MP Laghu Udyog Nigam Limited Tender

Executive Table with Runner :-Table size :(1800mm x1000mmx750mm) & Runner Size:- (900x450x650) Providing and fixing in position table as per design by using 25mm thick plywood for top and 18 mm thick plywood for all other horizontal and vertical members telescopic cpu stand/modular keyboard tray shall be provided of approved model and make .All exposed plywood surface to be finished with 1mm thick laminate & unexposed surface to be finished in matching coat of French polish/1.00 mm Thick laminate (if Req.) Coates, including cost of all hardware etc. work complete as per instruction Architect/Eng. in charge. Plywood century, green ply, duro, archid or equivalent make furniture Greenguard/BIFMA certified co)

Executive chair(high back) supplying and installing high Back chair model mint-1 ergonomically designed for contoured lumber support for extra comfort having seat made up of insert molded polyurethane foam of density 75 +/- 4 kg/m3 upholstered with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection molded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly, the armrest top made up of injection molded polyurethane and mounted on the injection molded height adjustable type armrest with height adjustable up to 45+-5mm synchronized pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature pneumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam upholstered with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminum filleted with 5 no twain wheel castors which ar injection molded in back pp all complete as per manufacture specification and direction of eng in charge.

Providing & fixing in position Assistance/computer table (size 1200 mm x900 mm x 750 mm ) as per design including side storage by using 25mm thick plywood (boarder area) for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. All exposed plywood surfaces to be finished with 1 mm thick laminate as per , ( all plywood used only , century, greenlam, acero, gold wood or equivalent make ). (furniture Greenguard/BIFMA certified co)

Providing and fixing of chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The hr pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt synchro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow ASSY: it is 3 pc telescopic type and injection molded in black pp. The pedestal is injection molded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors). (Make-godrej /Herman miller/Haworth)

Providing and placing of mid back revolving chair ,chair type bio Synchronic with fixed arm, ergonomic seat design, backrest made up two piece injection molded frame backrest symmetrical lumber support with material of aluminium die cast with abs/nylon pu foam covered with mesh fabric 220 gram gsm thickness of fabric 5% (gram/sam) with a warranty period of 1 year product must be approved before supply.

Providing and fixing of Single seater sofa of size 600mmX 650X400mm in length with primary/secondary frame structure made with 19mm BWP plywood and 70mm elastic belt and 10mm foam around the framing and legs (if Reqd.) of sofa made with first class best quality seasoned teak wood as per directed by Architect/eng in charge. Sofa should be have cushioning with 36D Foam+20mm thick 28 d foam 25mm butter foam and covered with white finish cloth and then with premium quality fabric upholstery. (Make- Greenguard/BIFMA certified co)

Supplying and fixing of wooden sofa side table of (400mm L X400mm wx400mm H) Table top made with 19mm BWP plywood and finish with 4mm veneer or 1.00 thk laminated finished and legs (if Reqd.) and frame of table made with first class best quality seasoned teal wood as per detail. All work shall be carried out as per detail drawing and instruction of Architect/eng –in charge ( Make- Greenguard/BIFMA certified co)

Providing and fixing of file storage cabinet 450mm wide file storage cabinet made up of 18mm BWP ply ,ply finished with 1.00mm thk laminated all drawer to be mounted on telescope channels of (Hettich/ebco or equivalent)approved make .All exposed edges to be finished with Ist quality beading.All inside surface to be finished with 1.00 mm thk laminated.The cost is inclusive of all material,accessory,SS handle lock labour ect complete . (Make-century,greenply,duro,archid)

Curved MDF Paneling:-Providing &fabricating paneling on Existing curved wooden frame work The frame work shall be clad with 6+6 mm thick flexi ply &4mm thick MDF finished with approved color Duco paint, complete as per Dwg detailed or instruction of the Eng.-in charge

Providing and placing Notice Board (6x3) of made Godrej/Herman (6x3) of make Godrej/Herman miller /Haworth/knoll having the following specification:-Size of board shall not be less than 6”wx3”H Surface material shall be woolen felt fabric. Core material shall be min 9mm thick soft board. Best quality rubber spray bale adhesive shall be used Backing material shall be 0.62 mm to 0.82 mm thick laminates sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thick ISI mark GP sheet. Aluminum frame shall be anodized (5 microns thick. Extruded aluminum section designation 63400 as per IS: 1285-2002-16 mm thick) chrome plated wall mounting bracket at all four corners fitted with aluminum revert. The Agency product shall be BIFMA compliant as per approved sample of Notice Board by Eng. in charge in consultation with client department before providing it at site

Providing and placing 4 Door important document case of make Godrej/Herman Miller /Haworth having the following specification: it shall have the configuration of 914 mm (W) X320 mm (D) 1742 mm (H) it shall have unique design providing the right rigidity to top hinged doors to facilitate easy use. The shall have a right knock Down construction. The top panel, back panel and side panel shall be made of 0.7mm high yield CRCA and other components from 0.8mm CRCA Each door shall have a 6 lever cam lock with common key.3mm thick glass shall be used in each door to clear inside vision which shall be secured in a metal frame through a rubber gasket. Scissor Mechanism shall be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each Door shall be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDI .Capacity of max80kg.The 2 Door case shall have 18mm PLB top straight edge with PVC lipping. The finishing shall incide Epoxy power coated to the thickness of 50 microns .The agency product shall be BIFMA Compliant as per Approved sample of 4 Door document case by Eng.-in –charge in consultation with client department before providing it at site.

Wooden solid Low height partition:-Providing and fixing of LOW height partially solid/glazed partition 75mm thk till 5’ height made on frame work of 18mm BWP PLY GRID SIZE 500MMx500mm horizontally and vertically with 12mm thk ISI grade premium quality BWR plywood on both sides ,plywood should be finished with 4mm thk veneer/ 1.00mm thk laminate as per Drawing. The framework shall be Screwed to the flooring. The glass top (300 mm H) to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG, The rate shall include ant termite treatment all hardware fitting, adhesive beading (12mmx75mm) etc., to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition nothing shall be paid extra separately unless specified. Plywood century, greenply, duro, archid or equivalent make

Wooden Solid full height Partition:-Providing and fixing of full height partially glazed partition 75mm thk till roof height made on frame work of 18mm BWP PLY GRID SIZE 500MMX500mm horizontally and vertically with 12mm thk ISI grade premium quality BWR plywood on both sides, plywood should be finished with 4mm thk veneer/1.0 mm thk laminate as per Drawing. The framework shall be secured to the flooring and celling. The glass to be fixed with the help of wooden beading finished with synthetic enamel paint satin finish as per detail DWG, The rate shall include ant termite treatment all hardware fitting, adhesive beading (12mmx75mm) etc., to The rates are inclusive of all item including lead &lift and necessary to complete, the item in good condition noting shall be paid extra separately unless specified (Plywood century, greenply, duro, archid or equivalent make)

Door Paneling :- Providing & fixing for paneling on walls /column /beam etc. by using dimensionally stable and wrap free BWP plywood/blackboard/MDF(IF Req) sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall should properly fixed with M seal compound and rawl plug. Finally all exposed surface finished with 1.00 laminates/The job shall be included all material labour wastage ect complete plywood marine grade IS 710,work complete as per instruction of architect. (Plywood century, greenply, duro, archid or equivalent make)

Providing and laying multi charge full body matt finished vitrified tiles of sizes having water absorption less than 0.05% and conforming to is: 15622 of make :-Rak Nitco premium quality laid on 20mm the base of cement mortar 1:4 (1cement” 4 Sand) in all shapes and design including epoxy resins matching combined with a filler power grouting the joint work complete as per direction of eng in charge Tile size (600mmx1200mm) and (9-12 mm Thk)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Supplying and installation automatic stainless steel Body 3600 wt hand dryer Ac 220-260 hot/cold waves auto cut off within 60 sec and 4500 RPM speed, waterproof product With touch free infra red activation wall mounted

Supplying and fixing 8 mm thickness polished Mirror glass fixed on wall with SS 35X5mm bolt and Mirror glass all edge finish curved shaped with Designing itching Work (if reqd.) , work complete as per instruction of Eng in charge. (Make-Saint-Gobain, Hosley)

Supplying and installation of 65” interactive flat panel, infrared Technology,i5/4GBRAM/256 SDD Hard disk with video conferencing through UHD camera, Interactive whiteboard, MS office professional &windows 10 professional, With 360 D HD zoom camera inbuilt (Make-ViewSonic / LG/ SAMSUNG)

Conference Table:- Providing and fixing of veneer finish conference table have top 30-35mm thk after finish &600 mm deep table top made by 19mm thk BWP ISI Grade plywood, the table top fixed on the 300mm deep and 725 mm high veneer finish wooden cabinet made by 19mm BWP plywood. Cabinate shall have vertical members of 19mm thk BWP plywood at intervals of 900 mm c/c or as per instruction.Table shall have inner lining of approved colour 1.00mm thk decorative laminate. Table shall have provision for cable manager &raceway to accommodate wires for PA System networking ,electrical ect .Side of the table top shall be finish with acrylic solid surface& veneer as per approved. All wooden & veneer surface shall be duly melamine polished finish/Table should be measured in running length only from one side. All work shall be carried out as per instruction of Architect Veneer/laminate make: century/Archid plywood. (furniture Greenguard/Bifma certified co)

Magnetic White Marker board-providing and placing Magnetic White Marker board as per design (size 750x900mm)

DUSTBIN Proving and fixing of stainless steel body dust bin height 450mm-900 and dia 300mm-600 aisi 302 grade

Providing fabrication installation of wooden false celling in perfect line and level having base frame made up to 18 mm Plywood laminated with 1 mm thk MICA,Providing grooves as per drawing,making required opening for fixing of the light fiture and finishing the veneer surface with base frame suspended with MS angle of sz 25x25x3mm fixed to soffit with help cleat anchored with rawl plugs of required size including necessary SS Screws adhesive ect required for fixing pasting all complete and direction of eng in charge

Providing, fabricating and fixing 12 mm thk clear toughened glass with edge polished and prepared for patch fitting with required designs approved by eng in charge in frosting& ehching dimension as shown in drg,for entrance door and fixed glazing. The entrance glass door shall be fitted with over panel patch top patch and bottom rail with locking system.the fixed glazing shall be supported by connecting profiles ect all the patch panels connectors and other accessories should be SS brush finish.All handles floors spring shall be of Dorma or equivalent .All joint shall be sealed with silicon based seal and made water tight ect.

Providing &fixing vinyl clear printed graphic film fixed using film adhesive

Providing and fixing of LED planter Model-9159 with L-24”.W-24” H-30” size 01) Made with 100% Virgin UV stablished LLD poluthilene 02) Made from durable weather resistant resin with high temperature tolerance that offer Zero maintenance and so rust and no stain3) it is made up of environment frirndly composite4) 100% recyclable material with colour option warm white pure white & RGB Make-SUPREMO/UF/SERIONO

Providing and fixing of LED planter MODEL-9152 with L-18”.W-18”,H-18” Size 01) Made with 100% virgin UV stablished LLD polythilene 02) Made from durable weather resistant resin with high temoerature tolerance that offer Zero maintenance and no rust and no stain 03) it is made up of environment friend composite 04) 100% recyclable materal with colour option warm white pure white &RGB Make-SUPREMO/UF/SERIONO

Providing and fixing Ist class Teak wood/rubber wood skirting wherever required as per carved profile of size 75mm widex15mm thk duly melamine polished .Fixing detailed as per instruction of Architect

Providing and fixing in position imported carpet of approved shade and brand 550 GSM PILE WT,Gross WT 1800 gms Graphic loop pile having thickness 4 mm-9mm with primary backing of polypropylene woven sect and secondary action back complete as per instruction,specifications and as per the direction of eng in charge,carpet and underlay to be installed with standard fevicol/Dunlop adhesive.The flloring to be installed agency or as approved with eighteen mounth warranty from principal from any manufacturing defects.The installation to be in line and level including the cost of all material,disposal of debris ect,Complete to the satisfaction of eng in charge( inclusive of profile) Basic rate of carpet –RS 75 PER SQ make unitex

Performer model : 2 Seater : 1200 (w) x 945(d) x 760mm(H) Table desk Height-Front End 760mm Ht, User end 740 mm Ht, Angle Slant of 3 deg Provided for better utilisation and writing comfort of the user. Table bench Height 440 mm Ht and Bench Seat & Seat back Angle of 7 Degree facilitates. Wooden Sizes & Specs : Pre-laminated particle board confirming to IS 12823 with pvc edge banding of below sizes, Desk Table Size = 1200(W) x 400(D) x 18mm(T) - OSL Particle Board, Desk Seat Size = 1200(W) x 330(D) x 18mm(T) - OSL Particle Board, Seat Back Size = 1200(W) x 170(D) x 18mm(T) - BSL Particle Board, Shelf Size = 1200(W) x 300(D) x 18mm(T) - OSL Particle Board. Under structure Specifications: nos of Specially designed Oval or Square MS Pipe legs to support desk, book shelve, seat and back made of 30.5-25.5 x 16 mm size with 2.0 mm wall thickness in powder coating finish with necessary Leg Brackets for stability and rigidity. 4 nos of tie members with flanges of size 825(W) x40(D)x35 (H) x1.6mm-2.00mm Thick CRCA welded with end Bracket of 3mm thk to Join with Legs, desk, seat and back. 1 nos of perforated CRCA shelve covers of size 850 W x 200 H x 0.8mm thickness with powder coated finish.

Providing and fixing sound absorptive wall paneling in profile with GI hat furring channel 22-25 depth with grid size 600x600mm on wooden section(Extra fixing of member as per requirement) .The entire wall paneling will be finished with 350-400 gsm PILE WT carpet/fabric(Colour,shade,texture,Make approved by eng in charge) on 8mm ply paste with approved adhesive.Note: The junction of the carpet should meet evenly with accurate workmanship and to the satisfaction of the eng in charge .

Providing and placing lab working station , working station should be of size 1800 mm x 1000 mm x 750 mm made out of 50 mm x 50 mm (isi ) tubular pipe frame work , frame work cladded with 12mm thk 100 % bwp plywood on both sides , all inside surface finished with 0.8 mm plain white laminate. Lab working station shall be of 18 mm thk shelves , and shutter made of 18 mm thk 100 % bwp plywood . All exposed surface finished with 1.0 mm plain or texture laminate. Lab working station top to be finished with 25 mm thk selected granite or composit marble ,granites or composit marble all edges shall be finished with moulding finish Work completed as per the instruction of architect. (furniture Greenguard/Bifma certified co)

Supplying revolving 3 legs shf-30 powder coated stool

Lexicon 2 Lay in aluminum perforated power coated tile celling system with technical panel:-Providing &fixing of Lualon @lay in tile perforated false celling on 24 mm T frame work of module 600x1200mm,600x600manufacture out of 0.70 mm thk aluminum alloy. When tiles are perforated it shall be 2.0 mm dia 5.5mm c/c giving 16% open area non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption with NRC up to 0.70.The tile will be manufacture on advanced equipment which included several leveling. The tile end shall be raised upward by 8mm and bend outward to lay the tile in frame work. The tile shall be polyester based, powder coated in white colour with square edge. Grid system for fixing ceiling tile shall comprise of Tees. The 24mm main tee runners shall be suspended at an interval of 1800mm centre to centre. The 24mm cross tee runner shall be suspended at 600mm centre to centre and further supported with 24 mm cross tee at 600mm centre to centre with interlocking arrangement to form grid of 600mm x 600mm .The main tee shall be supported by means of 4 mm GI rod from slab/roof.The suspension shall be provided at 1200 to 1500mm centre to centre Luxalon Technical panel with lay in type profile of size 150mmx1775 mm made out of 0.70 mm thk unperforated aluminium alloy.

Providing and fixing of vista/marvel or equivalent vertical dust Proof roller blinds of approved shade texture fabric (opaque / eclipse) with aluminium gear and rolling arrangement. Duly power coated with all necessary mechanism complete in all respects and properly finished to the satisfaction of eng in charge . The job shall include all material labor, wastages etc complete.

Supplying and fixing 5mm thickness polished mirror glass fixed on wall with SS 35x5mm bolt and mirror glass all edge finish curved shaped,work complete as per instruction of engg in charge

Providing and fixing glass shutter or MS sheet shutter shelf with decorative laminate as per detail given in interior drawing 6.9" to 7" approx height shelf as per design to be made 50x50m tubular pipe fixed in vertically position shelf made by 50x50mm outer pipe and 25x25mm fixed c/c and fixing MS sheet ,applying primer coat of ready mixed red oxide on tubular pipe frame work finally all exposed surface covered with 18mm BWP ply and finished with 1 mm thick laminate .The front openable shutter to be made 5.00mm thick plain glass or dotted steel sheet fixed on 50x50mm tubular pipe frame thick frame ,the unit to be fixed or movable as per site requirement or direction of incharge ,complete in all respect the unit to be measured in sqm from front side.

Supplying S.S 304 Grade Full Dissection table of size 1975mm x 700mm x 900mm

Supplying S.S 304 Grade Half Dissection table of size 1140mm x 660mm x 900mm

Supplying,installation and commissioning of S.S three track dead body freezer ,voltage 220v and 50hz frequency ,10 to 24 degree temp. Note:- The Bidder Shall quote his own rates for item rates 1 to 43.