Travancore Devaswom Board Tender

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20mm with specials conforming to IS 9537 Part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00Sq.mm FRLS PVC insulated stranded single core copper conductor cable 650V grade including providing switch board main and continuous earthing with No.14 SWG bare copper, required quantity of copper earth socket, brass bolt and nut crimping / soldering etc. complete with suitable size modular type metal switch boxes, modular type front plates (white), etc. up to and including 6A modular type SP switches and making good the surface of wall colour washing, etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts, etc. as required (ROHS complaint modular accessories).

Single control ceiling fan point with 6A, 3 plate ceiling rose and with socket size stepped electronic regulator – short point.

Single control light point with 6A 3 plate ceiling rose – medium point

Single control light point with 6A 3 plate ceiling rose – long point.

Pendent holder

Supply and fixing 50W LED large size bulb to the existing points.

Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps, etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire confirming to relevant ISS and giving connections as required.

1200mm 1x20W LED lamp with box type fixture.

Supplying and fixing following size/ modules GI box along with modular base cover plate for modular switches in recess, etc. as required.

1 or 2 Module (75mmx75mm)

3 Module (100mmx75mm)

6 Module (200mmx75mm)

12 Module (200mmx150mm)

Supplying and fixing following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate, etc. as required.

5/6 Amp switch

15/16 Amp switch

3 Pin 5/6 Amp socket outlet

6 Pin 15/16 Amp socket outlet

Supplying and fixing 3 pin 5 Amps ceiling rose on the existing junction box / wooden block including connection, etc. as required.

Supply and fixing brass batten / angle holder including connection, etc. as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.

1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C

2.5 micro farad capacitor

Supply, conveyance, installation, testing and commissioning of 40W LED flood light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make erec / lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply, Driver compartment, should be separately accessible for maintenance (LM 79 & 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer)

Supply, conveyance, installation, testing and commissioning of 70W LED flood light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make erec / lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply, Driver compartment, should be separately accessible for maintenance (LM 79 & 80 certificates from NABL accredited third party lab to be produced mentioning chip manufacturer)

Supply, conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105 lumen/W 4000-6000K with IP 66 protection LED chip make Crec / Lumilled / Nichea with power factor greater than 0.95 at full load, internal surge protection upto 8kV and aluminium pressure die cast powder coated housing acrylic cover complete with THD less than 10% power factor greater than 0.98, RoHs compliant, duly wired up for use on 230V A.C. supply. Driver compartment should be separately accessible for maintenance (LM 79 & 80 certificate from NABL accredited third party lab to be produced mentioning chip manufacturer)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing, etc. as required. (But without MCB / RCCB / Isolator)

8 Way Double Door

Supply and fixing 5A rating 240/415V, C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning, etc. as required.

Single pole

Supplying and fixing following rating, double pole 240V isolator in the existing MCB DB complete with connections, testing and commissioning, etc. as required

40 Amps

Supplying and fixing following rating, double pole (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current up to 30mA in the existing MCB DB complete with connections, testing and commissioning, etc. as required.

40A