Konkan LNG Limited Tender

DSR NO: 8.32 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

12.42/262 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (i) Single socketed pipes ( 110 mm Dia), Coupler and all accessories

Providing & fixing PVC false ceiling 10mm thick ISI/ISO marked in any colour & any size as per approved by Eingineer in charge. Work to be completed with all necessaries items like nut bolts/ tapes/ silicone etc. as per requirement of site. The work to be completed with all respect and as per direction of EIC.

ELECTRICAL WORKS

Supply and installation of LED light 20 Watt ( Make- Phillip/ Havells/ Bajaj)

Flexible copper cable single core 2.5 sqmm ( Make- Polycab/ Finolex/ Havells)

Supply and fixing of Extra Conduit : 25mm dia. Make: Polycab/Aashirwad/Astral

supply and installation of LED backlit Fabric box ( size- 6.5 ft X 30 ft) Make: Versadaig German fabric or equivalent

Total Basic Amount of SOR items

PLEASE MENTION HERE THE %AGE (PERCENTAGE) RATE BELOW (-) OR ABOVE (+) THE RATES MENTIONED AT “A”. Note: The quoted % shall be applied uniformly on all above SOR items in contract.

Total Basic Amount of all SOR items after (-) Discount/ (+) Premium Offered Over “A” Except GST in Rs.:

GST in %

Total Inc. Tax (Rs.)