Rural Development Department Tender

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compactingthesubgrade/gravel /sizemetal(100 mm loose) layers for al lwidths with Power roller havingweight 8 to10MT. including necessary, labour,materials and artificial watering complete.

Providing and constructing 50mm. thick Modified Penetration Macadam (MPM) road surface including all materials,preparing the existing road surface,spreading 40mm.stone layers metal 100% crusher broken metal with conical crusher palnt ,heating and spraying the bitumen of specified grade @1.75kg /sqm, spreading 12mm. size chips compacting with Static roller having weight 8 to10 MT.to achive the desired degree of compaction as perTechnical Specification Clause 506 etc.complete, i. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and constructing 50mm. thick Modified Penetration Macadam (MPM) road surface including all materials,preparing the existing road surface,spreading 40mm.stone layers metal 100% crusher broken metal with conical crusher palnt ,heating and spraying the bitumen of specified grade @1.75kg /sqm, spreading 12mm. size chips compacting with Static roller having weight 8 to10 MT.to achive the desired degree of compaction as perTechnical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30Kg Sqm.on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and laying Premix bituminous carpet 7°mm thick VG-4° grade Providing 20 mm thick premix bituminous carpet including supplying all materials, preparing and cleaning the ase, heating bitumen applying tack coat at specified rate, Mix hot bitumen and chips, laying the carpet layer and compa ihg etc. complete. By Bulk Asphalt. (excluding Tack coat). ( q}Q-. Mix with prior approval)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all material sand bitumen of specified grade preparing existing road surface,heating and applying bitumen @0.98 Kg Sqm.by mechanical means, spreading chip sand rolling,by static roller having weight 8 to10MT. etc. complete. (VG-30bulkbitumenrates are considered to arrive at rates)

Excavationfor roadway in earth, soilofall sorts, sand, gravelor soft murum including dressing section to the required grade, camber and side slopes and conveying the excavatedmaterialswithall lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600 mm diameter in proper line, level and slope etc. complete.

Providing and fixing N.H./S.H.Route Marker size 60cm x 45cm with one No.direction plate of size 30cm x 25cm prepared on 16 gauge M.S.sheet including painting with one coat of zinc cromates to ving primer and two coats each of white and green background and back side gray stove enamelled, bondedwithcut out of red Retro reflective sheet Engineering grade,border/ letters /numerals and arrow,coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of M.S .Angle iron pos tof size 50 x 50 x 5mm of 3.65 m. long in flated at bottom drilled on topin one piece without joint painted with white and black bands of 30cm. fixing board and post with 4Nos. of high strength G.I.bolt sand nuts of size 10mm dia.and 20mm long including all taxes,conveying, fixing in ground with cement concrete 1:4:8block of 60cm x 60cm x75cm size as directed by Engineer-in-charge etc .complete. Mild Steel Route Marker with Engineering Grade

Test Reports - for Bitumen , Aggregate

Royalty