MP Laghu Udyog Nigam Limited Tender

Providing and fixing clear float glass ( having U value less than 3.75 ) to partitions / window or as directed including polishing of edges and filling of gaps with silicon sealent ,epdm gasket of suitable sizes making holes etx as required 5 .0 mm thk

Providing and fixing ornamental Architrave carved out at superior quality A grade teak wood baton For fixing over door frames and window frames to conceal the construction joint of wall plaster & TW frame.The Rates shall include all material, labour,cost of french polishing etc. complete. 100x40 mm

Providing and applying new or old surface melamine polish of ( MRF , vam Organics , asian ) after preparing e the surface smooth by sanding with Emery Paper No.180 followed by fine sanding with Emery No. 320. Applying wood filler ( shellac ) to smoothen minor unevenness of the surface and allow it to dry for 1-2 hours. Remove excess filler by Emery Paper No.320 to smooth finish.Apply one coat of NC Natural Wood Finish clear sealer after mixing Base and Hardner with Thinner ap per manufacturers recomendation . Allow it to dry for 6-8 hours. Scuff it with Emery Paper No.320 to remove raised grains. If pores are still not filled, apply a second coat and follow the same step. Smooth sand the sealer coat after drying.Select the finish coat available in Glossy or Matt, Semi-Glossy finish can be prepared by mixing Glossy and Matt in desired proportions.Mix thoroughly Base and Hardener in recommended mixing ratio and thin down with thinner. Apply two coats. Allow 2-3 hours between coats. Allow the final finish coat to dry overnight. Rate to include for all tool, labour scaffolding as reqd. complete as directed.

Supplying and fixing in position vertical blinds made with 100 mm wide fabrics of approved quality, make and shade assembled on top aluminium frame (33 mm x 28 mm x 1.2 mm) with powder coated (approx 50 micron) with high quality nylon runners with auto clutch mechanism, stainless steel master runners, stainless steel fitter chains and PVC end covers. The bottom end of the fabrics are suspended with a weight which are to be connected by link chains. All complete as per manufacturer's specifications.

Providing and supplying egro type visitor chair of approved brand.

Providing and supplying complete computer table size L-1300 mm W-600 mm, H- 750 mm (frame tubulas colled rolled.)

Providing and supplying egro low back revoloving chair size 830 x 930 mm depth 600 mm and Wide 500 mm seal Light 450-550 mm epoxy nylone base.

Providing and supplying premium chair egro Hi-back size total H-1070-1190 depth 685 mm, width-590 mm seal hight 425-510 mm S-pring nilone base for stability Twin Wheel heavy duty caston fan easy mobitily.