MP State Tourism Development Corporation Limited Tender

2 ) (A) 20 seater Passenger/ Excursion Boat( with OBM) Specification • Material : FRP • Length Overall : 9.00m • Breadth : 2.940m • Depth : 1.06m • Draft : 500mm • Frame Spacing : 450mm • Capacity : (19+1) Persons • Engine : 40hp 4 S with Front steering with Wind Shield and remote control, electric start with battery. Mariner/Yahma/Tohatsu/Mercury/Suzuki • Navigation Lights With complete PVC canopy set and 6 pneumatic side fenders + 2 Ring Shaped Life Buoys. Life Jackets. 2.1 The Boat should be as per IRS/IACS/CE/ISC norms and manufactured by any IRS/IACS/CE/ISC approved yard. The IRS/IACS/CE/ISC norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority or any higher authority in the field.

(B) 20 seater Passenger/ Excursion Boat( with OBM) Specification • Material : FRP • Length Overall : 9.00m • Breadth : 2.4m • Depth : 1.1m • Draft : 0.5 to 0.75 m • Frame Spacing : 450mm • Capacity : (19+1) Persons • Engine : Powertec/Parsun 60 hp 4 S with • Weight without OBM : 900 kg • Front steering with Wind Shield and remote control, electric start with battery. Navigation Lights With complete PVC canopy set and 6 pneumatic side fenders + 2 Ring Shaped Life Buoys. Life Jackets. 2.1 The Boat should be as per IRS/IACS/CE/ISC norms and manufactured by any IRS/IACS/CE/ISC approved yard. The IRS/IACS/CE/ISC norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority or any higher authority in the field (A) And (B) to be quoted separately

3)(A) JET SKI Yamaha EX.-1050 (3-pax) Specification • 4 stroke, 2-pax, 1050cc, 4 cylinder, electric started, minimum 950 thrust, Length, Width, Height and weight as per normal standards of the Yamaha Company. The Equipment should be CE or any IACS member certified.

(B) JET SKI SEA DOO GTI 90 • 4 Stroke 90 HP • 3 pax • tool kit (A) and (B ) to be quoted seperately

4) WATER ROLLER • Design / shape of the water roller should be round • Diameter of the water roller should be minimum 3 mtr • Material of the water roller should be Heavy gauge PVC • Material Thickness should be minimum 1 mm • Features to be provided: vi) Minimum Three chamber inflation vii) Moulded PVC handles inside viii) Moulded PVC handles for outside entry ix) Two entry and exit portholes x) Speed safety valves for excess air pressure release

5) (A) Banana Ride (6-Seater) Double Barrel without speed boat complete set Specification • Banana type towable with holding supports should be provided • Heavy Duty PVC/ Neoprene/Hypolon material should be used. • Neoprene/Hypolon Thickness 1.5 mm to 2.0 mm • It should have the shape of Banana. • Capacity: 6 person • Foot Pump & Repair Kit should be provided

(B) Banana Ride (6-Seater) Single Barrel without speed boat complete set Specification • Banana type towable with holding supports should be provided • Heavy Duty PVC/ Neoprene/Hypolon material should be used. • Neoprene/Hypolon Thickness 1.5 mm to 2.0 mm • It should have the shape of Banana. • Capacity: 6 person Foot Pump & Repair Kit should be provided (A) And (B) to be quoted separately

6) Paddle Boat (Catamaran Type) FRP ( 4- Seater) Specification • Length : 3 to 3.50 meter • Beam not less than 1.5 to 1.6 meter • Depth 1 to 1.25 meter • Weight not less than 75 to 85 kgs. • FRP material • Draft 0.6 to 0.8 meter • Thickness 05 to 06 mm 6.1 The Boat should be as per IRS or any higher norms and manufactured by any IRS approved yard. The IRS norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority.

(A) HDPE Floating Jetty-covered Cube system TYPE I • The Floating Jetty Module should be made of High Grade High Density Polyethylene whose melt flow rate should be less than 3 g / 10 min @ 190 Degree C and 21.6 kg Load • The Floating Jetty Module should be able to fit in existing floating jetty modules that MPTDC already owns at various sites • Floating Jetty Module should be of L: 50 cm, B: 50cm, H: 40 cm • Weight of the Floating Jetty Module should be 8-9 kgs • Load carrying capacity should be Minimum 300 kgs/sqm • The shape of the Floating Jetty Module should be 3-Dimensional male-female interlocking such that the Floating Jetty Module can interlock by themselves • Each Floating Jetty Module should have a Separate Anti-Skid Top Cover of 14-15mm Thickness fitted in the cervix of the main module • The top surface should be fitted inside the side walls of the Floating Jetty Module and it should be bolted in such a way that there is no leakage of water from the point in which bolt is fixed between top and below surface thus making the surface the best Anti Skid surface available worldwide • There should be one more surface below the top surface with a gap in between top surface and surface below to enable expansion contraction of Floating Jetty Module which can also be used for passing of electric cables & water hoses if required • The lug thickness of the Floating Jetty Module should be 20-21 mm to ensure sufficient strength to the structure • For boat parking on floating jetty, HDPE ‘U Shaped’ Boat Parking male-female interlocking module of dimension 1.0m*0.5m*0.29m and weight 11-12 kgs with HDPE rollers & winch fixed on the floating dock for smooth boat parking. The quantity of these modules will be dependent on site requirement and these can be interchangeable with the main modules if required • For steps formation on floating jetty for ease of berthing, HDPE Half Float male-female interlocking module of dimension 0.5m*0.5m*0.25m and weight 6-7 kgs including separate top cover of 14-15mm thickness should be provided. The quantity of these modules will be dependent on site requirement and these can be interchangeable with the main modules if required • HDPE Heavy Duty Long Fender of minimum 1.5m length with 3 lugs to be fixed on the Floating Jetty at required places using Nuts & Boats of same material to protect floating jetty from being hit directly by the Boatscontinue------ • Aluminium Side Bars with Rubber has to be fixed in the lugs of the modules onto the sides facing water an interval of every 3 meters for safety of floating jetty • SS Barrier Railings(Optional) of Height 1 Mtr and Length 1.3 Mtr has to be provided • Solar Lights(Optional) to be fixed on the floating jetty of following specs: xii) The body dimension of solar light should be minimum 12 inch x 8 inch xiii) Aluminium alloy body to prevent bask in rain xiv) It should have strong infrared remote control receiving xv) It should be waterproof IP65 xvi) It should have high quality solar energy components xvii) It should have high lumen LED power – 20W xviii) Beaming angle should be 120 degree xix) Color temperature should be 6500k xx) Should have life of minimum 50,000 hours (LED) xxi) Should lighten for minimum 10 hours xxii) It should be fixed on SS barrier railings and height of the pole should be minimum 3 feet Note: 1) Test certificate of Melt Flow Rate of Raw Material should be submitted along with Technical Bid from CIPET India or any reputed research centers which are acceptable internationally 2) Proof of Purchase of Raw Material from the Manufacturer needs to be submitted along with Technical Bid whose Melt Flow Rate Certificate is submitted 3) Sample of the following has to be submitted along with Technical Bid for Physical Technical Verification: Floating Jetty Module, ‘U’ Shaped Module, Connecting Pin, Side Nut, Distance Disc, Cleat, Fender, HDPE Heavy Duty Long Fender.

(B) HDPE Floating Jetty system TYPE II • The Floating Jetty Module should be made of High Grade High Density Polyethylene whose melt flow rate should be less than 3 g / 10 min @ 190 Degree C and 21.6 kg Load. • Material HDPE • Dimension : 3m long x 2m wide x 400mm • Weight : 200 Kg • MOC - C6 PE with 11 UV stabilized • Deck : CEPT certified, anti skid, self draining, Chequered plate pattern • Resistance to impact : live load of 3kpa according to AS 3962 • Color : any • Temp. Resistance : 10 C to 60 C • Load : Each module uniformly distributed load of 1.2 tons • Note: 1) Test certificate of Melt Flow Rate of Raw Material should be submitted along with Technical Bid from CIPET India or any reputed research centers which are acceptable internationally 2) Proof of Purchase of Raw Material from the Manufacturer needs to be submitted along with Technical Bid whose Melt Flow Rate Certificate is submitted 3) Sample of the following has to be submitted along with Technical Bid for Physical Technical Verification: Floating Jetty Module, ‘U’ Shaped Module, Connecting Pin, Side Nut, Distance Disc, Cleat, Fender, HDPE Heavy Duty Long Fender. SQM

(C) HDPE Floating Jetty system with covered cube TYPE III • Material : High Density Polyethylene HDPE 50100 • Cube Dimension : 500x500x400 mm • Lug Thickness : 22mm(5% variation) to ensure sufficiant length. • Max Weight of cube with cover : 8.5 kg(5% variation) • UA Radiation Proof • Buoyancy Test Reort : QB 1557-1992 • Diagonal Tensile Strength Test Report : GB/T . 1-2006 • Compressive Strength : GB/T 8813 -2008 • Installation at site any where in M.P. (A) (B) and (C) to be quoted separately. SQM

Mountain Bike SCOTT ASPECT 970 MOUNTAIN BIKE MY 2018 Aspect 900 Alloy frame, Shimano Tourney 21 speed. Disc Brakes

Life Buoys (Standard Size) Ring Shaped 9.1 CE or any IACS member or IRS certified.

10 )(A) OBM 40HP (Petrol Operated) for speed boat/motor boat 4S EFI, ELPT with Remote Control System and with Trim Control (Power Trim), Fuel water separator fuel hose and fuel tank. Make : Mercury/Mariner/Yamaha/Tohatsu/Suzuki /Powertec/Parsun with all necessary standard fittings/accessories.

(B) OBM 60 HP (Petrol Operated) for speed boat/motor boat 4S EFI, ELPT with Remote Control System and with Trim Control (Power Trim), Fuel water separator fuel hose and fuel tank. Make : Mercury/Mariner/Yamaha/Tohatsu/Suzuki /Powertec/Parsun with all necessary standard fittings/accessories. (A) and (B) to be quoted separately.

11 ) (A) 30 SEATER Passenger/Excursion Boat(FRP)with OBM Specification Single Deck FRP Catamaran Mini Cruise Cum Party Boat for 30 persons fitted with 60- 75 hp OBM. Mercury/Mariner/Yahma/Tohatsu/Suzuki Length -not less than 10m Beam 4-4.5m Depth 1.6 to 1.75m Canopy, Front Steering with Wind Shield and Remote Control System with 8 pneumatic fenders. Life Jackets, two life buoys.Navigational lights, Bow anchor. 11.1 The Boat should be as per IRS/IACS/CE/ISC norms and manufactured by any IRS/IACS/CE/ISC approved yard. The IRS/IACS/CE/ISC norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority or any higher authority in the field.

(B) 33 SEATER Passenger/Excursion Boat(FRP)with OBM Specification Single Deck FRP Catamaran Mini Cruise Cum Party Boat for 33 + 4 persons fitted with 115-150 hp PowertecOBM. Length -not less than 10m Beam 4-4.5m Depth 1.6 to 1.75m Canopy, Front Steering with Wind Shield and Remote Control System with 8 pneumatic fenders. . Life Jackets, two life buoys. Navigational lights. Bow Anchor. 11.1 The Boat should be as per IRS/IACS/CE/ISC norms and manufactured by any IRS/IACS/CE/ISC approved yard. The IRS/IACS/CE/ISC norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority or any higher authority in the field. (A) and (B) to be quoted separately.

MS ( Mild Steel) 10-15 seater Passenger/ Excursion Boat specifications: Minimum Carrying Load 4 tons Length -10 -10.5 meter Beam -3.3 -4.0 m Depth -1.6 -1.75 m Made of 6mm Steel Plate with Frame Spacing not more than 500mm Fitted with 80-88 hp Inboard Diesel Motor with Hydraulic Gear Box, Stern Tube Brass Propeller S S Shafting, Steering and Remote Control Unit, Steel Deck, Safety Railing and Canopy. Seating for 10-15 people and storage space. 100% safe buoyancy. 12.1 The Boat should be as per IRS norms and manufactured by any IRS approved yard. The IRS norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority.

Poly ethylene (PE) Speed Boat (4 – Pax) • Hull should have Roto-moulded Double Skin Hull • Hull Material should be Poly Ethylene (PE) • Length should be between 360cm -390cm • Beam should be between 175cm – 195cm • Hull weight should be between 130kg – 150kg • Capacity should be minimum 4 persons with minimum 4 swivel seats • Bow shape should be of enclosed Conical Capsule Type with opening on the bow in the front for storage purpose • Fender Strip, Aluminium Outboard Bracket, Towing Eye, Foam, Anchor Cleat, Large Forward Hatch, Grab Handles (2pair), Passenger Grab Handle, Cleat, Fairlead, Battery Box, Steering, Plastic Floor • Windscreen should be provided • Console should be fitted on the dashboard • CE/NMMA Certified or any IACS Member Certified (Certificate to be submitted with Technical Bid) • Should be Surveyed/Endorsed by the Recognized Marine Surveyor/Naval Architect (Registered with MMD or State Maritime department) based on the certificate of CE/NMMA/IACS members) (A) With 40 HP 4stroke Remote, Electric Start . Mercury/ Tohatsu/Yamaha /Mariner/Suzuki OBM

(B) With 40 HP 4stroke Remote, Electric Start Powertec /Parsun OBM

(C) ) With 30HP 4stroke Remote, Electric Start . Mercury/ Tohatsu/Yamaha /Mariner/Suzuki OBM

( D) With 30HP 4stroke Remote, Electric Start Powertec /Parsun OBM (A) ,(B),(C) and (D) to be quoted separately.

14) IMPORTED INFLATABLE RAFT • Floating raft should be made up of Mehler PVC • Floating raft should be of Imported make • Length of the inflatable raft should be minimum 380cm • Width of the inflatable raft should be minimum 175cm • Tube diameter of the inflatable raft should be minimum 52cm • Inflatable raft should have 5+2 air chambers • Inflatable raft should have carrying capacity of minimum 8 persons Should be CE certified or any IACS member certified

15 ) RAFTING HELMET • Outer body of the rafting helmet should be made up of PC Alloy Hard Shell • Inner body of the rafting helmet should be made up of waterproof EVA (Ethyl Vinyl Acetate) • Rafting helmet should have removable ear protector • Rafting helmet should be CE approved Rafting helmet should be available in different sizes

16) (A) Raft Air pump Manual

(B) Rafting Air pump Electrical

17) A) RESCUE PE BOAT: • Rescue Boat should have Roto-moulded Double Skin Hull • Hull Material should be Poly Ethylene (PE) & Hull Type should be ‘V’ Shaped • Length of the Rescue Boat should be maximum 400 cm • Width of the Rescue Boat should be maximum 170 cm • Depth of the Rescue Boat should be maximum 55 cm • Weight of the Rescue Boat should be maximum 150 Kg • Capacity of the Rescue Boat should be minimum 8 Person • OBM: Minimum 30 HP 2 stroke Tiller Mercury/Tohatsu/Yamaha/Mariner/Suzuki OBM should be provided • OBM panel should be provided for fixing OBM • Mooring Ring, Mooring cleat and Chromed drain plug should be provided • Storage bench should be provided • Tow rope hole, Deck Lashing and Foot Bars should be provided • Rescue Boat should be CE/NMMA Certified or any IACS Member Certified (Certificate to be submitted with Technical Bid) • Rescue boat should be Surveyed/Endorsed by the Recognized Marine Surveyor/Naval Architect (Registered with MMD or State Maritime Board) based on the certificate of CE/NMMA/IACS members

B) Rescue Inflatable Boat: • Inflatable rescue boat should be made up of Mehler fabric • Length of the Inflatable rescue boat should be minimum 430cm • Width of the Inflatable rescue boat should be minimum 190cm • Tube diameter of the Inflatable rescue boat should be minimum 50cm • Inflatable rescue boat should have 4+1 air chambers • Inflatable rescue boat should be provided with 30HP 4 stroke OBM • Make of the Obm should be Mercury/Tohatsu/Honda • Bottom of the inflatable rescue boat should be wear resistance thick fabric • Inflatable rescue boat should have carrying capacity of minimum 8 persons • Certificate to be attached

C) RESCUE FRP BOAT: • Length of the Rescue Boat should be maximum 400 cm • Width of the Rescue Boat should be maximum 170 cm • Depth of the Rescue Boat should be maximum 55 cm • Weight of the Rescue Boat should be maximum 250 Kg • Capacity of the Rescue Boat should be minimum 8 Person • OBM: Minimum 40 HP 2 stroke Tiller Powertec • OBM panel should be provided for fixing OBM • Mooring Ring, Mooring cleat and Chromed drain plug should be provided • Storage bench should be provided • Tow rope hole, Deck Lashing and Foot Bars should be provided • Rescue Boat should be CE/NMMA Certified or any IACS Member Certified (Certificate to be submitted with Technical Bid) • Rescue boat should be Surveyed/Endorsed by the Recognized Marine Surveyor/Naval Architect (Registered with MMD or State Maritime Board) based on the certificate of CE/NMMA/IACS members (B) (B) (C) to be quoted separately

MINI PASSANGER CUM EXCURSION BOAT • Speed 20 to 25 knots • Capacity should be minimum 3 person on centre console • Mini Speed Boat should have Roto-moulded Double Skin Hull • Hull Material should be Poly Ethylene (PE) • Length of the Mini Speed Boat should be between 330cm -360cm • Beam of the Mini Speed Boat should be between 140cm-170cm • Hull weight of Mini Speed Boat should be between 150kg- 170kg • OBM: Minimum 30 HP 2 stroke Remote, Electric Start Mercury/ Tohatsu/Yamaha/Mariner/Mercury/Suzuki • Mini Speed Boat should be provided with Fender Strip, Outboard Bracket, Towing Eye, Cleat, Foam, Drain Bung, Grab Handles (2pair), Centre Console & Hinged Seat, Screen, Upholstery, Anchor Locker, Steering, Centre Console Hatch & Fastenings • Should be CE certified or any IACS member certified (Certificate to be submitted with Technical Bid) • Mini Speed Boat should be Surveyed/Endorsed by the Recognized Marine Surveyor/Naval Architect (Registered with MMD or State Maritime Board ) based on the certificate of CE/NMMA/IACS members

19) (A) 4 SEATER PE FAMILY PEDAL BOAT: • Family Pedal boat should be Roto-moulded Double Skin Hull • Hull Material should be Poly Ethylene (PE) • Length of Family Pedal Boat should be minimum 410 cm • Width of Family Pedal Boat should be minimum 150 cm • Depth of Family Pedal Boat should be minimum 95 cm • Weight of the Family Pedal Boat should be maximum 180 kg • Capacity of Family Pedal Boat should be 4 person or 400 kg • Propulsion system of Family Pedal Boat should be Pedal with Propeller • Family Pedal Boat should have built in Storage system • Accessories like Sunshade, Tug wheel & seat cushion should be provided • Windscreen should be provided

(B) 5 Seater PE Family Paddle Boat • Family Pedal boat should be Roto-moulded Double Skin Hull • Hull Material should be Poly Ethylene (PE) • Length of Family Pedal Boat should be minimum 244 cm • Width of Family Pedal Boat should be minimum 164 cm • Weight of the Family Pedal Boat should be maximum 50 kg • Capacity of Family Pedal Boat should be 4 person or 247 kg. (A) and (B) to be quoted separately.

20 ) (A) BOAT FENDER Type I • Material of the fender should be EVA (Ethyl Vinyl Acetate) • Fender should Not be Air-Filled • Should be Open core center Fender • Circumference should be minimum 48 cm • Should be suitable for boat size up to 30 feet • Buoyancy should be minimum 7 kg

(B) Boat Fender Type II • Material of the fender should be EVA (Ethyl Vinyl Acetate) • Model - F4 Color White • Weight - 2.9 Kg • Diameter -220mm • Length - 1040 mm (A) and (B) to be quoted separately

21) LIFE JACKET: • Life Jacket should have Unique Stowage Design • Life Jacket should have 2 Nos. Reflective Tape Front / one number onBack • Life Jacket should have 3 Nos. Polyester Webbing Belt attached with quick release Strong Buckle and Clip Slider Webbing Holder Easy to adjust. • Life Jacket should have 1 Hold on leg strap with quick release buckle adjustable lock slidder and emergency whistle • Life Jacket should be CE/IACS/ISC Member Certified

22) HEAVY DUTY PARASAIL WITH ALL Nylon Ropes: • Size of the Heavy Duty Parasail should be 30 Ft Parasail • Material of Heavy Duty Parasail should be 1.6 oz double silicone • Harness belt should be provided • Carry Bag should be provided • Carabineer should be provided • Heavy Duty Parasail should be of European Origin • All Nylon Lines for takeoff.

23 ) MOTORISED FLOATING BARGE • Safe carrying load 4 tons • Main function of the Floating barge should be to carry distributed load from one place to another • Construction of Motorised Floating barge should be modular with ease in assembly and dis-assembly without involvement of heavy machinery • Length of the Floating barge should be Min 5 meters • Overall Width of Floating barge should be Min 4 meters • Platform height of the Floating barge should be Min 0.8 meters • Floating Barge should be made of double layer HDPE floats • Floating barge should be made of High Grade High Density Polyethylene whose melt flow rate should be less than 3 g / 10 min @ 190 Degree C and 21.6 kg Load • Cube of floating barge should be of L: 50 cm, B: 50cm, H: 40 cm • Weight of the Floating Barge cube should be 8-9 kgs • Load carrying capacity should be Minimum 300 kgs/sqm • The shape of the floating barge Module should be 3-Dimensional male-female interlocking such that the modules can interlock by themselves • Each floating barge module should have a Separate Anti-Skid Top Cover of 14-15mm Thickness fitted in the cervix of the main module • The top surface should be fitted inside the side walls of the floating barge module and it should be bolted in such a way that there is no leakage of water from the point in which bolt is fixed between top and below surface thus making the surface the best Anti Skid surface available worldwide • There should be one more surface below the top surface with a gap in between top surface and surface below to enable expansion contraction of floating barge module which can also be used for passing of electric cables & water hoses if required- The lug thickness of the floating barge module should be 20-21 mm to ensure sufficient strength to the structure • For steps formation on floating barge for ease of berthing, HDPE Half Float male-female interlocking module of dimension 0.5m*0.5m*0.25m and weight 6-7 kgs including separate top cover of 14-15mm thickness should be provided. The quantity of these modules will be dependent on site requirement and these can be interchangeable with the main modules if required • HDPE Heavy Duty Long Fender of minimum 1.5m length with 3 lugs to be fixed on the floating barge module at required places using Nuts & Boats of same material to protect Floating Barge from being hit directly by the Boats • Aluminum Side Bars with Rubber has to be fixed in the lugs of the modules onto the sides facing water an interval of every 3 meters for safety of floating barge • Floating Barge should be encompassed in Hot Dip Galvanized Steel Fabrication • Floating Barge should have min 4mm Aluminum Checkered Plate flooring • Floating barge should have powder coated MS handrails & MS galvanised bow Carrying capacity of Floating Barge should be about 5 Ton • OBM: Min 30 HP 2 Stroke remote operated of reputed Brand like Mercury/Tohatsu/Yamaha/Mariner/Suzuki should be provided • Floating barge should be self propelled • Floating barge should have : vi) 2 seater Captains cabin with foam seats and aluminum flooring vii) Transom suitable for min 30 HP OBM. viii) Steering controlled ix) Provision for OBM remote attachment x) Fire Extinguisher Note: 1) Test certificate of Melt Flow Rate of Raw Material should be submitted along with Technical Bid from CIPET India or any reputed research centers which are acceptable internationally 2) Proof of Purchase of Raw Material from the Manufacturer needs to be submitted along with Technical Bid whose Melt Flow Rate Certificate is submitted

WATER SKI • Water Ski should be of Composite construction and fiberglass reinforced nylon fins • Length of the water ski should be minimum 170cm • Water Ski should have wide tails, Tunnel shaped bottoms for performance, control & stability • Water Ski should have slide type adjustable bindings • Water Ski should be suitable for size 5 to 11 • Water Ski should be perfect for different skill levels Pairs

Aluminum Paddles for Rowing (Pair)

Parasailing Boat: • Length of the parasail boat should be minim 1000 cm • Width of the parasail boat should be minimum280 cm • Depth of the parasail boat should be minimum 140cm • Draft of the parasail boat should be minimum 45cm • Carrying capacity of parasail boat should be minimum 12 persons • Speed of the parasail boat should be minimum 25knots • Engine of the parasail boat should be minimum 330HP @ 3500RPM Volvo penta • Parasail boat should be provided with heavy duty parasail • Size of the heavy duty parasail should be 30 Ft parasail • Material of heavy duty parasail should be 1.6 oz double silicone • Harness belt should be provided • Carry Bag should be provided • Carabineer should be provided • Heavy duty parasail should be of European Origin The Boat should be as per IRS/IACS/CE/ISC norms and manufactured by any IRS/IACS/CE/ISC approved yard. The IRS/IACS/CE/ISC norms compliance certificate to be issued by any qualified Naval Architect registered with MMD/any State Maritime Board or authority or any higher authority in the field .