MP Laghu Udyog Nigam Limited Tender

Providing and fixing decorative laminate as per ISwith marine grade PVA glue ( fevicol ) applied @ 0 .45 kg per sq mtr to partition , paneling , roof beam or similar places as directed in design and pattern having pin groove .1.0 mm satin finish

Roller Blinds : Providing and fixing of vertical dust proof roller Blinds of approved shade texture and fabric ( opaque / eclipse )with aluminium gear androlling arrangement , duly powder coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of engineer in charge.

Providing and Fixing Conference Hall room table 600mm wide made of 18 mm bWP plywood with 1.00 mm decorative laminate finsish inner and outer side with 24mm table top front provision for wire manager and two conceled electric pulg inclusive of all material labour complete.

Providing and Placing of EXECUTIVE HIGH BACK CHAIR the cushioned seat is to be made of injection moulded plastic outer .Plastic inner shall be upholstred with moulded high resilience foam of density 45+/-2kg/m compression. Seat Size 47.0cmx48.0cm The cusioned back is made of PU foam.The High back should be size of 76.4cm :the chair should be of size.Machenish should be active bio- Synchro mechanism .The adjustable tilt mechanism should be 360 degree revolving type Front pivot for tilt with feet resting on ground and continious lumber support for more comfort.5 position tilt limber and tilt tension adjustment can be oprated in sitting position. With Up /Down Machenism With 5 Nos Twin Wheel castors. The 5 Nos Wheel castors shall be injection moulded plastic having 6.0+0.1cm Wheel dia and assambled to padestale.Make GNF /Howerth/Knoll(GRIHA /BIFMA LEVEL 2 CERTIFIED)

Providing and Placing of EXECUTIVE MID BACK CHAIR the cushioned seat is to be made of injection moulded plastic outer .Plastic inner shall be upholstred with moulded high resilience foam of density 45+/-2kg/m compression. Seat Size 47.0cmx48.0cm The cusioned back is made of PU foam.The High back should be size of 76.4cm :the chair should be of size.Machenish should be active bio- Synchro mechanism .The adjustable tilt mechanism should be 360 degree revolving type Front pivot for tilt with feet resting on ground and continious lumber support for more comfort.5 position tilt limber and tilt tension adjustment can be oprated in sitting position. With Up /Down Machenism With 5 Nos Twin Wheel castors. The 5 Nos Wheel castors shall be injection moulded plastic having 6.0+0.1cm Wheel dia and assambled to padestale.Make GNF /Howerth/Knoll(GRIHA /BIFMA LEVEL 2 CERTIFIED)

Providing and fixing Three Seater Sofa with Arm rest and high density foam in back and seat with high quality fabric as per design and direction of engginer in charge

Providing and Fixing Runner made of 18 mm BWR grade ply finished with Decorative Laminate inner and outer both side of depth 450mm height 750mm with shutters hardware etc complete

Providing and Fixing Dyeing Section Unit with platform made of 18 mm thick plywood and finished with 1.00 decorative laminate as per design with Granite top shutters and top unit .

Providing and Fixing Storage rack made of 18mm Thick plywood and finish with 1.00mm thick laminate as per design

Providing Center Table of size 1.20x0.60 made of 18 mmply and finsihed with 1.00mm thick laminate with glass top

Providing and fixing 12 mm Glass partition with frameless 12 mm Toughened glass door (S/L) on floor springs & point fittings with accessories like corner lock/ pivot/ upper hinge/ lower hinge/ over panel/ impost hinge & connectors locking arrangements & other accessories as necessary of SS 304 (Saint _ Gobain or dorma , ozone ) make. Door edges shall have neoprene gasket .Vendor to submit design and make & Model No. of all fittings for all heights as required and directed by Engineer in charge. Glass partition and Doors

Providing and fabricating Table made of 18 mm ISI BWR grade Plywood size 2.00x0.90x0.75 with side runner having arrangement for CPU keyboard with 3 drawers in table and 2 drawers and storage shutters in runner

Providing and fabricating Table made of 18 mm ISI BWR grade Plywood size 2.00x0.90x0.75 with side runner having arrangement for CPU keyboard with 3 drawers in table and 2 drawers and storage shutters in runner

Providing and Fabricating Storage almirah for records having sliding shutters made of 18mm thick ISI BWR garde pltwood finished with 1.00 mm Thick decorative laminate inside and outside having arrangement for files ,locker and arrangements as per engg. In charge of size 3.60x2.40