Public Works Department Tender

Estimate

OD141624/2024-2025: Hire and labour charges for 3 days for providing Aluminum German hanger tent (8-15m span) having members for frame of standard pattern connected in Aluminum post in correct position and tying the same for avoiding wind pressure , roofing with Tarpaulin sheet, including conveyance of all material and labor charges and dismantling and removing the same after function is over (plan area excluding projections shall be taken for payment) Framework- hard pressed extruded aluminum alloy T 6061- T 6 (Having base plate for main frame 40x35 mm, Main leg post size 20x12 cm and length of main post 3.60 m. And tress frame size 60x60 mm and length 4.90 m, stay size 60x60 mm length 5.90 m. etc complete.) Cover having density 650 g/sqm Translucent white PVC for side wall , 850 g/sqm block out white PVC tarpaulin for roof 950 g/sqm transparent PVC fabric water proof UV resident fire retardant. etc complete. (Frame hoisting by manual means.)

OD141625/2024-2025:Hire and labour charges for providing & fixing PVC corrugated roofing sheets of good quality up to any pitch for 3 days, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers etc complete. The sheet shall be opaque and translucent, clear or pigmented, textured or smooth as specified including dismantling and stacking charges, including steel work in built up GI/ MS tubular (round, square, rectangular hollow tobe etc ) trusses etc, including cutting hoisting fixing in position and applying primer coat and synthetic enamel painting , including welding and boltee withn special shaped washers etc. complete including dismantling and staking charges up to three days complete . The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified including dismantling and stacking charges, including steel work in built up G I/MS tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat and synthetic enamel paining in regular intervals , including welding and bolted with special shaped washers etc. complete, including dismantling and stacking charges up to 3 days.