Rural Development Department Tender

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.PWD SSR 2022-23 item no 32.04 page no 153

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete SSR 2022-23 Item No 32.11

Providing and applying colour-wash of approved colour and shade in two coats to new surface including scaffolding, brushing and brooming down (excluding base coat of white- wash) etc. complete.SSR Item No 36.05

Total number Of Compost Tank For Solid 1+1

B.Public Waste Water Leach PIT Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.MJP DSR 2022-23 item no 21.05 page no115

Providing and Laying Cast in Situ/Ready Mix cement concrete in M-10 of trap /granite/quartzite/gneiss metal for foundation and bedding including bailing out water ,steel centering ,formwork,laying/pumping compacting ,roughening them if special finish is to be provided ,finishing if required and curing complete,with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer /concrete batch mix plant (pan mixer) etc.complete with fine aggregate (natural sand/crushed sand VSI grade finely washed etc) MJP DSR 2022-23 item no 24.01 a page no 131

Providing second class Burnt Brick masonary with conventional /I.S type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water manually,striking joints on unexposed faces, raking out joints on exposed faces and watering etc .complete MJP DSR 2022-23 item no27.03 a page no 144

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.PWD DSR 2022-23 item no 32.04 page no 153

Providing And Fixing in position steel fibre reinforced concrete (S.F.R.C) Frame and Covers of approved make includind loading,aunloading,Transpotation,aal taxes,etc complete as directed bt Engineer in Charge (20 tonnes capacity) (540 mm dia)(90 x 45 cm size) SSR Item No 17(a,c)

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). (for electrical work casing pipeline) 160 mm, Working Pressure 10 Kg. / Sq.cm MJP/DSR/2021-22L.No.2031 1)110 mm 6 kg

2) 75 MM 6 Kg

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).MJP/DSR/2021-22 item No 4 Page No. 80 1) 110 MM 6 Kg

2) 75 MM 6 Kg

Number Of Public Waste Water Leach PIT Tanks 1 +4

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge SSR Item No 6.36