Rural Development Department Tender

Item No.4 :- Supplying 60 trap stone metal of required size by bringing the boulders/Rubble at the road side breaking them to required gradation including conveying the boulders/Rubble and stacking the broken metal etc. complete. (Prior approval of sample stack of broken metal by the Ex.Engineer is necessary the date of approval will form part of the measurements) a) 40 mm Metal, By breaking Boulders (Hand broken).

Item No. 5 :- Supplying Soft Murum at the Road Site including Conveying & Staking etc. complete.

Item No.6:- Spreading 80 / 40 mm Metal for Road Work including Sectioning etc. complete as Directed by Engineer In Charge

Item No. 7 :- Spreading Soft Murum for Side Width etc. complete.

Item No. 8 :- Compacting the Sub Grade / Gravel / Size Metal (200 mm Loose) Layers for All Widths with Power Roller having Weight 8 to 10 M. T. including Necessary Labour, Materials & Artificial Watering complete.

Item No.9:- Compacting the Sub Grade / Gravel / Size Metal (100 mm Loose) Layers for All Widths with Power Roller having Weight 8 to 10 M. T. including Necessary Labour, Materials & Artificial Watering complete.

Item No.10 -Providing & applying water proof treatment etc.complete.

Item No. 11 :- Providing 20 mm thick premix bituminous carpet V.G. 30 grade including supplying all materials, prepaing & cleaning the base, heating bitumen applying tack coat at specified rate, mixing hot bitumen & chips, laying the carpet layer & compacting etc. complete (Including the cost of tack coat) By Bulk Asphalt.60/70 Grade

Item No. 12- Providing bituminous Liquid seal coat to B. T. surface icluding, supplying all materials with all leads, preparing existing road surface, heating & applying bitumen, spreading chips, rolling complete. (By using Bulk Asphalt.)

Item No. 13 :- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mm x 35mm x 3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.

Item No. 14 :-QUALITY CONTROL MATERIAL TESTING CHARGES (SUB. EST. )

Trap Metal

1) Water Absorption, Specific Gravity, Impact Value, Crushing Value etc. Group Test

2)Sieve Analysis Test

Asphalt

1) Penetration Softing point,Flash& Fire Point,Specific Gravityetc. group test

2) Penetration Softing point,Flash& Fire Point,Specific Gravityetc. group test

Item No. 15 :-ROYALTY CHARGES OF MATERIAL

1) Trap Metal for W.B.M.