Rural Development Department Tender

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. SSR 2022-23 P.No. 281 Item Code 35.14

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR 2022-23 P.No. 371 Item Code 46.19

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 2022-23 P.No. 217 Item Code 24.01

Providing and laying POLISHED SHAHABAD STONE Flooring 25 to 30 mm thick &30 cm wide requried width in plain and diamaind pattren on a bed of 1:6 cm including cement float filling joints with neat cement slurry pointing in cement mortor in 1:3 curing ,polishing and cleaning etc. complete.(SPEC NO.BDM.3.A.PAGE NO.380)SSR P NO.275 / I NO.33.04

Providing and fabricating structural steel work in tubular/rectangular/hollow steel structure of standard size as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coats of oil paintings of approved quality and shade complete. SSR Item No. : 23.04 BD.C.8 Page No. 214

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre)SSR Item No. : 38.34 BD.R.5 Page No. 303

Rain Water Harvesting

Royalty Charges

Add 1% Labour Insurance/Cess

Add Testing of Materials

GST 18%