Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 4,96,760Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_12888_4Tender No
05 of PWD RnB Nubra 2024-25.Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and seating in position with cement mortar 1:3 (1: cement 3: coarse sand), cost of centering, Shuttering and complete. Crushed 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mmm nominal size) including cost of carriage compltete job.
39.81
-
4871.87
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone including cost of carriage compltete job.
5.15
-
9699.06
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.including cost of carriage compltete job.
51771
-
93.22
Centering and shuttering including strutting, propping etc. and removal of form for:
A, Foundations, footings, bases of columns etc. for mass concrete.
412.15
-
288.13
B, Lintel, beams, plinth beams, girders, bressumers and cantilevers.
185.2
-
532.62
C,Columns, pillars, piers, abutments, posts and struts.
385.56
-
694.91
E, Suspended floors, roofs, landings, balconies and access platforms.
279.9
-
701.69
F, Edges of slabs and breaks in floors and walls Under 20 cm wide
191.7
-
256.67
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. a) works upto plinth level including cost of carriage compltete job.
160
-
9142.37
b) All works above plinth level upto floor V level including cost of carriage compltete job.
190
-
10169.49
COMPRESSED STABILISED EARTH BLOCKS (CSEB) in superstructure above plinth level upto floor five level and curing complete in:Cement mortar 1:6 (1cement : 6 coarse sand)Critical parameters related to finished CSEB:- Dry density 1750 kg/m3 Water absorption Less than 15% Dry Compressive strength More than 2.8N/mm2 Wet Compressive strength More than 1.2 N/mm2
Flexural strength (bending strength) More than 0.5 N/mm2
Pitting depth (Erosion resistance) Less than 10 mm Linear expansion of block upon saturation with water Less than 0.10% Critical parametersof soil for CSEB block production:-Sand and gravel More than 65%Silt 5% to 20% Clay 10% to 15% Plasticity Index Less than or equal to12 Phvalue Between 6 and 8 Stabilizer:- Cement Not less than 5% including cost of carriage compltete job.
215
-
6610.16
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of carriage compltete job.
65
-
4576.27
Stone tile work for wall lining upto 10m height with special adhesive likearaldite or equivalent over 12mm thick bed of cement mortar 1: 3 (1 cement: 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade.Granite stone of any colour and shade
20.25
-
4227.96
Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
37.97
-
1864.4
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
First class kail wood
2.1
-
116949.15
Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws 40mm thick.
73.11
-
3781.35
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10 mm
36
-
315.59
Providing and fixing bright finished brass door latch with necessary screws etc. complete 300x16x5 mm
36
-
229.95
Providing and fixing bright finished brass handles with screws etc. complete 125mm
36
-
172.03
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10mm
6
-
68.09
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 100mm
6
-
44.32
Providing and fixing factory made PVC door frames of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and jointed with two numbers of 150mm long brackets of 15x15mm MS square tube, the vertical door profiles to be reinforced with 19x19mm MS
square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using MS screws of 65/100mm size complete as per manufacturers’ specifications and directions of engineer-in-charge
33.27
-
405.5
Providing and fixing 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawin
11.28
-
2822.92
Providing and fixing factory made uPVC Fenista , saint Goblin, NCL VEKA colour as approved by engineer casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).9.149A.5 Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).
111.75
-
10149.78
Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung UPVC windows, of approved quality, with necessary stainless steelscrews etc. as per direction of Engineer-in-charge 200x19x1.9mm
228
-
252.88
Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete.
42
-
158.09
Providing and fixing of traditional Ladakhi Shingstag of height 2 feet in 2nd class kail wood as per drawing complete in all respects (including polishing, cement concrete coping , fasteners which to be paid separately) including cost of transportation, labour, wood, wastage, taxes, profits etc as per directions of Engineer- in-charge
117.29
-
2711.86
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.including cost of carriage compltete job.
348.6
-
124.26
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. including cost of carriage compltete job.
179.34
-
508.82
Prelaminated flooring (Engineered wood flooring) 12 mm thick top layer with foam base layer 4mm thick over cement concrete flooring 40 mm thick
179.34
-
974.57
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement including cost of carriage compltete job.
22.23
-
1910.97
Providing and laying Ceramic glazed floor tiles of size 600x600 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.
27.99
-
1949.15
VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 800x800 mm
147.81
-
1864.4
Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. size of tiles 800x800mm
23.08
-
1949.15
Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite
40.5
-
4546.57
Insulation of wall Providing and fixing (PU) Polyurethane 50mm thick of density 28kg -38 kg/ CU .M in between cavity wall.
479.69
-
1271.18
Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm
253.44
-
2044.14
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineerin- charge.
93.3
-
254.53
Providing and Fixing 15 mm thick densified tegular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting onperiphery walls /partitions on Perimetre wall angle pre-coated steel size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (Spin tone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications,drawings and as directed by engineer-in-charge.
Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non - combustible
as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
27.99
-
1454.95
15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) including cost of carriage compltete job.
955.9
-
306.88
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 1 : 3 ( 1 cement : 3 fine sand) Cement must be PPC with minimum 25% flyash content including cost of carriage compltete job.
74.1
-
337.88
Pebble dash plaster up to 10m height above ground floor with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mix with 10% finally grounded hydrated lime by volume of cement. including cost of carriage compltete job.
474.69
-
594.91
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
474.69
-
175.58
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications Two or more coats applied @ 1.25 liter/10sqm over and
including one coat of special primer applied @ 0.75liter /10sqm
955.9
-
145.6
Polishing on wood work with ready mixed wax polish of approved brand and manufacture:
122.71
-
142.02
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
955.9
-
120.72
Dry stone pitching (any thickness) including cost of stones On Horizontal
18.53
-
608.9
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)
0.71
-
8116.56
Providing and laying water proofing treatment in sunken portion of
WCs, bathroom etc., by applying cement slurry mixed with water
proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will beallowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
60.31
-
382.24
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
146.9
-
439.49
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as
specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
300
-
323.34
Providing and fixing double glazed units(DGU) comprising 6 mm thick glass on either side with 12 mm thick inert gas gapin The DGUs shall be processed from reputed glass processors.
88.03
-
8474.57
Providing and fixing factory made cup board cabinet made out from 19 mm BWP Plywood conforming to BIS 710 of Geenply/Kitply make, quality and make all sides, shelves, drawer and on back sidewith 12 mm thick water proof ply confirming to BIS 710 and laminated on all exposed sides with 1.00 mm thick laminate of approved brand,shade pattern and design. The inside edges of the plywood shall be laminated with 1..00 mm white/off-white shade laminate.The exposed edges shall be sealed with PVC edge beading of same shade and colour. including all approved quality hardware ie heavy duty sliding channels, SS box hinges, handles of approved material/design/size, magnetic catcher, cupboard lock, screws, adhessive of fevicol make etc all complete of approved design and make as per direction of Engineer- in -charge . The rate includes cost of stainless steel SS 304 grade cutlerey baskets for modular kitchen below the kitchen platform of approved make (The unit of measurement is front elevation area)
22.71
-
8474.57
Sanitery Works, Providing, laying and jointing uPVC Pipes (I.S:4985-2000) 6kgf/cm2 including jointing with solvent cement, testing, excavation, refilling and disposal of surplus earth wherever required complete in all respect. a) 110 mm dia
20
-
635.59
b) 160 mm dia
70
-
1144.06
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
2966.1
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) ith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including cost of carriage compltete job.
8
-
12288.13
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
12
-
412.79
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.
12
-
174.11
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.including cost of carriage compltete job.
9
-
213.9
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m all kinds of soil.
90
-
184.19
Providing and fixing PVC piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 with 3 layer pipe made of PP-C + PP-MV + PP-C in Blue Ral 5014 (halogen and calcium free) colour, push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 22 dBA as per DIN 4109 at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe = 1.25gms/cm3, elongation = 0.05mm/m0K and tensile strength 24 N/mm2,with all necessary fittings in blue colour, fitted with factory fitted lip ring incluiding painting with ordinary cement based paint for external installation. a) 75 mm dia
40
-
466.1
b) 110 mm dia
280
-
745.76
Providing and fixing PVC piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 with 3 layer pipe made of PP-C + PP-MV + PP-C in Blue Ral 5014 (halogen and calcium free) colour, push-fit type, food safe, having high impact and stiffness, offering sound levels of not more than 22 dBA as per DIN 4109 at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe = 1.25gms/cm3, elongation = 0.05mm/m0K and tensile strength 24 N/mm2,with all necessary fittings in blue colour, fitted with factory fitted lip ring. (POLOPLAST - PKNG) - For indirect waste/sinks, wash bassin etc.) a) 40mm dia.
20
-
313.55
b) 50 mm dia
20
-
406.77
Providing and fixing sand PVC trap (P trap) of self cleaning design as complete including cost of cutting and making good the cutouts in walls and floors etc. complete.
24
-
347.45
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.72
-
267.88
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. (For rain water pipe)
3
-
303.38
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. a) PN-20 to 25 pipe , 25mm OD as directed by the site engineer. inernal
480
-
443.22
b) PN-20 to 25 pipe , 32mm OD as directed by the site engineer.
140
-
425.08
c) PN-20 to 25 pipe , 40mm OD as directed by the site engineer.
50
-
459.58
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-20 to 25 pipe , 25mm OD as directed by the site engineer. External. PN-20 to 25 pipe , 50mm OD as directed by the site engineer
330
-
218.81
b) PN-20 to 25 pipe , 32mm OD as directed by the site engineer.
15
-
352.66
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.PN - 16 Pipe, 25 mm OD (SDR-7.4)
35
-
227.11
providing and fixing PPR Unions 25mm dia
20
-
307.33
32mm dia
15
-
352.66
40mm dia
10
-
432.03
Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball.25mm nominal bore
6
-
4237.28
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
-
8.22
Providing, fixing, testing and commissioning of insulation on HDPE water tank with layer of class O closed cell Elastomeric Nitrile insulation sheets 15mm thick followed by insulation of 50 mm thick fiberglass insulation (density 48 Kg/cum) all around the tank. the fiber glass insulation shall be protected by 24 gauge aluminium sheet cladding giving proper overlaps & sealing the joints with suitable adhesive compound.
33
-
635.59
Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball.25mm nominal bore
48
-
1689.83
32mm nominal bore
18
-
2960.16
40mm nominal bore
12
-
4050.84
Providing, fixing, testing and commissioning of Air Release Valves screwed ends with ball valve of approved brand of manufacture, with accessories etc., complete.
18
-
957.62
Providing, fixing, testing & commissioning of class-O nitral sheet insulation 13mm /19mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer in charge. a) 25mm dia 13 mm thick
310
-
144.91
a) 25mm dia 19 mm thick
20
-
194.91
b) 32mm dia 13mm thick
15
-
160.16
Providing and fixing insulation to Pipes with 50mm thick resin bonded preformed mineral wool pipe sections of density not less than 144 kg/cum. as per IS:9842 and applying 26g Aluminium sheet as cladding, properly rolled and grooved with joints sealed with a strap of roofing felt (type-III Grade-I conforming to IS:1322) complete with self tapping screws centre to centre distance of 150mm to close cladding joints. The pipes shall be painted with zinc chromate primer before applying insulation a) .25mm nominal bore
480
-
381.35
b) 32mm nominal bore
140
-
508.47
c) 40mm nominal bore
50
-
635.59
Providing, fixing, testing & commissioning of Solar Water Heating system complete with solar panels, insulated SS 304 storage vessel with cemamic lining inside & interconnecting pipes and valves complete in all respect as per manufacturer specifications. Tank shall be supplied without electrical boosters. (Solar heaters shall be equivalent to sholarhart model LCSC Thermosiphon solar heating system and suitable for frost & harsh condition.)
6
-
55084.74
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
6
-
11047.92
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
6
-
3849.49
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(For wash basin)
6
-
751.05
Providing and fixing stainless steel A ISI : 304 (18/8) kitchen sink as per IS : 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls where required.Kitchen sink with drain board 510 x 1040mm bowl depth 250mm
6
-
5090.21
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe Flexible pipe
6
-
88.43
Providing and fixing CP Brass long body bib cock of approved quality confirming to IS standards and weighing not less than 690 gms. 15mm nominal bore
18
-
600.33
Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality confirming to IS:893115mm nominal bore
60
-
424.02
Providing and fixing toilet paper holder.CP Brass
6
-
576.52
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
-
1195.88
Providing and fixing CP Brass shower rose with 15 or 20 mm inlet. 100mm dia
6
-
140.97
Providing and fixing CP Brass stop cock (concealed of standard design and of approved make confirming to IS : 8931 (with shower) 15 mm nominal bore
12
-
504.02
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal bore
6
-
5185.72
Providing, fixing, testing & commissioning of CP brass Sink Mixer, mixing fittings equivalent to (JAQUAR Cat. No. CON-309KNBM.
6
-
4147.45
Providing, fixing, testing & commissioning of C.P. brass twin robe hooks equivalent to JAQUAR Cat. No. 1161.
6
-
700.84
Providing, fixing, testing & commissioning of S.S. hinged grating, 1.5mm thick with frame equivalent to JAYNA NEW HEAVY GRATINGS Cat. No. NHG 140 including setting in floor with cement mortar 1:3.
24
-
950.84
Providing, fixing, testing & commissioning of automatic high pressure electric water heaters equivalent to VENUS with glass lining thermostats with each element and high temperature cut off, necessary insulation, safety valve, etc. all complete.15 liters
6
-
11565.25
25 liters
12
-
13494.06
Providing, fixing, testing & commissioning of Health Faucet equivalent to JAQUAR Cat. No. ALD-573 make with flexible pipe and wall hook with each European W.C. Pan.
6
-
2005.76
Providing, fixing, testing & commissioning of C.P. brass soap dish equivalent to (Jaquar Cat. No. CAN-1131N) including cutting and making good the walls wherever required complete to the satisfaction of Engineer in charge.
6
-
823.72
Providing, fixing, testing & commissioning of C.P. brass Towel Rail 24" equivalent to JAQUAR Cat. No. ACN-1111SM.
6
-
1578.81
Providing, fixing, testing & commissioning of 15mm C.P. brass Connection Pipe Jaquar Cat No. ALD-805B (450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for WC, Geysers & Basin Mixers)) or equivalent make union nuts complete with C.P. brass flange including cutting and making good the walls wherever required. (For Angle Valve)
60
-
372.02
Electrical Works, Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group- B
17
-
646.61
Group- C
60
-
762.71
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
12
-
897.76
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface /recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1012
-
169.49
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
330
-
138.98
c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
360
-
169.49
d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
310
-
211.01
f) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
30
-
277.96
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 pair
480
-
16.94
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
340
-
27.96
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. b) 25 mm
1200
-
76.27
c) 32 mm
153
-
77.96
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required f) Telephone socket outlet
12
-
100.84
g) TV antenna socket outlet
12
-
100.84
h) Bell push
6
-
106.77
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
40
-
27.11
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
60
-
205.93
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
98
-
339.83
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
24
-
419.49
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
170
-
83.05
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
6
-
77.96
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep
12
-
307.62
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
12
-
142.37
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. A) 1 run of cabble
475
-
41.52
Wiring for group controlled (looped) light point/fan
point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
45
-
430.5
Group C
115
-
470.33
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
18
-
541.52
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
1
-
1491.52
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) b) 8 way (4 + 24), Double door
6
-
3899.15
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. A) Single pole
128
-
168.64
b) Double pole
1
-
386.37
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
30
-
6.77
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
6
-
711.01
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as
required. 25 A
1
-
1633.05
40 A
18
-
1775.42
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
12
-
1044.46
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia
including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
4498.3
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
10
-
592.76
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
-
174.57
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
140
-
39.59
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
70
-
31.35
Supply of 9-10W LED downlight recess mounting luminaire, Aluminium powder coated white after phosphochromate treatment with system lumen efficacy of 100lm/W to enhance the lumen output with Output Short-circuit protection, Surge protection. Lumen Output of 1000 lumens.CRI 80, Color temperature 5700K, THD 10% and PF 0.95,IP20,Life class of 50,000 hrs @ L70, Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref- INTEGRAHEDLR10WLED857S or similar from approved makes
78
-
805.08
Supply of 18-20W LED downlight recess mounting luminaire , Aluminium powder coated white after phosphochromate treatment with system lumen efficacy of 100lm/W with Output Short-circuit protection, Surge protection . Lumen Output of minimum 1800 lumens.CRI 80, Color temperature 5700K, THD 10% and PF 0.95,IP20,Life class of 50,000 hrs @ L70, Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref- INTEGRAHEDLR18WLED857S or similar from approved makes
65
-
1250
Supply of 18W linear 4ft LED for wall and ceiling mounting integrated batten made of ultra slim co-extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.White finish ABS end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. High efficiency long life LED with lumen efficacy of 130 lm/W with viewing angle of 120º.Powered by an integral isolated low THD electronic LED driver. Lumen Output of 1860 lumens with System efficacy of 105lm/W .CRI 80, Color temperature 3000K, THD 20% and PF0.95,IP20 . Life class of 35,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref. LUMILINEBS18WLED80S57CWH OR similar from approved makes
18
-
402.54
Supply of Decorative bracket light with 9-10 W retrofit bulb. Havells Stylo
42
-
677.96
Supply of Exhaust fan Ventil Air 200 MM or equivalent
12
-
128.81
Supply of 9-10 W Bulk Head light fixture Pressure Die Cast with IP66 protection & IK09 impact Resistance Havells HEXAFT10WLED857SSYMBOPC
8
-
10487.28
Electrical Panel Design, manufacture, S.I.T.C of following Panels made of 16 S.W.G.C.R.C.A. sheet, steel dust and vermin proof compartmentalized construction with bus bar chambers, cable alley, cable glands plate etc. as required duly painted from inside as well as out side, as below:- Note:- Derating shall be considered as per environmental conditions of Nubra Valley at Ladakh INCOMER 1 Set of 200 Amps 415 Volts TPN MCCB. of 25KA with built in protections. BUS BARS 250 Amps. 3 phase 4 wire 415 volts 50HZ Al. Bus bars with colour coded PVC heat shrinkable sleeves. METERING. 1 Set of 0-500-V (96 sq.mm) Voltmeter with VSS & protection MCB. 1 Set of 0-200-A / 5-A (96 sq.mm) Ammeter with ASS & CT"s 3 Nos. phase indication lights LED type with protection MCB. OUTGOING. 7 Nos. 63 Amp TPN. MCB of 10 KA for units with sealing arrangement by Electricity department. 2 Nos. 32 Amp DP. MCB of 10 KA for units with sealing arrangement by Electricity department. Space for 1 No. Prepaid Metering System with single Phase, single register, & 6 Nos. Prepaid Metering System with Three Phase, Three register, 10 - 40 A KWH Meter with LCD display, communication port, Wired Communication system, Wall mounted with built in disconnector for Auto Load cut-off with Prepaid EMS to keep track of the transactions with meters, maintain consumer wise ledger, generate recharge coupons & data for each consumer as per requirement, generate bills at month end & SMS alert for low credit KWH meter suitable to record Active energy KWH (cumulative) main supply.(To be made as per spec of local Electricity Board)
1
-
42372.88
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements