MP Laghu Udyog Nigam Limited Tender

Roller blind :Providing and fixing of vertical dust proof roller blinds of approved shade texture fabric (opaque/ eclipse) with Aluminum gear and rolling arrangement Duly power coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of eng in charge. The job shall include all material labour, wastages etc. complete

Providing and applying Texture paint of super fine quality.it shall be applied after preparing the surface to be satisfaction of the Eng. in charge to get the proper finish. The paint shall be applied using texture roller and using necessary tools (Denim brush butter paper) to get a uniform roller texture paint as specified by the consultant & Eng. in charge. The rates are inclusive of all items including lead &lift and necessary to complete, the item in good condition nothing shall be paid extra separately unless specified

Performer model : Single Seater : 600 (w) x 945(d) x 760mm(H) Table desk Height-Front End 760mm Ht, User end 740 mm Ht, Angle Slant of 3 deg Provided for better utilization and writing comfort of the user. Table bench Height 440 mm Ht and Bench Seat & Seat back Angle of 7 Degree facilitate. Wooden Sizes & Specs : Pre-laminated particle board confirming to IS 12823 with pvc edge banding of below sizes, Desk Table Size = 1200(W) x 400(D) x 18mm(T) - OSL Particle Board, Desk Seat Size = 1200(W) x 330(D) x 18mm(T) - OSL Particle Board, Seat Back Size = 1200(W) x 170(D) x 18mm(T) - BSL Particle Board, Shelf Size = 600(W) x 300(D) x 18mm(T) - OSL Particle Board. Under structure Specifications: nos of Specially designed Oval or Square MS Pipe legs to support desk, book shelve, seat and back made of 30.5-25.5 x 16 mm size with 2.0 mm wall thickness in powder coating finish with necessary Leg Brackets for stability and rigidity. 4 nos of tie members with flanges of size 600(W) x40(D)x35 (H) x1.6mm-2.00mm Thick CRCA welded with end Bracket of 3mm thk to Join with Legs, desk, seat and back. 1 nos of perforated CRCA shelve covers of size 650 W x 200 H x 0.8mm thickness with powder coated finish (Sample approved before supply) Herman miller/ godrej /or equivalent make.

Supplying installation testing and commissioning of Digital Teaching Device solution system 01) Cabinet:-Wall mounted lockable endorse made of CRCA steel sheet, 02) CPU:- Intel core i3 processor 3.1 GHZ 03) RAM:- 4 GB(expandable to 64 GB) 04) Hard Disk :-1 TB 05) Keyboard and Mouse :-Wireless 06) Operating system :- Windows 10 07) Central controller: - Available with system on/off PC on/off projector on/off, volume control keys, external PC input, GA input etc. 08) Diagonal Size :- 78 Inches 09) Board Surface:- Ceramic coated scratch resistant surface with 100 percent eras ability. Fully erase the making of whiteboard marker pen on the surface using ethanol. 10) Resolution:-32767x32767 11) Touch Technology:- Infrared, Finger and 12) OS Compatibility:- Windows 10 and Linux 13) Hot keys/shortcut keys:-Available on both sides of board 14) Software Features :- Annotation feature like draw, choose ,pens, annotate erase colour shapes sizes, text edit fonts, stamp, move capture picture, video, save ,image gallery, print, floating keyboard, background etc. Network classroom feature to conduct remote teaching by having interaction through all the three types of media Audio, video and text 15) Power consumption /power :-,0.5 w, USB Powered 16) Operating Temperature/RH 00-450 ,90 % rh at 400c 17) Accessories:- Stylus ,USB cable, software and user manual CD wall mount kit 18) Portable CMOS Technology and image size : Minimum A4 size (210x297 mm) 19) Resolution :-Full hd (1920x1080) 20) Video frame rates:- 30 FPS 21) Zoom :-12xoptical,8xDigital with Automatic focus arrangement 22) Camera rotation :180 Degrees in horizontal,180 degrees in vertical alignment 23) Projection Arm:-DLP Technology with 1280x800((WXGA) 4000 Lumens (Make-Brio/Maxhub/Aveco)

Providing and fixing of approved quality wallpaper with approved graphics and folder (as per architect) and pasted on the panels & partition on surface prepared with putty with required adhesive on the surface (the rate does not include surface preparation) basic rate of wall paper is RS 2000 to 2200 per sqm. The item in good condition nothing shall be paid extra separately unless specified

Providing and fixing of file storage cabinet 450mm wide Godrej/Herman miller/Haworth or equivalent file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thick laminated all drawer to be mounted on telescope channels of (Hettich/ebco or equivalent) approved make .All exposed edges to be finished with Ist quality beading. All inside surface to be finished with 1.00 mm thick laminated. The cost is inclusive of all material, accessory, SS handle lock labour etc. complete .All plywood only century, greenply/ duro/ archid.

Providing and fixing of veneer/Laminates finish COPA Lab table have top 20-25mm thick after finish & 600 mm deep table top made by 19mm thick BWP ISI Grade plywood, storage by using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. The table top fixed on the 300mm deep and 725 mm high veneer finish wooden cabinet made by 19mm BWP plywood. Cabin ate shall have vertical members of 19mm thick BWP plywood at intervals of 900 mm c/c or as per instruction. Table top fixed 5mm thick toughened glass partition for equal interval/division ,table shall have inner lining of approved colour 1.00mm thk decorative laminate. Table shall have provision for cable manager & raceway to accommodate wires for PA System networking ,electrical ect .Side of the table top shall be finish with acrylic solid surface& veneer as per approved. All wooden & veneer surface shall be duly melamine polished finish/Table should be measured in running length only from one side. All work shall be carried out as per instruction of Architect all Plywood used in BWP Only, Veneer/laminate make: century/Orchid plywood. ( furniture Green guard/Bifma certified co)

Providing and placing of MID back Computer chair ,chair type bio synchronic with fixed arm, ergonomic seat design, backrest made up two piece injection molded frame backrest symmetrical lumber support with material of aluminum die cast with ABS/nylon pu foam covered with mesh fabric 220 gram GSM thickness of fabric 5% (gram/sam) with a warranty period of 2 year product must be approved before supply.(Sample chair approved before supply)

Wooden solid Low height partition:-Providing and fixing of LOW height partially glazed partition 75mm thick till 5’ height made on frame work of 18mm BWP Plywood Grid SIZE 500 mm x 500 mm horizontally and vertically with 12mm thick ISI grade premium quality BWR plywood on both sides, plywood should be finished with 4mm thick veneer/ 1.00mm thick laminate as per Drawing. The framework shall be secured to the flooring. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail Dwg. The rate shall include ant termite treatment all hardware fitting, adhesive beading (12mmx75mm) etc., to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified. Plywood century/ greenply/ duro/archid.

Wooden Solid full height Partition:-Providing and fixing of full height partially glazed partition 75mm thick till roof height made on frame work of 18mm BWP PLY GRID SIZE 500MMX500mm horizontally and vertically with 12mm thick ISI grade premium quality BWR plywood on both sides, plywood should be finished with 4mm thick veneer/laminate as per Drawing. The framework shall be secured to the flooring and celling. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG, The rate shall include ant termite treatment all hardware fitting, adhesive beading(12mmx75mm) etc., to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified Plywood century/ greenply/ duro/archid.

Providing & Fixing Glazed Partition, with door shutter with 12 mm-20 mm thick (As Per Instruction of architect) touhened glass to be secured in power coated Z aluminium profile 2.00 mm thk channel with all hardware fitting also providing & fixing top & Bottom pivot double action hydraulic floor spring trap fixing arrangement, door handle, lock, stopper, finally all glazed partition and door laying 50 micron decorative film as per instruction complete in all regard as per architectural drawing as approved by consultant Eng. in charge, glass door shutter of approved brand manufacture.

Supplying installation, Testing & Commissioning: 01) Processor-AMD Ryzen 4300 G OR BETTER 10th Generation 02) Chipset:- Compatible chipset 03) Memory:- 8GB 2666 MHz DDR4 Expandable to 32 GB Minimum 2 DIMM Slot 04) Storage (HDD)-1 TB 7200 RPM SATA HARD Drive 05) Display:-21.5 “ IPS Display 06) Graphics:- Integrated/Discrete Graphics Card 07) I/O Port:-( 1) Minimum 6 USB Ports (2 USB 3.1 Ports ,4 USB 2.0 PORTS (2) Minimum 1XVGA/HDMI/DP PORT (3) 1 UNIVERSAL Audio jack for Headphone &Mic 08) Networking:- Integrated Gigabit (10/100/1000 NIC)LAN 09) Wi-Fi & Bluetooth:- WI-FI 802.11 b/g/n/ac Bluetooth 4.0 or between 10) Expansion slots:- Minimum 1x PCLE16,1XPCLEX1 11) Optical Drive:- Internal DVD RW 8X or better 12) Security:- 2.0 TPM 13) Operating system:-Windows 10 Professional 64 Bit 14) Power Supply:- Minimum 180 watt with 85% or Higher energy efficient power supply 15) Certifications:- UL/MET,FCC,EPEAT,ENERGY STAR CE (Make - HP/Dell/Accer/Regal)

Door Paneling :- Providing & fixing for paneling on walls /column /beam etc. by using dimensionally stable and wrap free ISI marked plywood/blackboard/mdf sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall should properly fixed with M seal compound and rawl plug/The job shall be included all material labor wastage etc. complete plywood marine grade IS 710 01) BWP Grade IS 5509 a) 18 mm thick plywood b) Finally finished with 1.00 mm thk laminates work complete as per instruction of Architect

Providing and fixing of walls/column /beam/floor etc. by using dimensionally stable and wrap free ISI marked plywood/blackboard/MDF sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall ,floor should properly fixed with m seal compound and rawl pugs. The job shall be include all material, lobour ,wastage etc. complete plywood century/orchid 01) 12mm thick

Providing and fixing of walls/column /beam/floor etc. by using dimensionally stable and wrap free ISI marked plywood/blackboard/MDF sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall ,floor should properly fixed with m seal compound and rawl pugs. The job shall be include all material, lobour ,wastage etc. complete plywood century/orchid 02) 18mm thick

IT LAB WORKING TABLE :- Providing and fixing of veneer finish(950-1200 mm width)Working table have top 30-35mm thk after finish &600 mm deep table top made by 19mm thk BWP ISI Grade plywood, the table top fixed on the 300mm deep and 725 mm high veneer finish wooden cabinet made by 19mm BWP plywood. cabinet shall have vertical members of 19mm thk BWP plywood at intervals of 900 mm c/c or as per instruction. Table shall have inner lining of approved colour 1.00mm thk decorative laminate. Table shall have provision for cable manager &raceway to accommodate wires for PA System networking ,electrical ect .Side of the table top shall be finish with acrylic solid surface& veneer as per approved. All wooden & veneer surface shall be duly melamine polished finish/Table should be measured in running length only from one side. All work shall be carried out as per instruction of Architect Veneer/laminate make: century/Archid plywood.( furniture Greenguard/Bifma certified co)

Supplying and testing & installation of Server of RFP Parameter:-Remoter power on/shutdown of server, Remote Management of server over LAN &wan With SSL encryption through gigabit management port should have virtual Media support with all required licenses, Remote KVM Server Health Logging, Management of multiple servers from single console with single source of truth for multiple sites. Automated infrastructure management for patch upgraded version upgraded etc., simplified management with analytics driven actionable intelligence, system tagging giving admin flexibility to provide metadata tag to each system attributes. Hardware profile based deployment of single policy to multiple servers simultaneously, Platform inventory and health status server utilization statistics collection( including firmware updates and diagnostic tools) Should provide an alert in case the system is not part of Oem Hardware compatibility test solution should be open and programmable providing Rest APL.SDK for Programming languages, Server Security secure boot(Firmware and bios level security) Provision to lock the system on Breach .Hardware root of trust /DUAL root of trust/Dual Root of Trust, server should provide policy based security, server should provide servers intrusion detection. “Malicious code free design”(to be certified by OEM) Provision for cryptographic firmware updates capability to stop execution of application/Hypervisor/operating system on predefined security breach, Secure/Automatic BIOS recovery, Network card secure firmware boot, in case of any security breach system should provide the lock down feature 01) COMPATIBLE CHIPSET 02) Display:-18.5” TFT 03) Processor Description :-AMD EPYC 8 CORE/16 Threads,3.0 GHz base frequency ,Min 32 MB Cache 04) Form factor:- 1 U RACK 05) Memory Slots:-16 DDR4 DIMMM Slots, Memory Frequency 2933 MHz 06) Memory configured:- 2x16 GB DIMMs 07) HDD Storage:-no of Slots-4 Capacity offered per SATA drive-2000 GB 08) RAID Controller:-0-10 09) Power Supply:-Platinum rated power supply 550 watts Maximum power consumption (Make - HP/Dell/Accer)

EXCUTIVE Table with Runner :-Table size :(1500mm x1000mmx750mm) & Runner Size:- (1200x450x650) Providing and fixing in position table as per design by using 25mm thick plywood for top and 18 mm thick plywood for all other horizontal and vertical members telescopic cpu stand/modular keyboard tray shall be provided of approved model and make .All exposed plywood surface to be finished with 1mm thick laminate & unexposed surface to be finished in matching coat of French polish in required coats, including cost of all hardware etc. work complete as per instruction Architect/Eng. in charge furniture Green guard/Bifma certified co)

EXECUTIVE CHAIR(high back) Supplying and installing high back chair model mint-1 ergonomically designed for contoured lumber support for extra comfort having seat made up of insert molded polyurethane foam of density 75 +/- 4 kg/m3 upholstered with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection moulded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly ,the armrest top made up of injection molded polyurethane and mounted on the injection moulded height adjustable type armrest with height adjustable up to 45+-5mm synchronized pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature pneumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam upholstered with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminum fillted with 5 no twin wheel castors which ar injection moulded in back pp all complete as per manufacture specification and direction of eng in charge.

Providing and fixing of Executive visitor chair Godrej /Herman miller/Haworth or equivalent make chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The hr pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt syncro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow assy: it is 3 pc telescopic type and injection moulded in black pp. The pedestal is injection moulded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors).

Providing & fixing in Assistance table (size 1200 mm x 900 mm x 750 mm ) as per design including side storage by using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. All exposed plywood surfaces to be finished with 1 mm thick laminate as per , ( all plywood used only , century, greenlam, acero, gold wood or equivalent make ). (furniture Greenguard/Bifma certified co)

Providing & fixing in position Instructor table (size 1400 mm x 900 mm x 750 mm ) as per design including side storage by using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. All exposed plywood surfaces to be finished with 1 mm thick laminate as per , ( all plywood used only , century, greenlam, acero, gold wood or equivalent make ). (furniture Greenguard/Bifma certified co)

Providing and fixing of Single seat sofa of size 600mm X650X400mm in length with primary/secondary frame structure made with 19mm BWP plywood and 70mm elastic belt and 10mm foam around the framing and legs of sofa made with first class best quality seasoned teak wood as per directed by Architect/Eng. in charge. Sofa should be have cushioning with 36D Foam+20mm thick 28 d foam 25mm butter foam and covered with white finish cloth and then with premium quality fabric upholstery. (furniture Greenguard/Bifma certified

Supplying and fixing of wooden sofa side table of (400mm L X400mm wx400mm H) Table top made with 19mm BWP plywood and finish with 4mm veneer or 1.00 thk laminated finished and legs and frame of table made with first class best quality seasoned teal wood as per detail. All work shall be carried out as per detail drawing and instruction of Architect/eng –in charge ( furniture Greenguard/Bifma certified co)

Supplying and fixing of Delegate chair of size 450x450 x900mm and seat size 500x500x450(lxbxh) 4 ledge structure made out of I ST teak wood finished with melamine polish, Chair having standard arm seat base with XPU 40mm foam cover with interior match colour fabric and seat back same. The rate are inclusive of all hardware tools and machinery including leads lift and necessary to complete the item in good condition nothing shall be paid extra separately unless specified.

Three track Three panels sliding windows with SS Fly Proof Mesh made of frame 95x50mm &sash 38x66 mm both having wall thickness of 2.3+-0.2 mm and single glazing bead/double glazing bead of appropriate dimension (Are of windows above 1.50 Sqm to up to 3.5 sqm)

U Shape Meeting Table:- Providing and fixing of veneer finishU-Shape Meeting table have top 30-35mm thick after finish &600 mm deep table top made by 19mm thick BWP ISI Grade plywood, the table top fixed on the 300mm deep and 725 mm high veneer finish wooden cabinet made by 19mm BWP plywood. Cabinet shall have vertical members of 19mm thick BWP plywood at intervals of 900 mm c/c or as per instruction. Table shall have inner lining of approved color 1.00mm thick decorative laminate. Table shall have provision for cable manager &raceway to accommodate wires for PA System networking, electrical etc. .Side of the table top shall be finish with acrylic solid surface& veneer as per approved. All wooden & veneer surface shall be duly melamine polished finish/Table should be measured in running length only from one side. All work shall be carried out as per instruction of Architect Veneer/laminate make: century/Orchid plywood.( furniture Green guard/Bifma certified co)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge

Providing and laying multi charge Full body matt finished digital vitrified tiles of sizes having water absorption less than 0.05% and conforming to is: 15622 of make:-Rak Nitco premium quality laid on 20mm the base of cement mortar 1:4 (1cement” 4 Sand) in all shapes and design including epoxy resins matching combined with a filler power grouting the joint work complete as per direction of eng in charge. Tile size (600mmx1200mm)

Supplying and fixing 6 mm thickness polished Mirror glass fixed on wall with SS 35X5mm bolt and Mirror glass all edge finish curved shaped, work complete as per instruction of Eng in charge.

Providing and fixing of wooden center table of size (800mm LX800mmWX400mmH ) Table top made with 19 mm BWP plywood finish with 1.00thk laminate and leg and frame of table made with first class best quality seasoned teak wood.All work shall be carried out as per detail and instruction of Architect/Eng in charge.( furniture Greenguard/Bifma certified co)

Providing and fixing of stainless steel body dust bin height 450mm-900 and dia 300mm-600 aisi 302 grade

Providing and placing Notice Board (6x3) of made Godrej /Herman(6x3) of make Godrej/Herman miller /Haworth/knoll having the following specification:-Size of board shall not be less than 6”wx3”H Surface material shall be woolen felt fabric. Core material shall be min 9mm thk soft board. Best quality rubber spray bale adhesive shall be used Backing material shall be 0.62 mm to 0.82 mm thk laminates sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thk ISI mark GP sheet. Aluminum frame shall be anodized (5 microns thick. Extruded aluminum section designation 63400 as per IS :1285-2002-16 mm thk)chrome plated wall mounting bracket at all four corners fitted with aluminum revert. The Agency product shall be BIFMA compliant ans as per approved sample of Notice Board by Eng. in charge in consultation with client department before providing it at site

Supplying and installation of 75” interactive flat panel, infrared Technology, TFT LCD Module with DLED Backlight.VA,1428.48mm HX803.52 V mm (64.5” diagonal area diplay,32 GB Storage capacity ,ARM quad core cortex A55 12mm ,ir Recognition,32768x32768 touch Resolution i3/46b ram/256 6Bssd PC inbuilt until wall mounting (Make - Samsung/Viewsonic/LG)

Supply, installation testing and commissioning of Staff Station Reader, RFID Handheld Reader, Self- Checkout Kiosk System and RFID Security Gate. (Make-Regal/LG/HP)

Supply, installation testing and commissioning of RRHFGA2 is a walk through gate antenna system which reads the tag in all three orientations. It is combination of Gate Antennas and Long range reader. It can keep log of all items passing through the gates. It also sounds buzzer on passing of unauthorized items or as per configuration set. RRHFGA3 is a three pedestal antenna to cover wider area for reading of tags

Supply, installation testing and commissioning of Institution Labels.

Supply, installation testing and commissioning of Mifare 1KB Contactless 1Kv RFID 13.56 MHz Plain White Smart Cards, 13.56 MHz Contactless Card; 1 KB smart card; 1k Mifare card; mifare card .

Supply, installation testing and commissioning of Self Check In/Check Out Kiosk. High transparency, high precision and durability, Vandal Proof, Projected Capacitive Touch, Anti-rust, anti-acid, anti-dust Saw touch and IR touch for option.

Supply, installation testing and commissioning of RFID Handheld Reader.

Supply, installation testing and commissioning of RFID Book Drop Box

Supply, installation testing and commissioning of RFID Tags for CD/DVD.

Supply, installation testing and commissioning of This Course comprises 21 audio-video spoken tutorials, using which you can self-learn KOHA Library Management System.

Supply, installation testing and commissioning of Smart Card Printing System (Includes Smart card Printer,1 Ribbon, Web Camera, Pen Tablet, And Print Application Software)

SITC of Screen Array speaker Most have 2- Way Speaker incorporates a 12" extremely low distortion low Mid driver in conjunction with a coaxially mounted 1.17" voice coil high frequency compression driver frequency Response 55 Hz to 20 kHz Power Rating LF:500W AES, 2000 W Peak HF:80WAES,450W Peak Sensitivity LF:98 dB @ 1W/1m HF: 113 dB @ 1W/1m

Supplying MIC crown cordless microphone

Supply installation, testing and commissioning studio master DYS-208 speaker-120 watts

Supply, installation, testing and commissioning of RFID Tags For books. handheld device with Barcode/RFID Scanning, 1D/2D/RFID/4G/NFC Note:- The Bidder Shall quote his own rates for item rates 1 to 51