Public Works Department Tender

OD262714/2024-2025:Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

OD262541/2024-2025:Supply Conveyance, installation, testing and commissioning of 45W LED street light output greater than 110lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 10KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) and including 5 years warranty.

OD233354/2023-2024:Supply installation testing and commissioning of Decorative Pole 2.5 meter height including vertical height of decorative decorative antique copper type double arm bracket (500MM DOH at the height of 2010mm) above the ground level made out of GI, tubular pole ‘T’ washed and primered (ASTM A123) having two section section, bottom section with of dia of 114mm following with base casting of 145mm dia and upper section of minimum with dia of 76mm. Thickness 3mm. The pole shaft shall be as per IS 1161.The pole shall have cast iron embellishments in golden colour. The pole shall have base plate of dimension minimum 200x200x12mm. The pole shall be with inbuilt junction looping box at bottom section with connector for loop in & loop out and with MS base plate and provision for MCB.The pole shall be suitable for wind loading's as per IS 875 part 3 1987. Design comply EN40 standard and basic wind speed 169kmph.Pole should hot dip galvanized to 65 microns. The Pole should be given with two coats of epoxy primer and above that it should be given with polyurethane UV resistant coating to micron of 100. Supply of Double arm decorative bracket 500mm overhang tightened to the pole top with stainless steel luminaries. The complete system should be hot dipped Galvanized. The casted part shall be in golden colour. CAT REF: KESSLEC GI 2.5M RILA POLE WITH GI DOUBLE ARM BRACKET 500MM OVERHANG AND BASE PLATE PU PAINTED or equivalent

OD233355/2023-2024:Supply, conveyance, installation, testing and commissioning of 15W LED post top lantern, body made of PDC aluminium spigot for mounting and heat sink for effective thermal management , IP66, IK10, control gear compartment accessed from top for ease of serviceability. Overall system High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W and L79 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having Circuit protection, Over Voltage protection, Surge Voltage protection upto 10 kV with SPD & other safety test as per IS 15885 Part-2/Sec 13. etc as required (Havells 15W 5700K Ruby LED Post Top Landscape Light, RUBYMINIPT15WLED757PSYMTOPC) or equivalent

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.12.5.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

90.12.5.39:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 6 sq mm

90.12.7.39:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp

9.1.3:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

90.16.1.9:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.64 mm GI conductor (12 SWG)

9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.8:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

OD233368/2023-2024:Supply & installation of dust and vermin proof, Meter box with size 400X300X190 MM IP Rating: IP55 and to fix DB, contactor and timer etc. as required including fixing it on wall, making good the damages colour washing etc. as required.

OD233389/2023-2024:SITC of 25A Power Contactor for power control application and giving connections etc as required.

OD233452/2023-2024:Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade PVC insulated stranded 1.5 Sq.mm single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.

OD233455/2023-2024:Providing and fixing digital timer switch suitable for adjusting time for the ON/OFF control of AC power contractor.L&T make: model no:67DDT0 or equivalent.

OD233458/2023-2024:Supply and fixing Add -on Auxiliary contact Block 2 N0 and giving connection are required.

OD233734/2023-2024:Dismantling existing existing old street light pole by manually / mechanical including removal of concreate foundation, stacking of serviceable and conveyance to section store as per direction of Engineer-in-Charge:

OD234743/2023-2024:Painting the foundation of the pole(30cm x 20 cm/ face) with white and black enamel paint two coats for protection and identification as required

OD234749/2023-2024:Supply and fixing 4 Way Terminal Connectors, 16A and giving connections etc as required

OD234744/2023-2024:Painting letters or figures of the 2.50 cm, 4 cm or 5 cm height sizes with enamel paint as identification mark to SB, DB, panel board etc as requiredbr