Border Security Force Tender

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Providing and fixing of 01-seater portable toilet of dimension 915 mm x 915 mm x 1980 mm which includes Indian type ceramic WC pan with PTMT push cock and 10 ltr low level PVC flushing cistern, ceramic washbasin with PTMT pillar cock inside the cabin. Water supply by means of overhead PVC water storage tank capacity 200 ltr and sludge tank capacity 200 ltr with 75 mm outlet facility through butterfly valve and hose pipe, slanting/tapper roof with 100 mm projection on all the four sides including installation and commissioning, plumbing and sanitary fitting connection. Provision of suitable ventilation and lightening arrangement. The bottom frame of cabin should be 35x35x5 mm thick MS angle with bottom support material 25 x25 x3 mm thick M S angle, side panel frame material 35 mm x35 mm x5 mm thick M S angle, Top (roof frame material 35 mm x35 mm x 5 mm thick M S angle, top roof support frame 25 mm x25 mm x 3 mm thick M S angle, ventilation frame material 25 mm x 3 mm thick M S flat, door frame material 35 mm x35 mm x 5 mm thick M S angle, support material for door panel fixing SS U-channel of 18 gauge, 03 nos. door hinges 75 mm size with 1.2 -1.5 mm thickness, tank holder frame 25 mm x 3 mm thick M S flat, unit under structure supported by 04 legs of size 35 mm x35 mm x 5 mm thick M S angle with corner support of 25 mm x25 mm x 3 mm thick MS angle and door Tee material 40 mm x 40 mm x5 mm thick MS Tee. Side panel material single layer 5 mm thick FRP, Top (roof) panel material 5 mm thick ply core/ cement fiber board sandwich with 01 mm thick FRP from both sides, door panel material single layer 5 mm thick FRP, floor material 5 mm thick FRP. Door size 585mm x 1830 mm with 100 mm size MS door locking bolt with 75 mm size SS tower bolt from inside, looking mirror plastic frame 455 mm x 305 mm, PTMT soap dish, provision of vent pipe from digester tank, provision of ventilation for 01 Nos PVC exhaust fan of size 300x300 mm and providing warranty for 1 year complete including transportation to Border Out Post, loading, unloading, Packaging etc. as per direction of Engineer-in-charge.