Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Military Engineer Services

  • Opening Date

    30 Apr 2019

  • Closing Date

    08 Oct 2019

  • Tender Amount

    ₹ 9,85,00,000

  • EMD

    ₹ 8,17,500

Are you Looking for Joint Venture Partners, Contractor Consortium, Project Financiers for this tender?
We will help YOU to find the right match for FREE!
Summary

Provision Of Deficient Civilian Accn Under Ge(i)(af) Shillong

Documents
Are you looking for Materials and Services for this tender?
We will help YOU to find the right partner for your needs for FREE!
BOQ Items
ItemQuantityUnitsRateAmount
... more
SCHEDULE "A" Part -I (BUILDING WORKS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.
-- -
... more
Construction of Married Accn of Type-I Qtrs RCC framed structure Five storied, complete all as specified and as shown on drawings.
2Each Block- -
... more
Construction of Married Accn of Type-II Qtrs RCC framed structure, Five storied, complete all as specified and as shown on drawings.
1Each Block- -
... more
Construction of Garage 'B' building RCC framed structure Single storied, scooter shed complete all as specified and as shown on drawings.
1Each Block- -
... more
Construction of Pump House building RCC framed structure Single storied, complete all as specified and as shown on drawings.
1Each Block- -
... more
SCHEDULE "A" PART-II (SITE CLEARENCE AND SITE DEVELOPMENT ) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION ) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY ) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-VIII (RETAINING WALL) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-IX (GARBAGE BIN) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-X (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-XI (EXTERNAL WATERSUPPLY) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-XII (LIFT) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART-XIII (DEMOLITION) Details of prepriced Schedule is given in tender documents
1Lump sum- -
... more
SCHEDULE "A" PART -XVI (MISCELANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.
-- -
... more
INTERNAL ELECTRIFICATION Supply and fixing flush type piano switch, single pole, 2 way 6A, 230 volts.
24Each- -
... more
Supply & fixing Digital LED energy meter current rated 5-30A single phase latest AISC and microcontroller based digital technology instantaneous start low power consumption less than 1 watt LED's indicator for curernt reversal tampering and phase availability temper proof design no frequent adjustments required no mechanical wear & tear. Meter works accurately under earth load calculation.
51Each- -
... more
Supply and fixing Modular Blanking plates 1 module blank. Legrand Cat No 573649 or equivalent of other makes as directed by E-inC'c Branch.
50Each- -
... more
Supply and fixing LED 12W with polycarbonate body and aluminium heat sink cool white C&S Cat No LTHPLEDLAMP9W/B22 or equivalent of Phillips/ Havells/ Bajaj.
331Each- -
... more
Supply and fixing for 300 mm sweep exhaust fan of 1400 rpm and connecting up including provision of cable from ceiling rose or connector to fan complete with louvers all as specified and as directed. Make- Usha/ Bajaj/ Havells
102Each- -
... more
Supply and fixing security light fittings, 20W, 230V powder coated pressure die cast aluminium compact high power with heat resistant toughened glass with suitable outer dia GI bracket, clamp, nut, bolt, etc completet with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 22/0.0076 all as specified and directed. Make- Crompton Cat No LST-20-CDL or equivalent of Bajaj/ CG/ Wipro/ Havells
46Each- -
... more
Supply and fixing LED light fitting, 20W, 230V indoor decorative aluminium extruded dimension 1205x66x76mm LED Battens integrated type, with bi-pin holders, connector block, etc complete with all accessories pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 22/ 0.0076 all as specified and directed. Make- Havells Cat No ENDURALINEARNEO BS20WLED865SPCWH or equivalent in Phillips/ Bajaj/ CG/ Wipro.
240Each- -
... more
Material & labour for factoy made sheet metal enclosure double door designed vertical TPN DB 12 Way DB, fixed on wall complete with copper bus bar, neutral link, dinrail suitable for mounting MCCB as incomer and MCB SPN/SP/TPN as outgoing complete all as specified. Make- Legrand Cat No 507759 or equivalent of other makes.
1Each- -
... more
Material & labour for factoy made sheet metal enclosure double door designed vertical TPN DB 6 Way DB, fixed on wall complete with copper bus bar, neutral link, dinrail suitable for mounting MCCB as incomer and MCB SPN/SP/TPN as outgoing complete all as specified. Make- Legrand Cat No 507741 or equivalent of other makes.
1Each- -
... more
Material & labour for factoy made sheet metal enclosure double door designed vertical TPN DB 4 Way DB, fixed on wall complete with copper bus bar, neutral link, dinrail suitable for mounting MCCB as incomer and MCB SPN/SP/TPN as outgoing complete all as specified. Make- Legrand Cat No 507740 or equivalent of other makes.
1Each- -
... more
Supply and fixing for MCCBs DPX3 4 Pole, 80 Amps, breaking capacity 16 KA adjustable type complete with cable connection with copper lugs all as specified and as directed. Make- Legrand Cat No 420014 or equivalent make of Havells/ L&T/Schneider.
1Each- -
... more
Supply and fixing for MCCBs DPX3 4 Pole, 250 Amps, breaking capacity 36 KA adjustable type complete with cable connection with copper lugs all as specified and as directed. Make- Legrand Cat No 420249 or equivalent make of Havells/ L&T/Schneider.
1Each- -
... more
Supply and fixing for MCCBs DPX3 4 Pole, 160 Amps, breaking capacity 36 KA adjustable type complete with cable connection with copper lugs all as specified and as directed. Make- Legrand Cat No 420097 or equivalent make of Havells/ L&T/Schneider.
1Each- -
... more
Supply & fixing MCBs (C-curve) SPN 32A, breaking capacity 10KA complete with cable connection with copper lugs all as specified and as directed. Make- Legrand cat No 408617 or equivalent make of Havells/L&T/Schneider.
42Each Set- -
... more
Supply & fixing MCBs (C-curve) SPN 10A, breaking capacity 10KA complete with cable connection with copper lugs all as specified and as directed. Make- Legrand cat No 408612 or equivalent make of Havells/L&T/Schneider.
1Each- -
... more
Supply & fixing MCBs (C-curve) SP 6 to 32A, breaking capacity 10KA complete with cable connection with copper lugs all as specified and as directed. Make- Legrand cat No 408612 or equivalent make of Havells/L&T/Schneider.
338Each- -
... more
Supply & Fixing 3 pin socket outlet point 15 Amps independent with cables of size 2.5 Sqmm multi-stranded PVC insulated unsheathed FR copper conductor connected to common earth dolly in and including PVC conduictmedium grade 20mm dia ISI marked ivory color including provn of sunken galvanized MS box not less than 1.12mm thick laminated hylum sheet top cover of required size all as specified.
100Per Point- -
... more
Supply and Fixing for water heater storage type vertical of capacity 25 Ltrs having 5 Star rating.
50Each- -
... more
Supply and fixing exhaust fan 300mm sweep 240 Volts AC with louvers including twin twisted flexible wire copper conductor cable all as specified and directed.
50Each- -
... more
INTERNAL WATER SUPPLY Supply & fixing brass bib taps cast copper CP high pressure with long shank and cup, capstan head screwed down 15 mm bore of pipe complete all as specified and as directed.
150Each- -
... more
Supply & fixing brass angle stop cock CP high pressure with long shank and cup, capstan head screwed down 15 mm bore of pipe complete all as specified and as directed.
150Each- -
... more
Supply & fixing brass concealed stop cock CP high pressure with long shank and cup, capstan head screwed down 15 mm bore of pipe complete all as specified and as directed.
50Each- -
... more
ROAD/ PATH/ CULVERT M & L for 200mm thick (spread thickness) granular sub nases with single or gravel in two layers of 100mm thick each over compacted sub grade formed and rolled and consolidated to required gradient and camber etc with 8 to 12 tonne power roller all as specified and as directed.
32Ten Sqm- -
... more
M & L for WMM 150mm thick (compacted thickness) in two layers each layer of 75mm thick with coarse aggregate granite or trap stone of grading 2 (using granite ballast trap) (63mm to 40mm size) and second layer of 75mm compacted thickness to be provided with grading 3 (50mm to 20mm) spreadrolled and consolidated to required gradient and camber complete all as specified and as directed.
32Ten Sqm- -
... more
SEWAGE DISPOSAL Material & labour for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design mix in walls, base slabs, baffle walls and roof slabs including beams etc with vent shaft, manhole openings with cover connection etc, complete with effective depth of 1.5m and overall depth of 3m for 100 users.
2Each- -
... more
Material & labour for Soakage wells exc, in ordanary soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concrete including intercepting chambers and screen chamber made of brick work in CM, RCC cover slab in M-25/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with brick bats of size 1.8m dia and 4.5m deep.
2Each- -
... more
EXTERNAL ELECTRIFICATION Supply & fixing street light luminaries LED 60W including connection etc. all as specified and directed complete . Make : Crompton Cat No. LSTO-60-CDL or equivalent.
10Each- -
... more
M&L halogen free weather proof IP-66 cable junction box of size 200x160x198 mm for outdoor installations with terminals set of 10 Sqmm 4 Pole 01 mounting bracket and polyamide cable gland with lock nut (Type-KF-PV-0500) and making provision of an MCB SPN including internal connection by proper sizes copper/aluminium lugs/thimble all as specified and directed.
10Each- -
... more
M&L for construction of PCC platform of size 2500x2500x1200mm height above ground level, 150mm thick PCC 1:3:6 type C2 in foundation 230mm thick brick walls on four sides, earth filling coping with PCC type B1, for installation of transformer with brick, steps of one side, PVC coated chain link cattle upto 1.0 mtr height above ground level erected around complete platform should have hinged door 3.5 mtr wide and locking arrangement from step side and coats of aluminium paint over a coat of red oxide primer.
1Each Job- -
... more
Material & labour for electrical earthing with GI Plate electrode of size 60 cm x 6.3 mm thick buried directly in ground vertically earth pit not less than 2.5 mtr deep below ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI strip earth lead of size 35 x 6mm by means of bolts, nuts, washers made of galvanised iron and connected main control board/switch gear/panel boards all as specified and shown in electrical Plate no. 3 of MES Schedule (SSR) Part-I 2009 including necessary excavation and earth work in any type of soil, charcoal, dust, salt and PCC 1:2:4 type B1 in chamber RCC 1:2:4 type B1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways and with 6mm dia MS hook complete and testing resistance all as specified and as directed.
8Each- -
... more
Supply, install, testing, commissioning, LT feeder pillar box outdoor type vermin/weather proof of over all dimensions (1500x1000x600) mm (leg of the feeder pillar not less than 300 mm in length) made out of 3.0 mm thick CRCA sheet supported on structural frame of angle iron (50x50x6) mm incl canopy type roof 10 cm extended in all sides and two part hinged door in front side with locking and gasket arrangement (incl one Pad lock of 7 lever with 03 keys) duly two coats of powder coated paint internally/externally on the surface incl provn of 04 Nos Aluminium Bus bar strip of rating 900 Amp (covered with PVC insulated sleeves) fixed on PVC insulators and internal connections with required rating of copper cable and terminals, grounting on PCC foundation as per site requirement as directed by Engr-in-Charge. The FP box consisting the following accessories: Main Incoming : (i) MCCB 630 Amp, 4 Pole , 35 KA-1 No Main Outgoing : (ii) MCCB 200 Amp, 4 Pole, 25 KA-02 nos (iii) MCCB 100 amps 16 KA-01 No (iv) MCCB 25 Amp 4 Pole, 16 KA – 03 nos (v)Timer switch -01 No
1Each Job- -
... more
Materials and labour for GI pipe light grade 40mm bore 1.5m in length to be bent in shape for fixing with wall incl fixing arrangement with 32x6mm MS clamp incl nuts, bolts, washers or anchor fastners (Min two clamps per bracket for fixing will be used) complete all as specified and as directed (1.5m x10=15m)
10Each Set- -
... more
EXTERNAL WATER SUPPLY S&F cast iron sluice valve 80 mm bore heavy duty flanged ends conforming to IS-14846-2000, PN 1.6 long body with all jointing materials such as leather gaskets, nuts bolts washer etc. complete all as specified and as directed. Make : Kirloskar/Venus/Upadhyay/Zoloto
1Each - -
... more
M&L for construction of brick masonry valve pit of size 90x90x90 cm (Internal dimensions) one brick thick wall in cm 1:4 amd 100 mm thick pcc 1:4:8 in foundation and 15 mm thick plastering. Providing valve pit cover made of 3 mm thick MS sheet/plate welded with 40X40X6 mm angle iron frame fixed on top of valve pit by means of hold fasts 150mm long, embedded in PCC 1:2:4 type B1, brick of size 230x110x75mm inlcuding two coat of red oxide primer and necessary earth work in soft/loose soil complete all as specified and as directed.
1Each- -
... more
S & F reflux valve PN 1.0 with bypass arrangement supplied and installed complete of size 50mm dia.
2Each- -
... more
Supply, installation, testing and commissioning of centrifugal type monoblock Pumping sets consisting of and incuding the following:- Pump shall have TEFC 2900 RPM electric motor, pressure gauge on delivery line with gunmetal isolation cock suitable vibration elimination pads of approved design., S.S shaft fitted with mechanical seal directly coupled with totally enclosed fan cooled induction motor. Including motor starter and PCC foundation. Each pump shall be suitable for 415+ 10% volts 3 Phase 50 HZ A.C. supply and shall be having the flow rate of 575 LPM, head 25 mtr and motor 5 HP. Suction x delivery shall be 80 x 65mm Class ‘B’ insulation IP-44.
2Each- -
... more
Materials & labour for electrical earthing with GI Plate electrode of sie 60 cm x 60 cm x 6.3mm thick buried directly in ground vertically earth pit not less than 2.5 mtr deep below ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI strip earth lead of size 35 x 6 mm by means of bolts, nuts, washers made of galvanised iron and connected main control board/switch gear/panel boards all as specified and shown in electrical Plate No. 3 of MES schedule (SSSR) Part-I 2009 including necessary excavation and earth work in any type of soil, charcoal dust, salt and PCC 1:2:4 type b1 in chamber RCC 1:2:4 type B1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways and with 6 mm dia MS hook complete and testing resistance all as specified and as directed.
4Each- -
... more
S& F foot valve conforming to IS-4038 PN 1.2 supplied and installed complete of size 50mm bore all as specified.
2Each- -
... more
LIFTS Material & labour for Electrical Earthing with GI Plate electrode of size 60 cm x 60 cm x 6.3mm thick buried directly in ground vertically earth pit not less than 2.5 mtr deep below normal ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI strip earth lead of size 35 x 6mm by means of bolts, nuts, washers made of galvanised iron and connected main control board/switch gear/panel boards all as specified and shown in electrical plate no.3 of MES schedule (SSR) Part-I, 2009 including necessary excavation and earth work in any type of soilo, charcoal,, dust, salt and PCC 1:2:4 type B1 in chamber RCC 1:2:4 type B1 cover slab with 6 mm dia mild steel bars at 100 mm center to center both ways and with 6 mm dia MS hook complete and testing resistance all as specified and as directed.
6Each- -
... more
DG SET Supply , install, connecting, testing and commissioning Diesel Engine driven Generating set, water cooled type , Acoustic proof, comrising diesel engine, alternator, cold starting unit, AC 415 Volts ,50 HZ, 3 phase 4 wire, 30 KVA capacity coupled to Engine insatalled/fixed on common base plate with anti vibration pads /fiction pads and comprising. (a) Automatic Mains Failure (AMF) panel with all accessories/system for auto start in case of mains failure and auto stop when main supply resorted and bypass arrangement with necessary measuring/indicating instrument & accessories. (b) Battery charger of suitable capacity for charging the batteries suitable for operation on AC single phase 230 Volts 50 Hz. (c) Battery of suitable capacity and Nos with copper flexible PVC insulated cables and terminals. (d) Initial filling of engine oil to the required level/standard. (e) Fuel tank capacity not less than 100 ltrs with initial filling of diesel oil of required quantity for testing the DG set. (f) Digital type Meter for reading volts, amps, frequency, RPM, hours run, KWH etc. (g) Engine safety unit indicator for supply ON. Low, LOP, battery removed, high temperature, fuse open, 'V' Belt failed, charge auxiliary trip/emergency stp, stop sloenoid ON etc. (h) Pressure gauge 0-10 bar pressure gauge, ammeter 50-0-50 indicator lamp for set ON, load ON, start switch, key type ON/Off control.
1Each Job- -
... more
Note:- (i) Electrical load test on alternator shall be carried out at site and all arrangement to carry out the load test as per particular specification shall be made by the contractor. (ii) Diesel oil for testing of DG set shall be deemed included in the rate quoted. (iii) Training to department staff shall be given. (iv) Acoustics proof enclosure shall conform to Central Pollution Control Board (CPCB) norms and shall be carried out by authorized manufacturers and certificate tom this effect shall be submitted. (v) Operation and maintenance manual and test certificate for Engine, Alternator and Acoustics Proof enclosure. (vi) Rate quoted shall be deemed to have been inclusive.
-- -
... more
Material and labour for electrical earthing with GI plate electrode of size 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically earth pit not less than 2.5 mtr deep below ground level with the top edge of the earth plate at a depth not less 1.5 mtr below normal ground level connected to GI strip earth lead of size 35 x 6 mm by means of bolts, nuts, washers made of galvanised iron and connected main control boards/switch gear/panel boards all as specified (SSR) Part-I 2009 including necessary excavation and earth work in any type of soil, charcoal, dust, slat and PCC 1:2:4 type B1 in chamber RCC 1:2:4 type B1 coverl slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways and with 6 mm dia MS hook complete and testing resistance all as specified and as directed.
4Each- -
... more
Note: Schedule of Credit (SCHEDULE "A" PART-XV) amount of Rs 2200.00 mentioned on Page No 65 shall be deducted from the total quoted amount of BOQ.
-- -

CA NO CE(AF)SZ/ SHL/ OF 2019 2020 Serial Page No 07 MILITARY ENGINEER SERVICES NOTICE INVITING TENDER (NIT) 1. A TENDER IS INVITED FOR THE WORK AS MENTIONED IN Appendix ‘A’ to this (NOTICE INVITING TENDER (NIT)) 2. The work is estimated to cost as indicated in aforesaid Appendix ‘A’. This estimate, however, is not a guarantee and is merely given as rough guide and if the work cost more or less, a tenderer/bidder will have no claim on that account. The tender shall be based on as mentioned in aforesaid Appendix ‘A’. 3. The work to be completed within the period as indicated in aforesaid Appendix ‘A’ in accordance with the phasing, if any, indicated in the tender from the date of handing over site, which will be on or about two weeks after the date of Acceptance of tender. 4. Normally, contractors whose names are on the MES approved list and within whose financial limit/class the estimated amount would fall, may tender/bid (in case of term contracts, contractors of class SS to E may tender/bid). 5. In case, the tender submitted by enlisted as well as unenlistedcontractor is accepted, the contractor will be required to lodge ‘Performance Security Deposit’ for an amount equivalent to 5% of the Contract Sum/lumpsum in favour of the Accepting Officer within 28 (Twenty Eight) days of the receipt by the contractor of notification of acceptance of his tender/bid in the form of‘Bank Guarantee’ or FDR. Failure of the contractor to comply with the requirements of Performance Security, shall constitute sufficient grounds for cancellation of the award of work and forfeiture of the Earnest Money. In case of MES enlisted contractor, amount equal to the Earnest Money stipulated in the Notice Inviting Tender, shall be notified to the tenderer for depositing the amount through MRO. Issue of tender to such tenderers shall remain suspended till the aforesaid amount equal to the Earnest Money is deposited in Government Treasury. (See Condition 19 of General Conditions of Contract (IAFW-2249)). 6. Not more than one tender/bid shall be submitted/uploaded by one contractor or one firm of contractors. Under no circumstances will a father and his son(s) or other close relations who have business dealing with one another be allowed to tender/bid for the same contract as separate competitors. A breach of this condition will render the tenders/bids of both the parties liable for rejection. 7. The office of HQ CHIEF ENGINEER (AF), SHILLONG ZONE, MILITARY ENGINEER SERVICES, ELEPHANT FALLS CAMP, PO : NONGLYER, SHILLONG – 793009will be the Accepting Officer here-in-after referred to as such for purpose of the contract. CA NO CE(AF)SZ/ SHL/ OF 2019 2020 Serial Page No 08 8. The Technical Bid and Financial (Cover-1 and Cover-2) shall be uploaded by the tenderer/bidder on or before the date & time mentioned in NIT. A scanned copy of DD with enlistment details/documents shall be uploaded as packet 1/cover-1 (‘T’ bid) of the tender/bid on e-tendering portal. DD is refundable in case T bid is not accepted resulting in non-opening of ‘Q’ bid. The applicant contractor shall bear the cost of bank charges for procuring and encashing the DD and shall not have any claim from Government whatsoever on this account. (a) Tender form and conditions of contract and other necessary documents shall be available on defproc.gov.in site for download and shall form part of contract agreement in case the tender/bid is accepted. (b) In case of contractor who has not executed the Standing Security Bond, the Cover –I shall be accompanied with by Earnest money of amount as mentioned as Appendix ‘A’ in the form of deposit at call receipt in favour of concerned GE (see Appendix ‘A’) by a scheduled Bank or in receipted treasury challan the amount being credited to the revenue

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.