MP Laghu Udyog Nigam Limited Tender

High back chair: The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards MAKE:- (HAWORTH/ BONTONE / HERMANMILLER /GODREJ /BTF /HOF )

Mid back chair: The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm, (H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest is fixed . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards MAKE:- (HAWORTH/ BONTONE / HERMANMILLER /GODREJ /BTF /HOF )

Two seater Sofa - Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in the module of two seater with arms on both face, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Corner Table480x485x400 - Providing and placing corner table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick toughened glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing Pristine white finish UPVC sliding window three track with s.s. mosquito net made out of rigid thermo vinyl polymer (RTVP) Material & must be colorfast and confirm to BS: 7413 code ,BS: 7412 code & BS EN12608 code & should pass test of "Classification-P". For ignitability & class-I' for surface spread of flame as per BS: 476- Part 7. The profile with multi chambered construction the nominal will thickness of the frames is 2mm. the outer frame size is 85 x45 mm. the roller shutter frame is 50x 40mm. and handle shutter frame is 50x40mm. sliding track is made UPVC profile which is the part of outer frame for smooth movement of shutter sliding roller assembly consists of nylon roller of zinc alloy casting body gaskets are made of ethlye nepropolenedienemer (EPDM) the window system are prefabricated in factory under standard specification all the corners outer frame and shutter are fusion welded under pressure to a predetermined temperature and time as per the specification and design the structure material and the track frames duly fixed with outer frame/C ball bearing Rollers of superior qulaity, locks neoprine weather strips x5mm. thick clear float glass of good quality and make complete as per direction of engineer in charge duly fixed in wall with bolt and nuts all lead lift carting wastage necessary scaffolding upto floor V th level etc. complete. (Finesta /deceunihck company.)

Lock - Providing and fixing bright finished mortice latch and lock ISI marked with six lever and a pair of anodised(anodic coating not less than grade AC 10 as per IS:1868 aluminuium lever handles with necessary screws etc complete. Best make of approved quality.

Providing and fixing Satin stainless steel finish 400x16 mm sliding door bolts with nuts and screws etc. complete.

Providing and fixing Satin stainless steel finish 600 mm and 32mm dia Handle H Type with nuts and screws etc. complete.

Providing and fixing Dorma TS-68 door closure with standard arm EN2/3/4, necessary accessories and screws etc. complete.

Providing and fixing Planters with plant and pabble - any size made up of FRP (Fiber Reinforce Plastic as per selected design detail.

Providing & fixing EURO pratik products of DECORIS series/CASA Series/3D wall art/ Designer wave board on 8mm thick ply (Century /Archidply/ Duro) on framework 50mmx50mm thick sal wood sections/second grade TW, placed at 600mm c/c in both the directions as per detail drawings. As directed by engineer in charge and architect.

Providing & fixing of Corian sheet for any surface design including all accessories and adhesive materials etc. complete in all respect as per direction given by Engineer in charge. (LG / SAMSUNG / DUPONT)

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

Providing & fixing of imported 3D wall paper with high resolution including all fitting with wastage (Spin Décor / marshell / Green)

Providing and fixing of zebra roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/WINDOW TECH )

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports (10/100/1000) ] Make: D-link/Cisco

Two Bay Compactor with Drive Main Unit : Construction of Body should be Rigid Knock Down made out of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block uilding should consist of 1 Main unit. Each unit should comprise of 5 loading levels formed by 4 nos. adjustable shelves. Body units must be bolted to undercarriage. The System Height from ground should be 1900. The body including shelves must have antirust surface treatment & powder coated with epoxy polyester powder oven baked with a controlled temperature of 180 deg.C to 200 deg.Celcius. The material must be processed with an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off oven treatment before Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film having thickness of minimum 50-60 microns. The testing of powder coating finish should be done for various physical & chemical properties as per IS:101. The Shelf is made of 0.8 thk CRCA steel conforming to IS:513 Gr.D or DD. It's max load bearing capacity is 70 Kg uniformly distributed per shelf Shelves should be mounted on support brackets & shelf level can be adjusted. Movement of units should be mechanically through a PU Drive wheel and 'Sprocket- Chain-Tensioner' arrangement mounted rigidly onto body side. Each movable undercarriage must be provided with Rollers on shaft for driving, antifriction ball bearings for rolling and guiding between channels & IT' section. Centralized locking arrangement should be provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on 1830D×1830W×1900H

Two Bay Compactor with Drive Main Unit : Construction of Body should be Rigid Knock Down made out of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block uilding should consist of 1 Main unit. Each unit should comprise of 5 loading levels formed by 4 nos. adjustable shelves. Body units must be bolted to undercarriage. The System Height from ground should be 1900. The body including shelves must have antirust surface treatment & powder coated with epoxy polyester powder oven baked with a controlled temperature of 180 deg.C to 200 deg.Celcius. The material must be processed with an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off oven treatment before Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film having thickness of minimum 50-60 microns. The testing of powder coating finish should be done for various physical & chemical properties as per IS:101. The Shelf is made of 0.8 thk CRCA steel conforming to IS:513 Gr.D or DD. It's max load bearing capacity is 70 Kg uniformly distributed per shelf Shelves should be mounted on support brackets & shelf level can be adjusted. Movement of units should be mechanically through a PU Drive wheel and 'Sprocket- Chain-Tensioner' arrangement mounted rigidly onto body side. Each movable undercarriage must be provided with Rollers on shaft for driving, antifriction ball bearings for rolling and guiding between channels & IT' section. Centralized locking arrangement should be provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on 1830D×915W×1900H

Providing & Fixing 300mm dia Analog wall clock Make: Ajanta/Oriva.

Providing & Fixing of 2'x3' size doormat Non-Slip Commercial Rubber Floor Foot Mat | Waterproof S-Shaped 4 MM Thick Hollow Doormat,Corridor Tiles Carpet Note:- The Bidder Shall quote his own rates for item rates 1 to 24