MP Laghu Udyog Nigam Limited Tender

Providing and fixing Dorma TS-68 door closure with standard arm EN2/3/4, necessary accessories and screws etc. complete.

Providing and fixing Planters with plant and pabble - any size made up of FRP (Fiber Reinforce Plastic as per selected design detail.

Providing Euro prafic desing , louvers mdae of MDF Material , light weight water reststant leamate & borer rststant with approved colour smooth laminate with plant finish portst fernig dulyfixed with hat glue on both surface.

Providing decoratve eassa sheet with self desighing with compressed sheet made of corbonete onateradl made in korea light weight water reststant levemit made in korea light weight of borer resestemt with approval colour duly finished ready to use on vertical fixed with not jlue or both surface.

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH )

Dismantling & Reassembling of steel work manually/ by mechanical in built up sections icluding dismembering, re membering, etc. complete as per direction of Engineerin-Charge.

Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid for separately) 18mm thick commercial ply conforming to IS: 1328 BWR type.

Providing and fixing Planters with plant and pabble - any size made up of FRP (Fiber Reinforce Plastic as per selected design detail.

Providing, fixing and making of Wall painting of required pattern of design. As per drawing and as directed by Engineer in charge etc complete.

Providing & fixing of plane washable wall paper high resolution including all fittings with wastage.(Spin Décor / marshell / Green)

Repairing of Sofa :- Repair of sofa chair with polishing and tapesty & complete finish.

Providing and fixing of storage units (Veneer finish) (450 mm wide) - Providing and fixing at site file / storage cabinet made up of 18MM BWP ply with 4mm thick veneer as per drawing. All shelves and partitions to be made up of 18MM BWP ply and Pallah to be made up of 12mm. thick BWP ply fixed with hinges of approved make. All exposed edges to be finished with 1st quality teak wood beading to be melamine polished / PU coating and all inside surfaces to be finished with 1.00mm laminate. The cost is inclusive of all materials accessories, SS handles, lock, labour, etc. complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of Conference Hall /Marketing room Table 600mm. wide made of 18MM BWP ply finished with 1 mm thick laminate inner and outer side. The table top front will be 24mm. thick with teak wood beading. Provision for foot rest, wire manager shall be made. all exposed edges to be finished with first quality Teak wood beading which is to be melamine polished/ pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

HIGH BACK CHAIR : The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards (HAWORTH/ HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/ HOF. MAKE )

MID BACK CHAIR : The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm, (H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest is fixed . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards (HAWORTH/ HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/ HOF. MAKE )

Table counter, 600 mm wide - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates as required specified by Architect and inner surfaces finished in 1.0 mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Table counter, 450 mm wide - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates as required specified by Architect and inner surfaces finished in 1.0 mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

HIGH BACK CHAIR : The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards (HAWORTH/ HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/ HOF. MAKE )

(CATEGORY -III) INTERACTIVE PANEL SIZE 65" OR HIGHER, 3GB RAM, 32GB STORAGE , 4MM TOUGHENED AND ANTIGLARE GLASS AS PER BID SPECIFICATION (LG MAKE)

Supplying, installation & testing of Elite FHD Premium Series 12X PTZ CAMERA for video conferencing with 1/2.7” high quality, 2MP sensor, 1920x1080 @ 60fps (uncompressed), 12x Optical and 16x Digital Zoom, 72.5° Field of View, , 255 Presets USB 3.0, HDMI, RJ45,3G-SDI, USB 2.0 Make : Peoplelink/Kramer

Supplying, installation & testing of Quadro Microphones for Video conferencing with inbuilt 4 Uni-Directional Microphone, Wired Type, USB, 3.5 mm & POE Interface, 100Hz-22000Hz ( Mic), 100Hz-22000Hz (Spkr) Make : Peoplelink/Kramer

(CATEGORY -III) INTERACTIVE PANEL SIZE 65" OR HIGHER, 3GB RAM, 32GB STORAGE , 4MM TOUGHENED AND ANTIGLARE GLASS AS PER BID SPECIFICATION (LG MAKE)

providing and Fixing of Business Conference System Supply voltage AC110Vor AC220V (default settings) Central Control unit must be supported Max conference microphones 800 Frequency response 20-20000Hz Signal-to-noise ratio 80dBA Dynamic range 85dB Audio crosstalk 70dB Total harmonic distortion 0.05% Original input: 6.3 mm balanced Signal strength: 0.775 V Inputs 1 Port of RS232 1 X RCA Aux Audio 1X RCA Aux inut Along with Aux Volume Control Controler Should have 1X XLR Balce out along with Volume Control Controler Should Supported Ring Cabling Formate Approved Make - oliver System / Berdynamics / Clear one / Sennisher / Shure

Providing and Fixing of Digital Chairman Unit Should Have Output frequency response 50-16000Hz Earphone load 16 Ω Earphone volume 10 mV Earphone output φ 3.5mm stereo jack Max. power consumption 1.65W Connection Cat 5 or 7P-DIN dedicated cable with buckle Unit Should have Inbuilt Speaker With Volume Control on Top of base Chairmaan Unit Should have 2X2 Digital Display Unit Voting option Approved Make - oliver System / Berdynamics / Clear one / Sennisher / Shure

Providing and Fixing of Digital Delicate Unit Should Have Output frequency response 50-16000Hz Earphone load 16 Ω Earphone volume 10 mV Earphone output φ 3.5mm stereo jack Max. power consumption 1.65W Connection Cat 5 or 7P-DIN dedicated cable with buckle Unit Should have Inbuilt Speaker With Volume Control on Top of base Chairmaan Unit Should have 2X2 Digital Display Unit Voting option Approved Make - oliver System / Berdynamics / Clear one / Sennisher / Shure

Providing and Fixing of Full Duplex High Definition Audio signal processor Frequency Range : 30 Hz. to 16KHz. Automatic Echo Cancellation : Yes Automatic Gain Control : Yes Dynamic Noise Reduction : Yes Noise Supression : Yes Power Supply Safety : Power Supply Unit with Short Circuit, Overload and Over Voltage ProtectionSMT SMT Circuit : Surface Mount Technology (SMT ) Circuit Efficiency : High efficiency of ~90% Current : Very low quiescent current. Can run on inverter. Circuit : Technology (SMT) Circuit Integrated Self-Protection Surface Mount Frequency lock : Quartz-locked frequenc Approved Make - Peopel Link/ Bi Amp / BSS

Provding and Fixing of System Interconnect

Installtion Testing and Proggraming Chaarges

SITC of Large Format Display :Size- 55" , Resolution 3,840 X 2,160 (UHD) , Backlight Unit Type Direct, Brightness (nit) 330, Audio Output: 10W + 10W Speaker ,System : 2.0 ch; Broadcasting System : TV Reception DVB-T2/C/S2 ; Interface Side : HDMI In 3 (2.0), Headphone Out (Phone Jack Type), Rear: USB (2.0), RF In (2), Digital Audio Out (Optical), External Speaker Out(3.5mm phone jack), RJ45 (Usage Purpose, LAN); Power Type : Built-In Power.

Supplying, Installation, testing & commissioning of 4K HDMI Switcher with 4 Nos. Of HDMI Input and 4 Nos HDMI Output. Make : Aten/Kramer/Matrix

Supplying, installation & testing of 6 x 2 audio matrix switcher that includes multi−channel DSP, AEC (Acoustic Echo Cancellation), HDMI de−embedding, and class compliant USB audio interface, input : 2 HDMI: On female HDMI connectors 4 Balanced Mono Audio: On 3–pin terminal blocks 1 Unbalanced Stereo Audio: On a 3.5mm mini jack, OUTPUTS : 1 Balanced Stereo Audio: On a 5–pin terminal block connector 1 HDMI: On a female HDMI connector, PORTS : 1 USB Audio: On a female mini USB–B connector 1 RS-232: On a 3–pin terminal block 1 Ethernet: On an RJ–45 female connector, VIDEO : Max Bandwidth: 18Gbps (6Gbps per graphic channel) Max Resolution: 4K@60Hz (4:4:4) Compliance: HDMI and HDCP 2.2 USER INTERFACE : Indicators: Power and audio port status LEDs Controls: Input selection buttons CONTROL : RS-232 : Baud Rate: 115200. Make : Kramer/BSS/Clearone

SITC of SITC Of 16 Channels Mixer With Computer Connectivity: Computer Connectivity: USB (2 x 2) Faders: 16 Faders Inputs - Mic Preamps: 8 x XLR/TRS Combo, 2 x XLR, 4 x TRS Phantom Power: 12 Inputs - Line: 4 x TRS Inputs - Other: 2 x RCA (Stereo) Outputs - Main: 2 x XLR, 4 x TRS Outputs - Direct: 4 x TRS Outputs - Other: 1 x TRS (Footswitch)USB: 1 x Type B EQ Bands: 3-Band, Sweepable Mid Effects: Yes Aux Sends: 1 x Pre, 1 x Post/Pre, 2 x Post Send/Return I/O: 4 x TRS (Send) Busses/Groups: 4 x Groups Headphones: 1 x 1/4"OEM Arthurization Required As per spacification and as required

SITC of Wireless Lapel Mic with Adjustment Range Transmitter THD, total harmonic distortion ≤ 0.9% Pick-up pattern cardioid Signal-to- noise ratio ≥ 103 dBA RF output power 10 mW Switching bandwidth up to 24 MHz Operating time approx. 10 hrs Output voltage 1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Frequency 8 frequency banks, each with up to 10 factory-preset channels Sensitivity 3 μV at 52 dB(A)rms S/N As per spacification and as required OEM Arthurization Required

SITC of 32 U Floor mounted Equipmenr Rack With All required accessories Including Cluster Wheels.

SITC of 18 U Floor mounted Equipmenr Rack With All required accessories Including Cluster Wheels.

Providing & Fixing of wall paneling 18.0mm thick commercial ply including hardware with complete finish ISI Make.

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports 10/100/1000) ] Make: D-link/Cisco Note:- The Bidder Shall quote his own rates for item rates 1 to 42