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, loading, unloading, leveling excluding shoring, strutting etc. complete as directed by Engineer-in-Charge. Note: 1) The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc. 2) It also includes the royalty and other taxes applicable if any.
83.8
-
-
Extra over above item for lift from 1.5m to 3.0m.
15
-
-
Providing and laying 150mm dia NP2 Class R.C.C. Hume pipes with Collar joints conforming to IS 458:2003 and laid on approved bedding as per IS 783:1985 (reaff. 2010) including jointing the pipes and filleting with hemp and stiff mix of cement mortar 1:2, including testing of pipes at contractors costs (in presence of municipal staff) as per IS 3597 etc. complete as specified & as directed by Engineer in Charge. (excluding necessary earthwork & bedding ).
148
-
-
Providing and laying 250mm dia NP2 Class R.C.C. Hume pipes with Collar joints conforming to IS 458:2003 and laid on approved bedding as per IS 783:1985 (reaff. 2010) including jointing the pipes and filleting with hemp and stiff mix of cement mortar 1:2, including testing of pipes at contractors costs (in presence of municipal staff) as per IS 3597 etc. complete as specified & as directed by Engineer in Charge. (excluding necessary earthwork & bedding ).
6
-
-
Providing & Fixing 0.45m X 0.45m clear internal size of M.S. Galvanised hinged type grating and frame (weighing minimum 53 kg) with minimum 75 microns zinc coating by hot dipped galvanising the MS grating and frame as per IS 2629. (The contractor shall furnish the certificate of galvanising from the Galvaniser.) including testing ,inspection of material sample and finished product in presence of M.C.G.M. Engineers (3 nos.) at Manufacturers works, as per Standard Specification no SP-SWD-2 and as per drawing (Dwg No. MCGM/SWD/2013-08), etc complete as specified & as directed by Engineer in Charge.
16
-
-
Providing & Fixing 0.60m X 0.50m clear internal size of M.S. Galvanised hinged type grating and frame (weighing minimum 71 kg) with minimum 75 microns zinc coating by hot dipped galvanising the MS grating and frame as per IS 2629. (The contractor shall furnish the certificate of galvanising from the Galvaniser.) incuding testing ,inspection of material sample and finished product in presence of M.C.G.M. Engineers (3 nos.) at Manufacturers works, as per Standard Specification no SP-SWD-3 and as per drawing (Dwg No. MCGM/SWD/2013-03), etc complete as specified & as directed by Engineer in Charge.
2
-
-
Supply of 1.20m X 0.60m clear internal size of M.S. Galvanised hinged type grating and frame (weighing minimum 130 kg) of grade HD20,with minimum 75 microns zinc coating by hot dipped galvanising the MS grating and frame as per IS 2629. (The contractor shall furnish the certificate of galvanising from the Galvaniser.) incuding testing ,inspection of material sample and finished product as per IS standards and as per Standard Specification no SP-SWD-3 and as per standard drawing , etc complete as specified & as directed by Engineer in Charge.
2
-
-
WATER SUPPLY SYSTEM
-
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External work
25 mm dia nominal bore
57
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
Internal work - Exposed on wall
15 mm dia nominal bore
6
-
-
20 mm dia nominal bore
7
-
-
25 mm dia nominal bore
13
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:4:8 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design .
With common Fly ash bricks of class designation 3.5
3
-
-
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 15 mm (1/2") dia.
1
-
-
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines (Leader/ZOLOTO make) 25 mm (1") dia.
6
-
-
Providing, fixing and testing heavy quality gun metal or brass ball valve with screwed ends 20kgm class on GI or copper pipe lines(Leader/ZOLOTO make) 32 mm (1 1/4") dia.
3
-
-
15 mm C.P.brass tap
6
-
-
Supply & installation of Float valve on the Condenser water pipe line – 25 mm diameter
3
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal outer dia Pipes
35
-
-
20 mm nominal outer dia Pipes
55
-
-
25 mm nominal outer dia Pipes
70
-
-
32 mm nominal outer dia Pipes
42
-
-
ELECTRICALS
-
-
-
MAIN LT PANELS AND DISTRIBUTION BOARDS
IP43 8 Way TPN DB (8 + 24Way)
1
-
-
Unit rate of 240V/415V, 'C' Curve, 10kA, Miniature circuit breaker suitable for DB mounting complete with connection,testing & commissioning etc. as required
10A SP MCB.
8
-
-
16A/20A SP MCB
8
-
-
ELCB with 30mA Sensitivity 40Amp. 4Pole
1
-
-
ELCB with 30mA Sensitivity 25Amp. 2Pole
3
-
-
LT CABLES AND CABLE TERMINATIONS, TRAYS AND RACEWAYSCables : Supply & laying " XLPE cables" on walls or through existing trenches etc. (SP-ME-TS- 6): LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser client is included in scope.
2nd category Al armoured cables FRLS outer sheathed- 4C x 10 Sq.mm
110
-
-
Cable End Termination For Aluminium Cables : (SP-ME-TS-6)
Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables Including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of aluminium lugs for aluminium cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories
Cable End Termination For Aluminium Cables – 4C x 10 Sq.mm
2
-
-
1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables (SP-ME-TS- 6)
2nd category Cu armoured cables FRLS outer sheathed- 3C x 2.5 Sq.mm
350
-
-
2nd category Cu armoured cables FRLS outer sheathed- 3C x 4 Sq.mm
400
-
-
2nd category Cu armoured cables FRLS outer sheathed- 4C x 10 Sq.mm
110
-
-
Cable End Termination For Copper Cables : (SP-ME-TS- 6)
Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of tinned plated copper lugs for copper cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories as per direction of engineer in -charge
Cable End Termination For Copper Cables – 3C x 2.5 Sq.mm
4
-
-
Cable End Termination For Copper Cables – 3C x 4 Sq.mm
4
-
-
Cable End Termination For Copper Cables – 4C x 10 Sq.mm
2
-
-
EARTHING AND EARTH STRIPS
S.I.T.C of maintenance free earthing comprising 17.2 mm electrode
1
-
-
The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system
1
-
-
Earthing Continuity Conductors (SP-ME-TS-38)
Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments,painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work.
Earthing Continuity Conductors -25 x 6mm GI
46
-
-
Earthing Continuity Conductors -Bare G.I. Conductor size 10 SWG
30
-
-
POINT WIRING SUPPLY & LAYING OF PVC CONDUITS
25 mm.- Only PVC Conduits
2200
-
-
5A/6A - 3/5 Pin Plug On Board
6
-
-
15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch
8
-
-
Submains-FRLSZH-medium PVC conduit- 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire in 20mm Conduit
800
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20mm Conduit
375
-
-
SUPPLY AND INSTALLATION OF LIGHT FIXTURES AND FANS FANS (SP-ME-TS-28)
Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation
1
-
-
Wall mounting air circulator of 450mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with all necessary accessories for completing installation.
5
-
-
1x28W, T-5 Fixtures, comprises of M.S.Powder coated with end cap. The fixtures complete with high efficiency electronic ballast and PF= 0.98 complete with bright reflector & T-5 lamp
8
-
-
EMERGENCY LIGHT FITTINGS
LED Emergency Light Fitting With 6 W LED Strip , IK - 05 Rating With Flame Retardant Enclosure With Lumens Efficacy of 120 Lumens / Watt , Lithum Ion Rechageable Battery With 3 Hrs Battery Backup
3
-
-
STREET / EXTERNAL LIGHT FIXTURES AND POLES.
Galvanised Octagonal Poles - Design, engineering,manufacture, testing at factory, packing & forwarding,delivery to site, unloading and handling at site, assembly,installation, testing and commissioning of Octagonal street light poles with embeded junction box inclusive of terminals, 3Cx 2.5 sqmm PVC insulated multistranded flexible copper cable from Junction box to the luminaires, termination at both ends and other accessories. Foundation for the pole erection and all civil works shall be in the scope of the contractor.
410 SP-2 Swedged pole 7meter in length weight of pole 73 Kgs. (Add 10 Kg. weight of sleeve & base plate)
4
-
-
Single arm bracket
8
-
-
Post Top Lantern fitting suitable for 70W HPSV Lamp complete
wired with ballast and all accessories with 70W SV lamp
4
-
-
Street light fixtures with 70 W HPSV lamp (Integral type).
4
-
-
SOLAR STREET LIGHT WITH LED FIXTURES (SP-ME-TS-40)
LED type Solar street light fixtures with heat sink for LED,crystalline/ polycrystalline silicon solar PV modules,suitable size of maintenance free battery along with 5.5 mtr , 65mm dia GI pole with civil foundation, base plate, nut , bolts etc and all accessories required for completing installation as per specification.
SITC of 20 Watt LED Solar street light system wit 5 years warranty as per specification
1
-
-
Supply and laying Hume pipe -150mm Dia.
110
-
-
Pump and Pump Panel
Design, fabrication, assembly, supply, installation, testing & commissioning of Pump panel suitable for 415V, 3Ph. 4 wire system. Pump panel shall be wall mounted & shall be fabricated from 1.6mm thick CRCA sheet steel. Pump panel
shall be earthed with 8/10 swg earth wire. Colour shade shallbe RAL 7032 Siemens gray as per IS 5.
1
-
-
415V Pump panel with 63A MCCB as incomer with phase indicator and ammeter & voltmeter with selector switches, 2Noss. Of 25A MPCB with DOL Starter, local push button station & contactor of required rating as outgoing.
1
-
-
Submersible Pump set of:
1 H.P. single/ three phase electric motor Discharge: 90 lpm at 22 m head to 45 lpm at 52 m head Pump body: Cast ron,Impeller: Noryl, , Shaft SS410 Pump delivery diameter 32 mm
1
-
-
LANDSCAPE
-
-
-
Excavation for Planting of Tree on Soft Surface – Digging of Pit having size 1Mtr.x 1Mtr.x1Mtr. on soft surface like soil, Moorum.
21
-
-
Preperation of ground for planting of lawn/shrubs/ ground cover/ creeper/ climbers - Suply and Spreading of Red Hill Earth and Cow Dung Mannure in 2:1 Proportion up to 30 cm. Depth
( excluding cost of Lawn/shrubs/ ground cover/ creeper/ climbers .)
1587.29
-
-
Preperation of Pit and Planting of Tree In Escavated Pit Soft surface – Filling of Escavatied Pit having 1Mtr. X 1Mtr.X 1Mtr. Size with Escavated soil, Red Hill Earth and Cow Dung Mannure in 1:1:1 proportion and pant a tree with Stacking and preperation of Tree Basin for proper Irrigation. Excluding cost of Tree.
21
-
-
Maintenance of Newly planted Trees Including cost of water as directed by authority in-charge
21
-
-
Supply & installation of Bambusa Species 12 “ to 18 “ height excluding pollybag as directed by authority in-charge
2556
-
-
Supply & installation of Azadiracta indica Neem 10' to 12' height and 6 “ girth excluding pollybag as directed by authority in-charge
12
-
-
Supply & installation of Swetania mahogani Mahogani 10' to 12' height and 6 “ girth excluding pollybag as directed by authority in-charge
4
-
-
Supply & installation of Raphies palm as directed by authority in-charge
773
-
-
Supply & installation of Red Fountain grass as directed by authority in-charge
1707
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements