Rural Development Department Tender

ITEM NO:3 Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, Steel centering, formwork,laying/pumping, compacting, roughening them if special finish isto be provided, finishing if required and curing complete, withfully automatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) (NonSCADA ltem)

Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C work in foundations like raft, strip foundations, grillage and footings of RCC columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item)

ITEM NO 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 13 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc complete With fine aggregate Crushed sand VSI Grade) (Concrete Non Scada)

ITEM NO: 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item)

ITEM NO:7 Providing and laying Cast in situ/Ready Mix cement concrete M-20of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs andlandings as per detailed designs and drawings including steelcentering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar l:3 of sufficientminimum thickness to give a smooth and even surface orroughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structural steel).with fullyautomatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)(NonSCADA Item)

ITEM NO:8 Providing and laying Cast in situ/Ready Mixcement concrete M-20of trap/ granite/ quartzite/ gneiss metal for R.C.C. chaja as perdetailed design and drawings including steel centering, formwork,cover blocks, laying/pumping, compacting and roughening thesurface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fullyautomatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Crushed sand VSiGrade)(Concrete Non Scada)

ITEM NO:9 Providing and fixing in position TMT - FE500 bar reinforcementof various diameters for R.C.C. pile caps, footings, foundations,slabs, beams columns, canopies, staircase, newels, chajas, lintelspardis, copings, fins, arches etc. as per detailed designs, drawingsand schedules. including cutting, bending, hooking the bars,binding with wires or tack welding and supporting as requiredcomplete.

ITEM NO: 10 Providing second class Burnt Brick masonry with conventional/ 1.S.type bricks in cement mortar 1:6 in foundations and plinth ofinner walls/ in plinth external walls including bailing out watermanually, striking joints on unexposed faces, raking out joints onexposed faces and watering etc. Complete

ITEM NO: 11 Filling in plinth and floors with approved excavated material in15cm. to 20cm. Layers including watering and compacting etc.complete.

ITEM NO: 12 Filling in plinth and floors with contractors material/brought fromoutside and approved by Engineer incharge in layers of 15 cm to20 cm including watering and compaction etc. complete.

ITEM NO: 13 Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in superstructure includingstriking joints, raking out joints, watering and scaffolding etc.Complete

ITEM NO: 14 Providing water proof bedding for flooring of Bath and WC 25 mmthick in C.M. 1:3 including using approved water proofingcompound in specified proportion as per manufacturersspecifications for per bag of cement including leveling, curing andcovering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test etc. complete

ITEM NO: 15 Qua Providing internal cement plaster 6 mm thick in a single coat incement mortar 1:4 without neeru finish to concrete surface in allpositions including scaffolding and curing etc. complete.(SSR Item No: 32.01 ) (PWD-CIVIL SSR ) Item Spec: ( Bd.L.1 PageOne Number 367 )RA No. :3

ITEM NO: 16 Providing internal cement plaster 12mm thick in single coat incement mortar 1:4 without neeru finish to concrete or brickSurfaces, in all positions including scaffolding and curing etc.complete.

ITEM NO:17 Providing sand faced plaster externally in cement mortar usingapproved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 uSing waterproofing compound at1Kilogramper cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receivethe sand faced treatment 6 to 8 mm thick in cement mortar l:4finishing the surface by taking out grains and curing for fourteendays scaffolding etc.complete

ITEM NO: 18 Providing neeru finish to plastered surfaces in all positionsincluding scaffolding and curing etc. complete.

ITEM NO: 19 Providing and laying vitrified mirror / glossy finish tiles decorativetype having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thickness and confirming to IS. 15622-2006 ( group Bla) ofapproved make, shade and pattern for flooring in requiredposition laid on a bed of 1:4 cement mortar including neat cementfloat, filling joints, curing and clearing etc. complete.

ITEM NO : 20 Providing and laying vitrified mirror / glossy finish tiles having size590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mmthickness and confirming to IS. 15622-2006 ( group Bla) ofapproved make, shade and pattern for dado and skirting inrequired position fixed in l:4 cement mortar including neatcement float, filling joints, curing and clearing etc. complete( SSR Item No: 33.41 ) (PWD-CIVIL SSR ) Item Spec: ( Bd.M. 12Page One Number385 )RA No. :7

ITEM NO :21 Providing and laying telephone black / Amba White /Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20mm thick for door frame/ dado/ window boxing etc. On C.M. l:6including filling joints with polymer base filler nosing/moulding thesharp edges wherever necessary, curing, etc. complete

ITEM NO 22 Providing and fixingsolid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detaileddrawings approved face veneers 3 mm thick on both faces or asdirected, all necessary beads, mouldings and lipping, wrought ironhold fasts, chromium plated fixtures and fastenings, with brassmortise lock, chromium plated handles on both sides, andfinishing with French Polish etc. conmplete.

ITEM NO: 23 Providing and fixing in position (as per 1868 | 1982) Aluminiumsliding window of three tracks with rectangular pipe 95 x 38.10 x0.90 mm at weight 0.637 Kilogram/One Running Metre., withwindow frame bottom track section 92 x 31.75 x 1.30 mm atweight 1.070 Kilogram/One Running Metre.. Top and side tracksection 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre. The shutter should be of bearing bottom 40 x 18 x 1.25mm at weight 0.417 Kilogram/One Running Metre. Inter lockingsection 40 x 18 x 1.10 nmm at weight 0.469 Kilogram/Runningmetre. and handle and top section 40 x 18 x 1.25 mm at weight0.417 Kilogram/Running metre. As per detailed drawings and asdirected by Engineerincharge with all necessary Aluminiumsections fixtures and fastenings such as roller bearing in nyloncasting and self locking catch fitted in vertical section of shutterincluding 5 mm thick plain glass and aluminium mosquito netshutter with stainless steel jail with all required screws and nutsetc, complete. With powder coating without boX.

ITEM NO: 24 Providing and fixing cold rolled steel hollow door frame 105mm x60mm for anysizes including hold fast hinges, tie members withred oxide and gray paint etc. complete as per I.S.I. specificationsand code of practice prescribed including anticorrosive treatmentas directed by the engineer.

ITEM NO: 25 Providing and fixing mild steel grill work for windows, ventilators,etc. 15 Kilogram/ One Square Metre as per drawing includingfixtures necessary welding and painting with one coat ofanticorrosive paint and two coats of oil painting complete.( SSR Item No : 40,02 ) (PWD-CIVIL SSR ) Item Spec : ( Bd.U.1Page One Number 537 )

ITEM NO : 26 Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding ifnecessary, preparing the surface by thoroughly cleaning oil,grease, dirt and other foreign matter and sand papering asequired etc. complete.

ITEM NO:27 ) Providing and applying washable oil-bound distemper of approvedcolour and shade to old and new surfaces in two coats includingScaffolding, preparing the surfaces. (excluding the primer coat.)etc. complete.

ITEM NO: 28 Providing and fixing board displaying information, such as 'Nameof work, Tender cost, Name of Contractor, Work completion andliability period etc', having rectangular shape of 1.20m x 0.90msize made out 18 gauge (1.25mm) thick mild steel sheet paintedwith one coat of Zinc chromate stoving primer and two coats ofenamel paint on front side and grey stove enamel on back sideand border / messages / symbols etc. with approved colour shadepaint complete, on M.S.angle of size 35 x 35 x 3 mm frame withproperly cross braced M.S. angles of size 35mmx35mmx3 mmduly painted including Two M.S. angle iron posts of size 65 mm x65 mm x 6 mm, 3.65 m long painted with alternate black andwhite bands of 25 cm width including all fixtures etc.and fixingthe boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cmincluding, excavation, refilling, transportation, and labOur etccomplete

2.Name of Sub Work -- Royalty ITEM NO:1 Royalty For Natural Sand - Screened (for plaster workonly)

ITEM NO:2 Royalty For Soft Murum