Get tender documents at just ₹200 per tenderKnow More
Search made simple for latest tendersNo hidden charges. No keyword restrictionsExplore Our Plansor Pay Per Tender

Military Engineer Services

  • Opening Date

    13 Dec 2018

  • Closing Date

    17 Sep 2019

  • Tender Amount

    ₹ 22,34,00,000

  • EMD

    ₹ 15,00,000

Are you Looking for Joint Venture Partners, Contractor Consortium, Project Financiers for this tender?
We will help YOU to find the right match for FREE!
Summary

Provn Of Traverses For Sheds And Re-construction Of Existing Sheds Alongwith Provn Of Igloo Sheds At Af Amla.

Documents
Are you looking for Materials and Services for this tender?
We will help YOU to find the right partner for your needs for FREE!
BOQ Items
ItemQuantityUnitsRateAmount
... more
Lumpsum price worked out by the contractor for “BUILDINGS AND STRUCTURES” as listed in Sch 'A' part I above/below the lumpsum price of Rs. 15,69,95,120.00 as inserted by MES for Sch ‘A’ part I on srl page No. 31
1LUMP SUM- -
... more
Lumpsum price worked out by the contractor for “SITE CLEARANCE/DEVELOPMENT AND EARTHWORK” as listed in Sch '‘A” part II above/below the lumpsum price of Rs. 49,78,245.52 as inserted by MES for Sch ‘A’ part II on srl page No33
1LUMP SUM- -
... more
Lumpsum price worked out by the contractor for “ROAD/PATH/HARDSTANDING" as listed in Sch ‘A” part III representing above/below the lumpsum price of Rs. 45,58,259.70 inserted by MES for Sch ‘A’ Part III on srl page No.35
1LUMP SUM- -
... more
Lumpsum price worked out by the contractor for “AREA DRAINAGE/PCC DRAIN" as listed in Sch ‘A” part IV representing above/below the lumpsum price of Rs.14,17,994.12 inserted by MES for Sch ‘A’ Part IV on srl page No. 36
1LUMP SUM- -
... more
Lumpsum price worked out by the contractor for “PROVISION OF LIGHTENING PROTECTETION SYSTEM AND STATIC ELECTRICITY DISCHARGE STRIPS” as listed in Sch ‘A” part V representing above / below the lumpsum price of Rs.5,17,214.69 as inserted by MES for Sch ‘A’ Part V on srl page No.39
1LUMP SUM- -
... more
Lumpsum price worked out by the contractor for “DEMOLITION AND DISMANTLING” as listed in Sch ‘A” part VI representing above / below the lumpsum price of Rs.26,87,294.46 as inserted by MES for Sch ‘A’ Part VI on srl page No. 40
1LUMP SUM- -
... more
Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Sch ‘A” part VII representing above / below the lumpsum price of Rs. 4,69,968.40 as inserted by MES for Sch ‘A’ Part VII on srl page No. 41
1LUMP SUM- -
... more
SCH 'A' PART VIII (MISC B/R & E/M ITEMS)
-- -
... more
(A) HARDSTANDING
-- -
... more
M&L for 300 mm thick WMM in three layers (each layer of 100 mm compacted thickness) confirming to the grading given in Table 400 - 13 and physical requirement as per Table 400 -12 , spread with mechanical means and rolled using 8-10 T vibrating power roller over compacted sub grade surface as specified in clause 406.3.5 on page 134-135 MORT & H complete all as directed.
128X SQM- -
... more
Material & Labour for 20 mm wide expansion joints upto full depth of concrete slab (150mm) filled with pre formed compressibe filler board (Silfex Supreme Base) precut at specified depth, provision of closed cell polythene backup rod 25mm dia (minimum depth over backup rod shall be 14-15mm), 02 coats of priming the vertical side of joints and sealing the joint (Top 12mm) with and using cold applied polyurethane sealant conforming to requirement of BS-5212 type FB and applying masking tape on edge at joint to prevent accidental spillage of sealant and removing the masking tape after sealant is applied. Sealant should have MAF minimum ± 30% and manufacturer's warranty for 10 (ten) years complete all as per manufacturer's instructions all as specified.
4TEN RUNNING METRE- -
... more
Material & Labour for 8mm wide, 22-33mm deep construction joints. 02 coats of priming and providing a backup rod 10mm dia, and sealed with and using cold applied polyurethane sealant (Top 10mm leaving 2-3 mm recess ) conforming to requirement of BS-5212 type FB and applying masking tape on edge at joint to prevent accidental spillage of sealant and removing the masking tape after sealant is applied. Sealant should have MAF minimum ± 30% and manufacturer's warranty for 10 (ten) years complete all as per manufacturer's instructions all as specified.
1TEN RUNNING METRE- -
... more
Material & Labour for 8mm wide, 22-33mm deep dummy joints. 02 coats of priming and providing a backup rod 10mm dia, and sealed with and using cold applied polyurethane sealant (Top 10mm leaving 2-3 mm recess ) conforming to requirement of BS-5212 type FB including 3mm wide saw cut upto 60 mm depth and applying masking tape on edge at joint to prevent accidental spillage of sealant and removing the masking tape after sealant is applied. Sealant should have MAF minimum ± 30% and manufacturer's warranty for 10 (ten) years complete all as per manufacturer's instructions all as specified.
42TEN RUNNING METRE- -
... more
(B) HAZARD DIVISION SYMBOL BOARD
-- -
... more
S&F Hazard division symbol board by using double legged informatory sign board fixed on single frame and meeting back to back on the square pipe. Double sided boards are made. The boards are of high intensity Green/blue or as required color grade retro-reflective sheeting of AVERY DENNISOX made out of 2 mm thick Alco bond/aluminium sheet conforming to IS 736 to be covered with high intensity grade retro-reflective sheeting(avery dennison) of Green/Blue or required colour as per user. The whole is fixed to sheet and fixed with suitable adhesive to alco bond/alluminium sheet painted with epoxy paint to standard make, fixed to structural sheet frame work of MS pipe of size 35 x 35mm square pipe with nuts, bolts/rivets ensuring safely against removal of plates. The lettering is computerised cut of high intensity grade white sheetig (Avery Dennison) and mechanically fixed on this board of Green/Blue colour or required colour. Then these two separate boards fixed back to back on single frame are fixed to two vertical posts of 50mm square pipe 2.50 mtr long to be painted in black white alternative bands of 25cm height with synthetic enamel paint complete in all respect. This boards on single frame are fixed throught PCC 1:4:8: including excavation in post hole. The size of board is 1.50m x 1.50m.
22EACH JOB- -
... more
S&F double legged informatory sign board fixed on single frame and meeting back to back on the square pipe. Single sided boards are made. The boards are of high intensity Green/blue or as required color grade retro-reflective sheeting of AVERY DENNISOX made out of 2 mm thick Alco bond/aluminium sheet conforming to IS 736 to be covered with high intensity grade retro-reflective sheeting(avery dennison) of Green/Blue or required colour as per user. The whole is fixed to sheet and fixed with suitable adhesive to alco bond/alluminium sheet painted with epoxy paint to standard make, fixed to structural sheet frame work of MS pipe of size 35 x 35mm square pipe with nuts, bolts/rivets ensuring safely against removal of plates. The lettering is computerised cut of high intensity grade white sheetig (Avery Dennison) and mechanically fixed on this board of Green/Blue colour or required colour. Then these two separate boards fixed back to back on single frame are fixed to two vertical posts of 50mm square pipe 2.00 mtr long to be painted in black white alternative bands of 25cm height with synthetic enamel paint complete in all respect. This boards on single frame are fixed throught PCC 1:4:8: including excavation in post hole. The size of board is 1.20m x 1.20m.
8EACH JOB- -
... more
(C) LIGHTENING PROTECTION
-- -
... more
Taking down existing Aluminium strips of any size/description from roof/on walls / on poles and removing materials to store for safe custody or for reuse at site or issue under Schedule of credit and making good to the disturbed surfaces to match the existing complete all as specified.(208+270)
478RUNNING METRE- -
... more
Taking down existing GI strips of any size/description from roof/on walls/ on poles and removing materials to store for safe custody or for reuse at site or issue under schedule of credit and making good to the disurved surfaces to match the existing complete all as specified.(520+130)
650RUNNING METRE- -
... more
Material & Labour for Dismantling of old Earthing.(52+16)
68EACH- -
... more
Material & Labour for Dismantling of old angles from roof.(52+16)
68EACH- -
... more
Material & Labour for Dismantling of old air termination rods.(52+12)
64EACH- -
... more
Material & Labour for Dismantling of old test point from walls.(52+16)
68EACH- -
... more
Earthing complete with GI earth plate electrode of size 600 mm x 600 mm x 6mm thick buried directly to ground vertically to a depth not less than 2.25 metre below the ground level with top edge of earth plate not less than 1.65 metre below normal ground level connected to GI strip 32 x 6 mm size and earthing lead protected with 50 mm dia GI pipe light grade filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 metre and connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1:3:6 type C1. using 20 mm graded stone aggregate in concrete pit pre-cast RCC 40 mm thick reinforced with 6 mm dia round at the rate of 75 mm c/c both way with 12 mm dia mild steel plain bar lifting handle 2 nos. funnel with wire mesh 20 mm dia GI pipe light grade watering pipe and frame work complete all as shown in electrical plate no. 3 of SSR Part - I 2009 including testing complete. (GI strip upto 7.5 m length in included in unit rate quoted by contractor and beyond this length the same shall be measured & paid seprately.(36+16)
52EACH SET- -
... more
Material and labour for Earthing complete with copper plate electrode 600 x 600 x 3mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides and incl copper earth strip 20x 3 mm bolted (with copper/brass nuts, bolts & check nuts) and riveted to earth plate at one end and connected to test point terminal block etc, earth strip encased in and including 40 mm bore GI grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25x6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20 mm bore GI pipe medium grade from bottom of earth pit to top of elctrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded curshed stone aggregate and RCC cover complete all specified and shown in electrical plate No. 3 of SSR Pt-I. The scope of work also includes necessary excavation and earthwork. NOTE:- Copper strip beyond 7.5 metres shall be measured and paid seperately. (2 +8)
10EACH SET- -
... more
Material & Labour for fixing GI pipe light grade 40 mm dia not more than 60 cm embedded on PCC including cutting and welding MS sheet 4mm thick of size 50 x 50 mm on one side including making hole of 12 mm dia on MS sheet and providing suitable size nut over the MS sheet for fixing air termination rod all as directed and specified.
90EACH JOB- -
... more
S&F Post insulator epoxy LV type suitable for aluminium strip 25x3mm lightening conductor fixed on wall/roof/pole/floor including screw, gutti complete all as specified and as directed.
2114EACH- -
... more
S&F Post insulator epoxy LV type suitable for aluminium strip 25x3mm lightening conductor fixed on wall/roof/pole/floor including screw, gutti and taking out existing insulators complete all as specified and as directed.
180EACH- -
... more
Supply and lay in trenches/fixed to walls HDPE pipe 40 mm dia light grade for protection of earth strip complete fixing with suitable clamps at regular intervals all as specified and as directed.
10RUNNING METRE- -
... more
INTERNAL ELECTRIFICATION S & F CMRI Certified LED flame proof 60 Watt Bulkhead/ wellgalss luminaire die cast aluminium housing with heat resistant toughened glass recommended for ammunition Shed, IP 65 protection complete with all accessories internally pre-wired and including connecting complete all as specified and as directed make : Crompton Greave/Sudhir.
72EACH- -
... more
S & F CMRI Certified LED flame proof 40 Watt Bulkhead/ wellgalss luminaire die cast aluminium housing with heat resistant toughened glass recommended for ammunition Shed, IP 65 protection complete with all accessories internally pre-wired and including connecting complete all as specified and as directed make : Crompton Greave/Sudhir.
48EACH- -
... more
S & F CMRI Certified LED flame proof 2X16/20 Watt tube light fixer recommended for ammunition Shed, IP 65 protection complete with all accessories internally pre-wired and including connecting complete all as specified and as directed make : Crompton Greave/Sudhir.
48EACH- -
... more
S & F flame proof DB SPN 8 way DB including MCB with rotay type nobe complete all as specified and directed.
8EACH- -
... more
Note: The amount against schedule of credit on serial page no. 52 shall be deducted from the total amount quoted against schedule 'A' while deriving the lumpsum for acceptance.
-- -

CA No. CE(AF)/NGP/AMLA/ of 2018-19 SERIAL PAGE NO.10 APPENDIX ‘A’ TO NOTICE OF TENDER 1 Name of work PROVN OF TRAVERSES FOR SHEDS AND RE-CONSTRUCTION OF EXISTING SHEDS ALONGWITH PROVN OF IGLOO SHEDS AT AF AMLA. 2 Estimated Cost Rs. 2234 Lakhs (At par Market) 3 Period of completion 30 (THIRTY) Months 4 Cost of tender documents in blank Rs 3000/- in the shape of DD/Bankers cheque from any scheduled Bank in favour of GE (AF) Amla and payable at Amla) 5. Website/portal address https://defproc.gov.in and www.mes.gov.in 6. Type of contract The tender shall be based on drawing and specifications (IAFW-2159) and GCC (IAFW-2249) with Schedule „A‟(list of items of works) to be priced by tenderer. The tenderers are required to quote their lump sum amounts for prepriced parts of Schedule‟A‟ and quote rates against items of other parts of Schedule „A‟. 7 Information & Details : (a) Bid submission start date Refer critical dates (b) Last date of bid submission (c) Date of bid opening 8 Eligibility Criteria : (A) For MES enlisted contractors They should satisfy the following criteria :- (a) Residual capacity requirement as in Para 8(C) (a) below. (b) They should have enlistment in class “SS” and Category a (i). (c) They should not carry adverse remarks in WLR of competent engineer authority. (B) For other contractors The firms not enlisted with MES shall satisfy the following criteria :- (a) Residual capacity requirement as in Para 8(C) (a) below. (b) They should meet enlistment criteria of „SS’ Class MES contractors and category a (i), i.e. with regard to having satisfactorily completed requisite value works, Annual turnover, Solvency, working capital, immovable property/fixed assets, T&P, Engineering establishment, no recovery outstanding in any Govt Department, Police verification/Passport etc. Enlistment criteria may be seen in Para 1.4 of section 1 of Part I of MES Manual on Contracts - 2007 (Reprint 2012) as available in all MES formations. These firms shall also submit copy of Police verification from police authority of the area where the registered office of the firm is located / notarized copy of valid passport of proprietor/each partner/each Director. (c) They should not carry adverse remarks in WLR or any other similar report of any authority. Contd…/- CA No. CE(AF)/NGP/AMLA/ of 2018-19 SERIAL PAGE NO.11 APPENDIX ‘A’ TO NOTICE OF TENDER (CONTD….) (C) For All contractors (a) Applicant‟s residual capacity as worked out by following formula should be more than estimated cost of work :- Residual Capacity = (2 x A x N) – B, Where ; A = Maximum turnover in last 5 financial years. N = Period of Completion of contracted (Tendered) work (in years calculated till 2 decimal places) B = Value of balance work in all Govt & Private works. (b) Contractor will not be allowed to execute the work by subletting or through power of attorney holder on his behalf to a third party/another firm except sons/daughter of proprietor/partner/Director and firm‟s own employees, Director, Project Manager. This shall be subject to certain conditions which will be prescribed in the NIT forming part of the tender documents. 9. Tender issuing and Accepting Officer CE (AF) Nagpur 10. Executing Agency GE (AF ) Amla 11. Earnest Money Rs. 15,00,000/- in favour of GE (AF ) Amla Notes: - (a) The contractors enlisted in one class below the eligible class may also apply/bid. Application/bids from one class below eligible class applicants may be considered in the event of inadequate response/bids from the applicants of eligible class.

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.