Rural Development Department Tender

ITEM NO 4. Supplying soft murum at the road site, including conveying and stacking complete.

ITEM NO.5 Spreading hard murum/soft murrum/gravel or kankar for side width complete

ITEM.NO.6Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.

ITEM.NO.7 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller, to the required density. By Mechanical Means - Grading I (Using Screening

ITEM.NO.8 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller, to the required density. By Mechanical Means-Grading II (Using Screening Type B (11.2 mm) Aggregate)

ITEM.NO.9 Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm, stone metal layers 100% crusher broken metal with concical crusher plant heating and spraying the bitumen of specied grade 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking rates are considered to arrive at rates) of existing WBM surface. (VG-30 bulk

ITEM.NO.10 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.50kg/10 sqm.VG-30 bulk bitumen

ITEM.NO.11 Open Graded ng- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to Premix Surfacing- aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, 5.6 mm finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime/ tack coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)

ITEM.NO.12.Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.

ITEM.NO.13.Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retorefictive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint & supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete. The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade MORTH 801

Royalty Charges For Minerals

ADD GST 18%

Sieve Analysis

Extraction Test Bituminous

Sieve Analysis

ADD LABOUR INS 1%

Add.1% SQM