MP Industrial Development Corporation Limited Tender

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor. (i) 16sqmm 4 core armoured. (MPPWD, SOR, EW,01.01.2024) item no.41.1.10.3/pg no.114

Laying of one number armoured /unarmoured power cable 1.1KV grade of size not exceeding 25 sq. mm direct in ground including excavation in all soil/ murrum /soft rock, sand cushioning,protective covering and refilling the pit etc.as required. (MPPWD, SOR, EW, 01.01.2024)item no.41.15.1/pg no.123

Laying of one number armoured /unarmoured power cable 1:1 KV grade of size not exceeding 25 sq. mm in the existing RCC hume/stone ware/G.I. pipe/DWC Pipe/ surface in existing trench as required. (MPPWD, SOR, EW,01.01.2024) item no.41.15.7/pg no.124

Providing and fixing 4.87mm (6 SWG) dia. G.I. wire on surface or in recessed for loop earthing as required. (MPPWD, SOR, EW,01.01.2024) item no.37.18/ pg no.89

Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs.burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job. (i) 90 watt, color temp 3000-6500k as required (MPPWD, SOR, EW,01.01.2024) item no.31.13.3/pg no.77

Earthing with G.I. earth pipe 4.5 metre long and 40 mm dia with masonry encloser in cement mortar, cover plate having locking arrangement on the top etc. (but without charcoal or coke and salt) complete as required. (MPPWD, SOR, EW,01.01.2024) item no.37.1/ pg no.88

Add extra for using salt and charcoal/coke for pipe earth electrode as required including excavation & refilling. (i) Excavation 4.5 m by manual labour (MPPWD, SOR, EW,01.01.2024) item no.37.2/ pg no.88

Supplying and erection of water tight terminal box made of PC-GFS (polycarbonate),IP 66 /IP 67 (cable entry systems LES) in accordance with IEC 60670-22, resistant to weather influences (UV due to solar radiation, protected against rainwater, temperature resistant, impact resistant, etc. insulation voltage 1000 V a.c./d.c., wall thickness of the bottom part 2 / 2.7 mm of required size suitable for kit kat/MCB/switch including 2 nos. pole clamp of M.S. flat iron size 32x3mm, nut and bolts, excluding the cost of the kit kat/MCB/Switch, 4 Pole epoxy connector nut & bolt type, 30Amp, 500Volt complete as per specification as mentioned below.Water tight terminal box (polycarbonate).(i) (205x255x112)mm (MPPWD, SOR, EW,01.01.2024)item no.34.14.4/pg no.134

Centering and shuttering including strutting, propping etc. and removal of form work for : (i) Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. item no.4.3.1 (MPPWD, Building SOR Vol.1,01.01.2024)item no.4.3.1/ pg no.41

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : (i) M- 10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate) (MPPWD, Building SOR Vol.1,01.01.2 024)item no.4.1.1.4/pg no.40

Supplying & installing G.I. pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries/fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc. complete in an approved manner as required to complete excluding cost of excavation/dismantling & other finished masonry Item complete. (i) For "B' Class pipe ISI Marked (IS-1161-68) (100mm Dia) (MPPWD, SOR, EW,01.01.2024) item no. 41.12.1.9/pg no.122

Prima coat over new steel and other etallic surface with red oxide zinc chromide paint complete with supply of material labour etc.including preparation of surface. (MPPWD, SOR, EW,01.01.2024) item no.34.4.2/ pg no.84

Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface. (MPPWD, SOR, EW,01.01.20 24)item no.34.4.3/ pg no.84

Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @3.84 kg/10 sqm). (MPPWD, Building SOR Vol.1,01.01.2024)item no.13.50/ pg no.476

Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. (MPPWD, Building SOR Vol.1,01.01.2024)item no.13.51/ pg no.476

Supply, fixing, testing & commissioning wall/floor mounted LT panel primer coated with powder coated paint & provided with reqauired gasket for dust/vermin proof with degree of p;rotgection IP42 suitable for 415Volt 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet up to 2mm thick (1.6mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Meter, Volt Meter, selector switches, frequency Metre, phase indicating lamp, Energy Metre complete including cost of busbar supoorts, detachable cabel gland plates, 2 earthing tgerminals, internal wiring & fixing of separately supplied MCBs, MCCBs, ACB, Panel mounted changeover switch/SFUs, etc. as requried but exlcuding cost of busbar strips, Ampere Metre, Volt Metre, selector switch as per approved design and specificzation. (MPPWD, SOR, EW,01.01.2024)item no.29.27/ pg no.68

Supply and fixing L.T. Panel accessories of approved make in exisiting LT panel including connections etc. as required as per specification. (MPPWD, SOR, EW,01.01.2024)item no.29.28/ pg no.68 I/ 29.28.1 Digital Ampere Meter with CTs with selector switch

29.28.2 Digital volt Meter with Selector Switch & HRC Fuse

29.28.3 Frequency Meter

29.28.5 Copper Busbar strips with PVC Sleeves

29.28.6 Aluminium Basbar strips with PVC Sleeves

29.28.7 LED Lamp indicator