Military Engineer Services Tender

Material and Labour for applying 3mm thick wall care putty in two layers on wall complete all as specified and directed.

Material and Labour for Preparing old plastered or unplastered surfaces and applying one coat of white wash on wall surfaces complete all as specified and as directed

All as per item No 5 above but two coat of white wash on wall surface complete all as specified and as directed.

Material and Labour for Preparing old surfaces and applying one coat of white wash on ceiling surface completel all as specified.

All as per item No 7 above but two coats of white wash on ceiling surface complete all as specified and as directed.

Material and Labour for preparation of old painted steel surfaces & applying one coat of synthetic enamel paint on steel surface of any description over 10 cm in width or girth complete all as specified and as directed.

All as per item No 9 above but two coats synthetic enamel paint on steel surfaces complete all as specified and as directed

Material and Labour for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per item No 11 above but two coats synthetic enamel paint on wooden surfaces complete all as specified and as directed

Material and Labour for french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing old wooden surface over a coat of wood filler on wooden surface with three coat of french polishing complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed

Material and Labour for applying one coat of plastic emulsion paint on wall including preparation of old decorated wall surfaces complete all as specified and as directed.

Material and Labour for complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for preperation of old decorated wall surface and applying one coat of weather proof anti fungal exterior emulsion paint at any height including necessary scaffolding etc complete all as specified and directed.

Material and labour for complete removal of existing treatment including fascias,cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste of Asian Paints or equivalent make and make good smoothen surface by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. Allow 6-8 hrs to dry the surface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed Make: Asian Paints apex Ultima Protect/Nerolac excel top Guard/Berger Weather coat long life

Material and labour for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make: Asian Paints Apex Ultima Protect/Nerolac excel top Guard/Berger Weather coat long life Notes for smart periodicals item no 18 & 19: (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The MoU between tenderer andmanufacturer of paints and their authorized applicator shall be submitted by the contractor alongwith performance security of tender. (c) Cost of scaffolding at any height shall be included in thequoted rate. (d) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartion of surface written approval shall be obtained from GE before applying primer and further treatment/coats. Bldg wise stage passing register shall be maintained (e) Finishes ie cement based paint, acrylic water based exterior grade primer,premium acrylic smooth exterior emulsion etc to walls, ceiling, chajjas, fins, fascias, parabets etc shall be applied using airlessspray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of a reputed manufacturer with pro-guard technology and capability of tracking pressur as well as paint and primer usage (f) This equipment shall be certified by approved manufacturer. (g) The accessories for applying the finishes shall be spray in hard to reach areas and penetration of finishes on the surface so asto achieve uniform application and quality surface finish. (h) The contractor shall submit approved company generated 05 yrs warranty card at the time of submission of Final bill.

Material and Labour for preparing old painted concrete/plastered surfaces and appliying two coats of synthetic enamel paint complete all as specified and directed.

Material and Labour for preparation of old treated surfaces of wall and applying one coat of fire resistant paint complete all as specified and as directed by Engr.- in- Charge.

Material and Labour for complete removal of exisiting treatment of any type and applying two coat of fire resistant paint over a coat of primer on wall surfaces complete all as specified and as directed by Engr.- in- Charge.

All as per item No. 22 above but on ceiling surfaces.

Alll as per item No. 22 above but on steel surfaces.

Material and Labour for writing letters or figures ( Block, Roman, Italic or Indian) Not-exceeding 30 cm height complete all as specified and directed by Engr.- in- Charge.

Material and Labour for Writing Stops, commas, short lines, dashes, hyphens, brackets etc. complete all as (Per CM of height ) specified and as directed by Engr.- in- Charge.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and Labour for plastering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed.

Material and Labour for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of primer including applying 3mm thick wall care putty complete all as specified and directed.

Material and Labour for plastering 15mm thick in two layers with 10mm thick in CM 1:6 on of fair faces of brick masonry or on concrete surfaces and 5mm thick in CM 1:6 with water proofing compound Note: WPC shall be measured @ 0.20 Ltr per 50 kg of cement and paid seperately complete all as specified and as directed.

Material and Labour for 5mm thick cement plaster on cement concrete surface as in ceiling in CM 1:3 complete all as specified and as directed.

Material and Labour for preparation of newly plastered celling and applying two coats of white wash complete all as specified and as directed

Material and Labour for preparation of newly plasteresd surfaces of ceiling and applying two coat of oil bound distemper complete all as specified and as directed

Supply only liquid water proofing compound.

Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, of any dia of pipe in any position with wall or in floor etc complete all as specified and as directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed

Supply and Fix 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed

Supply and Fix 75 mm PVC (SWR) bends any radius with acess door complete all as specified and directed

Supply and Fix 110 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

Supply and Fix 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed.

Supply and Fix 110 mm PVC (SWR) branch piece single (single Y) equal or unequal.with access door complete all as specified and directed.

Supply and Fix 75 mm PVC (SWR) junction single (T single) equal or unequal.with access door complete all as specified and directed

Supply and Fix 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door complete all as specified and directed.

Supply and Fix 160 mm PVC (SWR) bends any radius with acess door complete all as specified and directed

Supply and Fix in repair veneered decorative plywood 4mm thick grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws/ adhesive to timber frame work complete all as specified and directed.