Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 23,18,000Document Cost
₹ 11,600Tender Fee
Refer Documents
Summary
Construction Of Additional Classroom, Laboratories, Computer Centre, Library, Common Room, Faculty Room Etc On First Floor
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_13325_3Bid Award Id
ViewTender No
E-tender 20 of PW(RnB) Div Kargil 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
ALL KINDS OF SOIL 80%
79.95
20567
257.25
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
39.98
9518
238.07
STONE SOLLING Dumping of stone including cost of stone (in horizontal on level)
11.54
6974
604.39
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) (crushed)
11.54
63373
5491.66
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed)
34.31
210737
6142.17
Reinforced cement concrete work in Footing , Pedestal ,Columns , beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with M20 (1:1.5:3) (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
903.71
10054026
11125.28
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
167186.93
16462897
98.47
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column
78.41
18253
232.79
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
533.01
313441
588.06
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1731.72
772832
446.28
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
2663.78
1502638
564.1
Providing and laying autoclaved aerated cement blocks masonry with 300 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing
in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.
1516.2
17776125
11724.13
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) First class teak wood
4.91
830537
169152.18
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter)
58.47
302943
5181.17
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood
87.71
367896
4194.46
Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with 0.25 and 0.35 VLT may be introduced.)
-
-
-
Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
327.19
2857667
8733.97
Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent
finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with 0.25 and 0.35 VLT may be introduced.)
-
-
-
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
8.36
91185
10907.33
Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete.
350
78228
223.51
TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge
Qty vide window openings @80%
536.89
667563
1243.39
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)
3234.47
1007763
311.57
Pebble dash plaster upto 11m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
1057.39
772613
730.68
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1057.39
164064
155.16
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Note: It Should have Low or No VOC as per Green Building guidelines)
634.43
113296
178.58
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Note: It Should have Low or No VOC as per Green Building guidelines)
-
-
-
New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
(Note: It Should have Low or No VOC as per Green Building guidelines)
97.7
17488
179
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note: It Should have Low or No VOC as per Green Building guidelines)
313.65
22360
71.29
Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.
313.65
53210
169.65
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. (Note: It Should have Low or No VOC as per Green Building guidelines)
20.16
2945
146.11
Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete.
62
8254
133.13
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge)
124.07
220301
1775.62
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.
602.03
1494653
2482.69
P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete.
763.42
1061978
1391.08
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) (Dual flush 4/2L WC cistern with bottom inlet for compact back to wall Rimless toilet)
-
-
-
Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make
24
106500
4437.5
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:
-
-
-
W.C. pan with lSI marked white solid plastic
seat and lid. JAGUAR/CERA Make
4
53250
13312.5
Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make
18
71887
3993.75
P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm
6
6390
1065
P/F Stainless steel 304 Grade Square Shaped Sink Vessel Sink (21 X 18 X 8) inches (Steel) of approved brand and manufacture Hindware/Jaguare/Imperio/ Kaff and any other approved brand as per Engineer Incharge
2
6212
3106.25
Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge
-
-
-
PVC Pipe. 110mm dia (10 feet unit Length)
40
51475
1286.88
PVC Pipe. 75mm dia (10 feet unit Length)
40
39050
976.25
PVC Bend 110mm dia
30
6656
221.88
PVC Bend 75mm dia
30
6656
221.88
PVC Tee 110mm dia
25
6656
266.25
PVC Tee 75mm dia
25
6656
266.25
PVC Collar 110mm dia
20
3550
177.5
PVC Collar 75mm dia
20
2662
133.13
PVC trap 110mm dia
20
7987
399.38
PVC trap 75mm dia
20
7100
355
PVC Socket 110mm dia
18
3195
177.5
PVC Socket 75mm dia
18
3195
177.5
PVC door junction 110mm dia
18
5591
310.63
PVC door junction 75mm dia
18
5591
310.63
Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
PN-16 pipe , 25mm OD(SDR-7.4)
150
57643
384.29
PN-16 pipe , 32mm OD(SDR-7.4)
120
53132
442.77
P/F CP brass toilet paper holder including cost of wodden,PVC,play etc.
28
29820
1065
Providing and fixing Wall mount Liquid Soap Dispenser of approved brand
28
29820
1065
Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required.
-
-
-
L-Drops for room door
62
44020
710
T- Bolt for doors
62
9904
159.75
T- Bolt for Windows
82
12654
154.32
Handles for door
62
9904
159.75
15 mm C.P. brass tap with elbow operation lever of approved brand and manufacture
28
14403
514.4
15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards
28
14403
514.4
15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
72
41535
576.88
15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
30
17306
576.88
C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.
56
4721
84.31
Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab bars Near EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification.
4
26625
6656.25
Providing and fixing Stainless steel SS-304 Grade Foldable Grab bar For Disable-friendly Bathroom/toilets Make: Jaquar/ Equivalent per standard and specification.
4
44375
11093.75
15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
18
55912
3106.25
High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make,
72
22365
310.63
15 mm C.P. brass ABS Health Faucet Jet Spray with Hose and Holder of approved quality conforming to IS standards ( KOHLER/JAGUAR/CERA)
28
32305
1153.75
Supply, Installation, testing and commissioning of 500 liter ETC (Evacuated Tube Collector) based solar water heaters (Cost includes Cold Water Tank, Hot Water Tank, support structures, heat exchanger, electrical backup and installation and commissioning at site. Additional piping will be charged as per actual.
6
372750
62125
Supply installation testing and commissioning of Gyser 50ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
6
133125
22187.5
Supply installation testing and commissioning of Instant Geyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
1
8431
8431.25
Providing and Fixing Handles with lock system of main doors LAPO Premium Rose Mortise Door Lock Handle Set/ Mortise Lock with Brass Lock Body and 70mm Brass Cylinder Set with 3 Brass Computer Keys / Zinc Alloy Weather Proof (Matt Finish) or Godrej Locking Solutions and Systems Gloria Antique Brass Door Handle with Lock Set 2C for Home and Office Entrance Door (200 mm, Gold) or any other approved brand as per engineer incharge
4
29720
7430.15
Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge
2
83425
41712.5
Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia 50mm , two number intermediate Horizontal tubes Dia 25mm and Rectangular Two Pair Balusters Dia 38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post )
76.2
304323
3993.75
Design Supply and installation/Fixing stainless steel SS-304 Grade wall mounted handrail 40-45mm in dia including wall brackets at a spacing of 1.2m-1.5 with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, along staircase wall , corridors with suitable arrangement as per drawings and approval of Engineer-in-charge
200
124250
621.25
THERMAL INSULATION
-
-
-
Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as per engineer in charge which may be of different level celling )
102.82
5484546
53341.24
Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood
4347.45
7330887
1686.25
Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job
4347.45
3472525
798.75
Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-incharge.With resin bonded rock wool with density 48 kg/cum
2503.71
611280
244.15
Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge..
3047.88
4025578
1320.78
Providing and fixing Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 12 mm thick Second class teak wood
2304.68
6136210
2662.5
Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)
300
492564
1641.88
Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge
180
103838
576.88
Suppy and installation of 6 - 8 Inch Dia alumunium suction Duct Pipe (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM ) For HVAC Ducting for kitchen baths including stainless steel Clamps and all necessary fixtures all complete
92.9
214366
2307.5
Supply and installation of Reflective Bubble Aluminum Foil Insulation / Aluminium Silver Bubble Sheet 210 GSM (7 mm) Thick Light Weight Reflective Insulation , Max Withstanding Temperature -40 degree To +110 Degree Waterproof insulation all complete
186.1
30555
164.19
Supply and installation of electrical Underfloor heating mats for floor heating systems non-corrosive, flexible heating elements including cables, pre formed cable mats including smart thermostat and digital electrical control panel all complete (STIEBEL ELTRON / DANFOSS Or any other approved brand
186.1
1024015
5502.5
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of
the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1272.97
2090063
1641.88
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates/ wooden plank or like components including cost of screws etc. complete. First class Budloo/Fir wood.
85.37
10507620
123083.29
Providing and Fixing of Plained Eves Boarding of 25-32mm Thick Wooden Plank of first Class kail wood
451
260172
576.88
Providing and Fixing of Plained Weather Boarding of 25-32mm Thick Wooden Plank first Class kail wood
69.28
86080
1242.5
Supply and installation of ABC Fire Extinguisher, 6 Kg 4Sets (Note : It should be Halon free)
4
24713
6178.37
Providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete
450
1797187
3993.75
Septic Tank
-
-
-
Excavation work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.(SIZE 19' X 10' )
-
-
-
ORDINARY ROCK=80%
68.83
33017
479.69
ALL KIND OF SOIL=20%
15.96
4235
265.36
Disposal of Mulba/Excavated Earth Beyond 50m (Lead upto 6Km) Outside Town Area (CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking)
63.61
21170
332.81
Stone solling Dumping of stone including cost of stone (in Horizontal on level)
1.65
1244
754.38
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) (crushed) MUD MATE
1.92
11792
6142.17
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 course sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 ( 1 cement : 6 course sand) and curing complete (Quarry Stone)
3.75
20665
5510.8
Dry random rubble masonary with hard stone in foundation & plinth using quarry stone with bond stone
8.7
26997
3103.14
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral
stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
6.79
75540
11125.28
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
950.78
93623
98.47
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Suspended floors, roofs, landings, balconies and access platforms.
SEPTIC TANK/SOKAGE PIT
39.04
21784
558
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal
size)
8.44
92882
11005
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)
36.79
12113
329.26
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
7.43
4662
627.46
Supplying and fixing C.I. cover without frame for manholes: 560 mm diameter C.I. cover ( heavy duty) the weight of the cover to be not less than 108 kg
2
12070
6035
Internal Electrification
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
300
390588
1301.96
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2200
536932
244.06
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
4000
1185720
296.43
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75 mmX75 mm)
20
5289
264.48
3 Module (100mmX75mm)
75
21765
290.21
6 Module (200mmX75mm)
160
57084
356.78
8 Module (125 mmX125 mm)
45
18131
402.93
12 Module (200 mmX150 mm)
40
19418
485.46
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
50
4570
91.41
3 pin 5/6 A socket outlet
50
5414
108.28
15/16 A switch
300
41535
138.45
6 pin 15/16 A socket outlet
300
52452
174.84
Telephone socket
10
1313
131.35
TV antenna socket outlet
5
656
131.35
Bell push
5
621
124.25
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
1775
35.5
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
35
2702
77.21
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25mm
2500
321725
128.69
Cast Iron C.I. Junction Box, Size: 25 mm, 4 Way
544
16896
31.06
FAN box
60
4260
71
Subhead-2
-
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
6 way (4 + 18), Double door
2
8828
4414.43
8 way (4 + 24), Double door
4
21182
5295.71
12 way (4 + 36), Double door
4
45557
11389.29
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
276
62707
227.2
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
30
346
11.54
Supplying and fixing following rating, four pole, 415 V, MINIATURE CIRCUIT BREAKER(MCB) in the existing DB complete with connections, testing and commissioning etc. as required.
-
-
-
63 Amps
10
10650
1065
Supplying and fixing following rating, four pole, 415 V, Residual current circuit breaker (RCCB) having a sensivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63 Amps
10
25489
2548.9
Providing and fixing danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
477
238.74
Subhead-3
-
-
-
Earthing
-
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
2
13262
6631.4
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
2
24562
12281.23
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
60
82590
1376.51
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
60
37594
626.58
Subhead-4
-
-
-
Supply & Laying of Cable & End Termination
-
-
-
Supply and laying of following size of 1.1kv grade FR multicore aluminium conductor XLPE insulated and PVC sheathed armoured Power cable as per IS : 7098:1988 (Part - I) with upto date amendments.
-
-
-
3.5 Core 300 Sqmm
100
153360
1533.6
3.5 Core 150 Sqmm
80
81650
1020.63
3.5 Core 120 Sqmm
30
21566
718.88
Supplying, laying, testing, rectification and commissioning of wiring with all the required material for following sub-mains with PVC insulated copper conductor 1100 volts grade of suitable size wires (FRLS) in concealed/surface mounted 25/40/50mm dia Medium duty(FRLS) PVC Conduit either in slabs, partitions or overhead trusses terminating the wires in respective panels, DBs, switch boxes with suitable size earth wires and associated hardwares etc. (Cost of PVC conduit & Flexible Conduit shall be included in this item ). Sizes are as follows :
-
-
-
4 core 16 Sqmm
40
33725
843.13
4 core 10 Sqmm
90
54954
610.6
4 core 6 Sqmm
120
56445
470.38
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required.
-
-
-
3.5 Core 300 Sqmm
10
9114
911.46
3.5 Core 150 Sqmm
16
4472
279.56
3.5 Core 120 Sqmm
6
1432
238.74
Subhead-5
-
-
-
Supply, installation,Testing & commissioning of Internal lighting fixtures
-
-
-
Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD 10 % ,p.f.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.
-
-
-
12W CEILING MOUNTED LED LIGHT
75
53250
710
30W CEILING MOUNTED LED LIGHT (2x2 panel light)
350
683375
1952.5
5 WATTS FOOT LIGHTS
10
3106
310.63
10W LED MIRROR LIGHTS
14
6212
443.75
10W CEILING MOUNTED LED LIGHT
20
10650
532.5
15W CEILING MOUNTED LED LIGHT
25
22187
887.5
Subhead-6
-
-
-
FAN
-
-
-
Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc.
-
-
-
1200 mm Sweep BEE 3 Star rated
60
117150
1952.5
Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required.
-
-
-
300 mm sweep
29
47614
1641.88
Subhead-7
-
-
-
TV , TELEPHONE WIRING
-
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 PAIR
350
11805
33.73
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
8342
41.71
DATA NETWORK
-
-
-
Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable
-
-
-
27 U Rack Floor Mounted
1
39937
39937.5
Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable
-
-
-
4 U Rack wall Mounted
3
7987
2662.5
Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors as per ANSI/TIA/EIA 568 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568, minimum requirement for 1G BASE-T/ 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, Minimum 750 to 1000 mating cycles in plug contacts for long durability complete in all respect. Cat 6, UTP (Un-sheilded Twisted Pair) Patch Cord.
-
-
-
1 Mtr Grey Color CAT 6
130
12691
97.63
2 Mtr
130
14999
115.38
Supply, Installation, Testing and Comissioning of Rack mounted 19" 1U, 24 Port Unloaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panels (Cat-6A) with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel, . There should be a provision for each port/jack on the panel and reusable removable on field from the panel complete in all respect.
6
13312
2218.75
SITC of Intelligent Ethernet POE Switches providing 24 x 10/100/1000 Fast Ethernet POE ports- 370W or better and 4 dual purpose uplink (provision for Copper / Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with related LAN Base Software.
2
62125
31062.5
SITC of Intelligent Ethernet POE Switches providing 16 x 10/100/1000 Fast Ethernet POE ports- 370W or better and 4 dual purpose uplink (provision for Copper / Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with related LAN Base Software.
1
13756
13756.25
Supply, Installation, Testing and Comissioning of Rack mounted , 16 x 10/100/1000 Ethernet ports Gigabit Switch with 4 mini Gigabit Interface Converter slots(shared with 4 Ethernet ports) for Gigabit Ethernet expansion , Switching capacity 96 Gbps nonblocking.
3
26625
8875
Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect.
5000
199700
39.94
Supply and Installation of Cat 6, Un-sheilded/sheilded Information outlets made of high impact plastic body with ABS, FR Grade with provision for protection against dust in jack/ FP, suitable for Cat-6A application complying to latest ammendments, According. to Cat-6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact punch termination on reliable copper tin plated Insulation displacement contact, It complied with ANSI/TIA/EIA 568 standard. In existing modular/MS Boxes along with necessory connections as required complete in all respect.
-
-
-
I/O Jack Cat-6 White
60
29287
488.13
I/O Jack Cat-6 Green
70
34169
488.13
Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Dual or Quad Aperture , material should be PC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. Dimensions should be 86mm X 86mm as required complete in all respect.
-
-
-
Supply, Installation, Testing and Comissioning of Cat-6 Face Plate Single Module
120
10650
88.75
Supply, Installation, Testing and Comissioning of Cat-6 Face Plate Double
10
1065
106.5
Supply, Installation, Testing and Comissioning of 25 Pair Cat-5/Cat-6 Riser Cable for Communication
300
82539
275.13
Subhead-8
-
-
-
Security (CCTV) System
-
-
-
5 MP Varifocal Bullet Network Camera -1/2.7'' Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.7 to 13.5 mm Varifocal Auto iris lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 60m, Support on-board storage up to 256 GB (SD card not included), Alarm : 2 inputs & 2 outputs, Audio: 1 input & 1 output, IP67, IK10, Edge Analytics- Line crossing detection, intrusion detection, Scene change detection, Motion detection, Face capture, audio exception detection, Video tampering, Region entrance detection, Region exiting detection, False alarm reduction through human and vehicle target classification, UL, FCC, CE certified.
4
17750
4437.5
5 MP IR Fixed Dome Network Camera -1/2.7″ Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), Alarm : 1 inputs & 1 outputs, Audio: 1 input & 1 output, Built-in Microphone, , IP67, IK 10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face capture, Region entrance detection, Region exiting detection, Video tampering, Audio exception detection, Focus on human and vehicle targets classification, UL, FCC, CE certified.
55
312400
5680
IP Fixed Mini Dome Camera: 1/2.8" Progressive Scan CMOS, ICR, 0.005 lux, 0 lux with IR, 1920x1080:25fps, 2.8mm Fixed Lens, F1.6 lens, H.265, H.264, MJPEG, Three individually configurable stream, IK08, IP66, DC12V & PoE, 120dB WDR, 3D DNR, BLC/HLC, Support on-board storage up to 128GB (SD card not included), Alarm -1 input,1 output, IR range: up to 10m, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection,face detection, video tampering, UL, CE, FCC certified.
1
3550
3550
64ch Network Video Recorder- Connect Up to 64 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output upto 1920 × 1080, Support H.265, H.264, MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 10TB, RS-232; RS-485, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.
1
61237
61237.5
6TB Surveillance Hard Disk
8
86620
10827.5
42" 1080P Display, HDMI/VGA input, view angle:178°/178°, 300cd/㎡, plastic casing, VESA, base bracket included, 7*24h
2
71000
35500
Supplying, installing, Testing and commissioning of workstation as follow : NVMMS Client shall be running on workstation/PC with minimum Intel Core i7-7920HQ 3.10GHz Processor 8mb cache memory, 4.10 GHz max turbo, 16GB RAM, 1TB HDD SATA Drive extendable upto 16 TB, Windows 10 (64 Bit) OS, DVD R/W, Integrated Intel HD graphics 530 and NVIDIA Quadro NVS 315 1 GB PCIE x 16 LP supporting 4 Monitors, LAN/Ethernet :2 x 10 Gbit CNA via Midplane to Ethernet Connection, with 26" TFT Monitor.
1
80052
80052.5
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25mm
1500
193035
128.69
Subhead-9
-
-
-
LT Panel
-
-
-
Supply, installation, testing & commissioning of cubicle type compartmentalized floor mounted free standing with separation system as per IS:8623 part 1 for 415V, 50HZ, 3phase 4 wire AC supply, moisture, dust and vermin proof IP-55, L.T.Panel boards, made out from 2mm thick CRCA sheet steel duly epoxy powder coated (by seven tank process ) in approved colour, complete with interconnections / control/ power wiring with FRLSH copper conductor wires & 6A SP MCBs for control circuits ,communicable meters shall be with software, high conductivity Aluminium bus bars, earth bus,Bus bar supports, removable 3mm thick gland plates on top & bottom, M.V. danger notice plate , louvers and following incomer and outgoing feeders (outgoings will be with ON indication with 6A control MCB) complete as per specifications and drawings and approved by engineering incharge.
1
710000
710000
INCOMER : 1
-
-
-
630 Amp , 35kA 4 Pole MCCB EDO with built in microprocessor release -1 Set
-
-
-
2N0s.630A CTs,1 no. CT operated digital Multifunction meter with minimum main parameters like (V,A,Hz, Pf, KW, KWH,MD) & communication port & software, selector switch, control MCBs. 3- Nos. Phase & ON-OFF indicating LED lights with control MCBs- 1 Set
-
-
-
INCOMER : 2&3
-
-
-
250 Amp 4 Pole Moulded Case circuit breaker with built in micrpoprocessor release - 2 Set
-
-
-
1N0s.250A CTs,1 no. CT operated digital Multifunction meter with minimum main parameters like (V,A,Hz, Pf, KW, KWH,MD) & communication port & software, selector switch, control MCBs. 3- Nos. Phase & ON-OFF indicating LED lights with control MCBs- 2 Set
-
-
-
BUS BAR -
-
-
-
TPN aluminium bus bars of minimum 630Amps capacity with heat shrinkable coloured sleeves and i/c, SMC bus bars supports at required intervals complete for cross section, side supports & their spacing etc.
-
-
-
OUTGOINGS
-
-
-
250 Amp. TPN MCCB (1no.)
-
-
-
160 Amp. TPN MCCB (2no.)
-
-
-
125 Amp. TPN MCB (2no.)
-
-
-
63 Amp. TPN MCB (15no.)
-
-
-
630Amp CONTACTOR 4P -1SET
-
-
-
250Amp CONTACTOR 4P -2SET
-
-
-
250Amp CONTACTOR 4P -1SET
-
-
-
PLC Logic control panel for load management and interlocking
-
-
-
Providing & Fixing APFC PANEL of IP54 microprocessor based 6 to 8 stage, 3 CT’s for all 3 phase sensing compensation power factor correction relay Size 139mm x 139 mm, Operating Voltage 415/440 V , IEC / EN 61000-6-(2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, communication interface with RS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , step switching time 2 sec to 1800 sec. Providing & Fixing of AC operated heavy duty 230 /440 Volt power contactor as per requirement for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in charge.
-
-
-
125 KVAR
-
-
-
Subhead-10
-
-
-
LIGHTENING AREESTER
-
-
-
Design,Supply,Erection, Testing and commissioning of advanced Piezoelectric Ceramic Based Lightning Protection system suitable for protection of buildings against direct lightening strike complete with Early streamer Emission( with Piezoelectric exciter device for corona effect), chromium plated copper lightning conductor air terminal, event Counter with sensitivity 1 KA to 100 kA for 8/20 micro second impulse without additional power supply requirements and complete as required
1
103393
103393.75
Design,Supply,Erection, Testing and commissioning of total maintenance free earthing terminal including Safe Earthing Electrode of Length 3 meters- 80 mm diameter including excavation and back fill compound complete as required.
1
6035
6035
Supply, Installtion,Testing and commissioning of Flexible Insulated 50 square cm Copper flat Down conductor including cost of saddles etc complete as required.
30
16773
559.13
Subhead-11
-
-
-
FLOOR RACEWAY , JUNCTION BOX & CABLE TRAY
-
-
-
Supplying & Installing floor - raceways consisting of following sizes of 2mm thick rectangular aluminium anodized box, box sections including chasing and refilling as per the route shown in the drawing ( including clamping at every open pipe ends by suitable plastic end covers against entry of dust or any material.)
-
-
-
100 x 38 mm Aluminium raceways, 2 mm thick.
90
39937
443.75
50 x 38 mm Aluminium raceways, 2 mm thick.
70
18637
266.25
Supplying & Installing Galvanised floor junction boxes, fabricated out of 2.5 mm thick G.I. sheet with proper cutouts on the sides for pipe entry complete with SS brushed finish 14 SWG ( 2mm Thick) cover with rubber gasket, properly fixed with countersunk screws & top cover should have suitable knockouts for flexible conduit outlets as per requirements
-
-
-
300 mm x 300 mm x 65 mm, 2 mm thick. Floor junction Box
6
2662
443.75
150 mm x 150 mm x 65 mm, 2 mm thick. Floor junction Box
20
6212
310.63
Supplying and fixing of following powder coated Ladder type cable trays fabricated from 2 mm thick sheet steel having 25 mm x 75 mm H x 25 mm channel type side runners and 15 mm x 35 mm H x 15 mm channel rungs spaced at interval of 250 mm with 2 nos channels provided at every alternate rung including the cost of fixing the tray on vertical wall by means of dash fasteners spaced maximum 750 mm apart and including the cost of powder coating of approved shade of minimum 50 microns film thickness on MS surface cleaned and prepared with 7 tank process and including the cost of providing loop earthing with 2 nos. 25 mm x 6 mm GI earth strips complete as per specifications, as required, and as below.
-
-
-
600 mm wide
30
34213
1140.44
Supplying and fixing of following powder coated Perforated Type Cable Tray system including fittings and accessories on existing structural supports, fabricated from minimum 2 mm thick CRCA MS sheets including the cost of powder coating of approved shade of minimum 50 microns film thickness on MS surface cleaned and prepared with 7 tank process and including the cost of providing loop earthing with 2 nos. 25 mm x 3 mm GI earth strips complete as per specifications and including the cost of approved arrangement of cable tray hangers fabricated from galvanized MS angles/flats/rods including jointing the steel sections of the support arrangement with nuts & bolts / welding and including securing the support to the structural ceiling by dash fasteners etc. complete with spacing of 600mm for 900mm/1200mm and 750mm for lower sizes , as required, and as below.
-
-
-
300 mm x 50 mm x 50 mm trays
30
22631
754.38
150 mm x 50 mm x 50 mm trays
50
34612
692.25
Subhead-13
-
-
-
Supply, Installation, Testing and Comissioning of 5 KVA UPS INCLUDING BATTERY BACKUP OF 25 MINUTES WITH ALL ACCESSORIES INCLUDING INTERCONNECTION CABLES AND STAND.
1
133125
133125
Supply, Installation, Testing and Comissioning of 20 KVA UPS INCLUDING BATTERY BACKUP OF 25 MINUTES WITH ALL ACCESSORIES INCLUDING INTERCONNECTION CABLES AND STAND.
1
355000
355000
Subhead-14
-
-
-
SOLAR PV
-
-
-
Supply Installation testing and commissioning of the on grid roof top solar system, comprising of the Mono PERC Half cut Cell Monocrystalline solar module min efficiency of 21%, module mounting structure having corrosion resistance galvanisation or power coated paint and storm withstand capacity in the storm as per the Zone, Including accessories like the fasteners, interconnecting cables, junction boxes, String Inverters/power conditioner, DC Cables, module to module earthing arrangements, Earthing strips, required earthing, AC cables for termination of the solar to in-house electrical panels, Electrical panels and switchgear for synch power with the building Electrical system, Communication cable, remote monitoring arrangement. lightening arrester, metering panel, conduits, suitable cable tray, Net metering, complete as per the requirement, CPWD specifications for solar pV and electrical work. Simulation energy generation study as per the site geological location( Latitude_ longitude__) complete as approved by NIT authority and as per CPWD specifications
-
-
-
65 KWp ( Main building)
1
4992187
4992187.5
Supply, Installation, Testing and Commissioning of Ceiling / Floor mounted Tube Direct driven Axial Flow Fans with adjustable pitch blade, MS Powder Coated / GI long casing, cast aluminum alloy impeller complete with TEFC Sq. Cage Induction Motor ( IE-3 High Efficiency /Eff-3) suitable for 415 Volts ± 10%, 50 HZ ± 3%, three phase A.C. supply with support, mountings, cushy foot type vibration isolators, fire retardant flexible canvass connector 150 mm deep ( Inlet & Outlet as required ), GI bird screen ( on Inlet & Outlet as required ) and Starter panel of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Axial Fan shall be as per design guidelines for Air Sound performance in accordance to AMCA 210 for air performance and AMCA 300 for sound performance. Complete Fan shall be tested and approved by UL in accordance with “Power Ventilators for Smoke Control Systems” for 250 °C for 2 hours.Fans shall be selected and installed to have noise level not more than 70 dBa for fan diameter more than 1000mm and not more than 60 dBa for fan diameter less 1000mm
Fans to have NON RETURN DAMPER AND GI safety wire mesh with screen on exposed face, including all fabricated Galvanized duct, Channels/angles supports, fire rated canvas connection etc. to install the fans on floor or ceiling. Cost to be included in item rate.
-
-
-
Staircase Pressurization
Air Qty. = 5000 CFM
External Static Pressure = 25 mm Wg
Fan Speed / KW = Not exceeding 1450 rpm/ 1.75 KW
Outlet Velocity = Not exceeding 14 m/s
Tube Axial Fans as described above.
1
100000
100000
Lift well Pressurization
Air Qty. = 4000 CFM
External Static Pressure = 25 mm Wg
Fan Speed / KW = Not exceeding 1450 rpm/ 1.5 KW
Outlet Velocity = Not exceeding 14 m/s
Tube Axial Fans as described above.
1
95000
95000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements