Military Engineer Services Tender

Calculate bid estimation of Kerala MES Tender

BOQ Items

ItemQuantityUnitsRateAmount
... more
Total amount of Sch 'A' part-I ( Buildings/Structures)
1Lumpsum-510441736
... more
Total amount of Sch 'A' part-II (Excavation, earthwork & Site Develoment)
1Lumpsum-31417942.4
... more
Total amount of Sch 'A' part-III (Demolition of existing structures)
1Lumpsum-219108.83
... more
Total amount of Sch 'A' part-IV (Internal Water Supply)
1Lumpsum-1936517.1
... more
Total amount of Sch 'A' part-V (Internal Electric Supply)
1Lumpsum-2903277.7
... more
Total amount of Sch 'A' part-VI (External Water Supply)
1Lumpsum-2261766
... more
Total amount of Sch 'A' part-VII ( External Electric Supply)
1Lumpsum-344594.9
... more
Total amount of Sch 'A' part-VIII ( Area Drainage)
1Lumpsum-6219524.8
... more
Total amount of Sch 'A' part-IX (Sewage Disposal)
1Lumpsum-2374770.14
... more
Total amount of Sch 'A' part-X (Road, Path and Culvert)
1Lumpsum-5887114.48
... more
Total amount of Sch 'A' part-XI (Retaining wall/Parapet wall)
1Lumpsum-26494907.8
... more
Total amount of Sch 'A' part- XII (Fire Fighting Works)
1Lumpsum-2226786.8
... more
SCH. 'A' PART -XIII (MISCELLANEOUS) Note :- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.
---
... more
Internal Water Supply:- Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 20 mm bore and fixed ( Code No. OPP-15001 of Jaguar or equivalent of other make specified in the list of manufacturer ) complete all as specified .
174Each--
... more
Bib Cock, chromium plated, cast copper alloy long body screwed for CPVC pipe 15/16 mm dia bore.Make: Jaquar Code No CON- 107 KN or equivalent of other make specified in the list of manufacturer complete all as specified
163Each--
... more
Angular stop cock, chromium plated, cast copper alloy, screwed down, screwed for CPVC pipe 20mm dia bore Make Jaquar code No CON-059KN or equivalent of other make specified in the list of manufacturer complete all as specified
801Each --
... more
Concealed stop cock, long body chromium plated, cast copper alloy, screwed down, screwed for iron pipe 15/16mm dia bore for shower rose Make Jaquar code No CON-069KN or equivalent of other make specified in the list of manufacturer complete all as specified
288Each --
... more
Chromium plated brass over head water shower of 120mm diameter. (Jaquar Catalog No. OHS-1799 & SHA-483 or equivalent specified in the list of manufacturer complete all as specified
144Each--
... more
Health Faucet Make jaquar Cat Part No. ALD-579 or equivalent of other make specified in the list of manufacturer with 1.0 Mtr flexible tube 16mm dia (outer), low density polythene, suitable for cold water application complete with union and teflone washers and holder to suit 15mm angle cocks complete all as specified
163Each--
... more
Low density ploythene pipe 16 mm dia (outer), metallic baided, 450 mm long suitable for cold/Hot water application complete with brass union on both sides complete all as specified
615Each--
... more
INTERNAL ELECTRIFICATION :- Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. with and including heavy duty non metalic regid PVC concealed conduit medium duty and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with galvanised modular mild steel/pressed steel sunken boxes (with earth dolly) duly electroplated, covered with modular frame and base plate for fixing of modular switches, sockets and fan regulators etc, including one run of PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- (NOTE: (i) Switches, sockets, regulators to be measured and paid for separately.
---
... more
(a) All as per item No. 21 here-in-before but for One light point controlled by one 5/6 amps one way switch complete all as specified
5752point--
... more
(b) All as per item No. 21 here-in-before but for One ceiling fan/exhaust point controlled by one 5/6 amps one way switch and one fan regulator complete all as specified
907point--
... more
(c) All as per item No. 21 here-in-before but for One Socket outlet, three pin, 5 Amp, independent controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin complete all as specified
2724point--
... more
(d) All as per item No. 21 here-in-before but for One Socket outlet, three pin, 5 Amp, controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 3 pin. on the same board with other switches, sockets, fan regulators etccomplete all as specified
94point--
... more
(e) All as per item No. 21 here-in-before but for one light point conrolled by 2 Nos, 2 way switches 5/6 Amps complete all as specified
191point--
... more
Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. with and including heavy duty non metalic regid PVC concealed conduit medium duty and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with galvanised modular mild steel/pressed steel sunken boxes (with earth dolly) duly electroplated, covered with modular frame and base plate for fixing of modular switches and sockets etc, including on run of PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 15/16 amps socket outlet independent board:- (NOTE: Switch and socket to be measured and paid for separately)
254point--
... more
Supply, fixing, testing and commissioning of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole 20A MCB all as specified
90Each--
... more
Supply, fixing, testing and commisioning of RCBO double pole (DP) 16 A, 100mA,AC,230V,10KA,ISI marked as per IS 12640-2,IP 20 protected terminal front phase indication for earth leakage fault colour coded ON/OFF indication on dolly .Make:legrand Cat No.411332 or equivalent in other makes as specified in the list of manufacturers complete all as specified
196Each--
... more
Supply, fixing, testing and commisioning of RCBO double pole (DP) 25 A, 100mA,AC,230V,10KA,ISI marked as per IS 12640-2,IP 20 protected terminal front phase indication for earth leakage fault colour coded ON/OFF indication on dolly .Make:legrand Cat No.411332 or equivalent in other makes as specified in the list of manufacturers complete all as specified
32Each--
... more
Supply, fixing, testing and commisioning of RCBO double pole (DP) 40 A, 100mA,AC,230V,10KA,ISI marked as per IS 12640-2,IP 20 protected terminal front phase indication for earth leakage fault colour coded ON/OFF indication on dolly .Make:legrand Cat No.411332 or equivalent in other makes as specified in the list of manufacturers complete all as specified
1Each--
... more
Supply, fixing, testing and commisioning of RCBO four pole (4P) 25A, 100mA, AC,415V,10KA, ISI marked as per IS 12640-2, IP 20 protected terminal front phase indication for earth leakage fault colour coded ON/OFF indication on dolly. Make:legrand Cat No.411371 or equivalent in other makes as specified in the list of manufacturers complete all as specified
3Each--
... more
Supply, fixing, testing and commisioning of RCBO four pole (4P) 40A, 100mA, AC,415V,10KA, ISI marked as per IS 12640-2, IP 20 protected terminal front phase indication for earth leakage fault colour coded ON/OFF indication on dolly. Make:legrand Cat No.411373 or equivalent in other makes as specified in the list of manufacturers complete all as specified
54Each--
... more
Supply, fixing, testing and commisioning of MCCB three pole (3P) 25A, AC,415V,16KA, ISI marked Make:legrand or equivalent in other makes as specified in the list of manufacturers complete all as specified
2Each--
... more
Supply, fixing, testing and commisioning of MCCB three pole (3P) 40A, AC,415V,16KA, ISI marked Make:legrand or equivalent in other makes as specified in the list of manufacturers complete all as specified
6Each--
... more
Supply, fixing, testing and commisioning of MCCB three pole (3P) 63A, AC,415V,16KA, ISI marked Make:legrand or equivalent in other makes as specified in the list of manufacturers complete all as specified
30Each--
... more
Earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick burried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or control board and GI pipe medium grade 20mm bore for watering, funnel with wire mesh. PCC chamber pit in PCC 1:3:6 type C-1, 40 mm thick precast RCC M-25 (design mix) cover reinforced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50 m complete all as specified and shown in electric plate No.03 of SSR Part-I(2009), connecting to earthing test point all as specified including testing on completion.
24Each--
... more
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified
1200Running Meter--
... more
Submain wiring with 2 run of 2.5Sqmm two single core (for phase and neutral) using multistranded copper conductor PVC (FRLS) insulated unsheathed with and incl 2.5Sqmm insulated unsheathed PVC insulated multistranded copper conductor as earth continuity conductor connected to common earth dolly drawn in PVC concealed conduit not less than 20mm dia ISI marked with accessories complete all as specified (Note: 03 runs of 2.5Sqmm and one run of PVC concealed conduit shall be measured as one run only)
16121Running Meter--
... more
Submain wiring with 2 run of 4Sqmm two single core (for phase and neutral) using multistranded copper conductor PVC (FRLS) insulated unsheathed with and incl 4Sqmm insulated unsheathed PVC insulated multistranded copper conductor as earth continuity conductor connected to common earth dolly drawn in PVC concealed conduit not less than 20mm dia ISI marked with accessories complete all as specified (Note: 03 runs of 4Sqmm and one run of PVC concealed conduit shall be measured as one run only)
29177Running Meter--
... more
Submain wiring with 2 run of 6Sqmm two single core (for phase and neutral) using multistranded copper conductor PVC (FRLS) insulated unsheathed with and incl 6Sqmm insulated unsheathed PVC insulated multistranded copper conductor as earth continuity conductor connected to common earth dolly drawn in PVC concealed conduit not less than 25mm dia ISI marked with accessories complete all as specified (Note: 03 runs of 6Sqmm and one run of PVC concealed conduit shall be measured as one run only)
11860Running Meter--
... more
Submain wiring with 4 run of 6Sqmm four single core (for phase and neutral) using multistranded copper conductor PVC (FRLS) insulated unsheathed with and incl 6Sqmm insulated unsheathed PVC insulated multistranded copper conductor as earth continuity conductor connected to common earth dolly drawn in PVC concealed conduit not less than 32mm dia ISI marked with accessories complete all as specified and directed. (Note: 05 runs of 6Sqmm and one run of PVC concealed conduit shall be measured as one run only)
1776Running Meter--
... more
Supply, fixing, testing and commissioning of decorative Ultra slim linear 20 W, 4 feet LED lighting fixture with extruded Aluminium heat sink, environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : Philips model No. BN021C LED 20S or equivalent in other makes as specified in the list of manufacturers complete all as specified
1278Each--
... more
Supply, fixing, testing and commissioning of decorative Ultra slim linear 9/10 W, 2 feet LED lighting fixture with extruded Aluminium heat sink, environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : Philips model No. BN021C LED 10S-6500 or equivalent in other makes as specified in the list of manufacturers complete all as specified
529Each--
... more
Supply, fixing, testing and commissioning of 1 x 15W LED fitting, 230v, Indoor recess / surface mounting downlight circular type with reflector, connector block etc., complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Philips model No. SM251C LED 16S-6500 PSU WH or equivalent in other makes as specified in the list of manufacturers complete all as specified d.
1003Each--
... more
Supply, fixing, testing and commissioning of foot lamp - 5 watt LED - 4 module, AC, 230V, ISI marked. including all connections and accessories as required. Make : Havells cat. no. AHLPFCWL04 or equivalent in other makes as specified in the list of manufacturers complete all as specified
451Each--
... more
Supply, fixing, testing and commissioning of square type surface mounted light fitting 12W LED, with extruded Aluminium heat sink, environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : philips model no.: SM 200C LED11S 6500 PSU OD WH or equivalent in other makes as specified in the list of manufacturers complete all as specified
222Each--
... more
Supply, fixing, testing and commissioning of decorative type table lamp light fitting 5W LED, with environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : Luker LED table lamp LTL05 or equivalent in other makes as specified in the list of manufacturers complete all as specified
450Each--
... more
Supply, fixing, testing and commissioning of LED light fitting, 1 x 25 w, Wallmounted type with multi color ABS housing with polycarbonate rings, and glass shade with lamp holder, connector block, etc., complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230v,50Hz. Make : Luker LED wall mounted lamp LWL10E27 or equivalent in other makes as specified in the list of manufacturers complete all as specified
15Each--
... more
Supply, fixing, testing and commissioning of LED light fitting, 1 x 3w, Cub board /wall mounted type 230v, epoxy powder coated CRCA sheet housing with reflector cover channel, with drive unit, connector block, etc., complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductor cable with suitable size. Make : Philips strike shape cabinet lamp or equivalent in other makes as specified in the list of manufacturers complete all as specified
900Each--
... more
Supply, fixing, testing and commissioning of 3 watt LED Bed light fittings inculing all conections and accessaries as required. Make : Luker LED focus light LSP 04 or equivalent in other makes as specified in the list of manufacturers complete all as specified
450Each--
... more
Supply, fixing, testing and commissioning of smart xtra 40 W, 4 feet LED aluminium batten lighting fixture suitable for surace/ wall & conduit mounting with extruded Aluminium heat sink, environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : Philips model No. BN100C LED 40S-6500 PSU L120 GR or equivalent in other makes as specified in the list of manufacturers complete all as specified
72Each--
... more
Supply, fixing, testing and commissioning of 40/41W, LED downlighter fixture suitable for surace/ recess mounting (double height ceiling) with extruded Aluminium heat sink, environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : Wipro model No. LED Gimball LD56-501-060-40-XX** or equivalent in other makes as specified in the list of manufacturers complete all as specified
98Each--
... more
Supply, fixing, testing and commissioning of 30W, LED wall mounted light fixture with extruded Aluminium heat sink, environmental friendly, energy efficient prewired with lamp, AC, 230V, ISI marked. Make : Wipro model No. Skyline LED LR02-331-XXX-57-XX or equivalent in other makes as specified in the list of manufacturers complete all as specified
165Each--
... more
Supply, fixing, testing and commissioning of MCB SP 16 to 32 A, AC, 230V, 10KA complete all as specified
547Each--
... more
Supply, fixing, testing and commissioning of MCB SP 6 to 10 A, AC, 230V, 10KA complete all as specified
2042Each--
... more
Supply, fixing, testing and commissioning of MCB SP 40 A, AC, 230V, 10KA complete all as specified
6Each--
... more
Supply, fixing, testing and commissioning of MCB 63A, TPN, AC, 433V, 10KA complete all as specified
4Each--
... more
Supply, fixing, testing and commissioning of MCB 40A, TPN, AC, 433V, 10KA complete all as specified
63Each--
... more
Supply, fixing, testing and commissioning of MCB 25A, TPN, AC, 433V, 10KA complete all as specified
4Each--
... more
Supply, Installation ,testing and commissioning of surface/recess mounting, vertical type, 415 volts, prewired, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 250 amps tinned copper busbar for each phase, common neutral link, earth bar, din bar for mounting MCB's detachable gland/ knock out plate, and with built in loose wire box and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/ neutral link and ready for installation of following ways (but without MCB's and incomer) as required. - 4Way VTPN DB with metal door. Legrand Catalogue no.: 5077 59 or equivalent in other makes as specified in the list of manufacturers complete all as specified
1Each--
... more
Supply, Installation ,testing and commissioning of surface/recess mounting, vertical type, 415 volts, prewired, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 250 amps tinned copper busbar for each phase, common neutral link, earth bar, din bar for mounting MCB's detachable gland/ knock out plate, and with built in loose wire box and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/ neutral link and ready for installation of following ways (but without MCB's and incomer) as required. - 8Way VTPN DB with metal door. Legrand Catalogue no.: 5077 59 or equivalent in other makes as specified in the list of manufacturers complete all as specified
14Each--
... more
Supply, Installation ,testing and commissioning of surface/recess mounting, vertical type, 415 volts, prewired, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powder painted, inclusive of 250 amps tinned copper busbar for each phase, common neutral link, earth bar, din bar for mounting MCB's detachable gland/ knock out plate, and with built in loose wire box and superior make terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FR PVC insulated copper conductor upto the terminal connector/ neutral link and ready for installation of following ways (but without MCB's and incomer) as required. - 12Way VTPN DB with metal door. Legrand Catalogue no.: 5077 60 or equivalent in other makes as specified in the list of manufacturers complete all as specified
21Each--
... more
Supply, installation, testing and commissioning of ceiling fan,copper wound,1200mm sweep,5 star rating including fixing of down rod of any length suitable from ceiling,canopy,mounting clamp etc.Ac,230 V, and connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 1.50 Sq mm from ceiling rose/ connector to fan. Make : Havells FUSION ESor equivalent in other makes as specified in the list of manufacturers complete all as specified. Note:-Rate quoted shall deemed to be included for suitable length of down rod from roof to false ceiling as directed by engineer in charge
711Each--
... more
Supply, installation, testing and commissioning of exhaust fan with 5 star rated electric single phase AC 230 Volts,Copper wound, PVC rust proof body, self opening louvers complete 300mm Sweep ,1300 RPM air delivery not less than 435 cu.mtr/min connect to ceiling rose all as directed. Make : Havells VENTILAIR DB NEOor equivalent in other makes as specified in the list of manufacturers complete all as specified
196Each--
... more
Design, Fabrication, Supply, Erection,Testing and commisioning of Powder coated Panel fabricated out of 14 guage CRCA sheet steel in cubical compartmentallised, free standing floor mounted on a base frame, totally enclosed, extensible type dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. The general construction shall confirm to IS:8623/93. Cable gland plates shall be provided on top as well as bottom of the panels with minimum 3mm thick plate. Panels shall be treated with all anti-corrosive process before painting as per specification, prepareably epoxy coated painting. Panels shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval of GAD along with BOM shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanize and Zinc passivated). Ingress protection shall be IP54 minimum for indoor use and IP 66 for out door purpose. Complete board shall be factory fabricated and ready for installtion at site. After the fabrication and before the despatching, the panel should be tested for high voltage test at 2.5 kv, insulation resistance test by 1000 v megger, polarity test, Power and control circuit's continuity test , operational test before the Engineer-In-charge/nominated person.
---
... more
MDB-1, MDB-2 (Squadron 1a) - Indoor type, INCOMER - 1 no. 250 A TPN MCCB ,36 kA MCCB having thermal magnetic releases for S/C, O/C, releases, IDMTL Protection for S/C, O/C releases with front drive kit. METERING & INDICATION - 1 set of phase LED indicating lamps, 1 Set of Breaker ON-OFF-TRIP indication Lamps, BUS BAR:- 1 Set of 315 A, TPN Aluminum bus bars with colour coded sleeves. OUTGOINGS - 8 Nos. - 63A, TPN MCCB with Thermal O/L and Magnetic S/C Protection and suitable extension of breaker terminals, with front drive kit complete all as specified
2Set--
... more
MDB-1, MDB-2 (Squadron 1b - Block 1 & 2) - Indoor type, INCOMER - 1 no. 200 A TPN MCCB ,36 kA MCCB having thermal magnetic releases for S/C, O/C, releases, IDMTL Protection for S/C, O/C releases with front drive kit. METERING & INDICATION - 1 set of phase LED indicating lamps, 1 Set of Breaker ON-OFF-TRIP indication Lamps, BUS BAR:- 1 Set of 315 A, TPN Aluminum bus bars with colour coded sleeves. OUTGOINGS - 6 Nos. - 63A, TPN MCCB with Thermal O/L and Magnetic S/C Protection and suitable extension of breaker terminals, with front drive kit complete all as specified
4Set--
... more
EXTERNAL WATER SUPPLY :- Cutting Existing CI tubing 150mm dia for alteration or additions 150*150*100mm CI Tee,CI collar for Tapping including necessary excavation and making good the surface all as specified (Each cut measures)
3Each Job--
... more
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab using 1:2:4 mix, type B1, using 20mm graded coarse aggregate including necessary excavation, foundation concrete uwing PCC1:5:10, type E2, using 40mm graded coarse aggregate and inside plastering with cement mortar 1:3, 12 mm thick, finished with a floating coat of neat cement complete as per standard design
47Each--
... more
EXTERNAL ELECTRIC SUPPLY : Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty)/ 11000 volts grade with stranded aluminium conductor of size 3 core 185 Sqmm complete all as specified
1200Running Metre--
... more
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 volts grade with stranded aluminium conductor of size 3 core 95 sqmm complete all as specified
60Running Metre--
... more
Supply and Installation commissioning & testing 11 KV Compact Sub Station with and including non extensible RMU consisting of 1 No, manually operated 11 KV/630 Amps VCB in SF6 insulated stainless enclosure,HT Cable/Bus bar ,1 No transformer 1000 KVA,11KV/433 & associated LT Distribution system , APFC panel & suitable capacity Battery bank, battery charger complete all as described & specified below:-
1Each--
... more
HT SWITCHGEAR - 11kV 630Amps 21kA for 3 sec. SF6 insulated Extensible Compact switchgear (Type CV) consisting of One No. Fixed Manual Load Break Switch and One No Fixed Manual Vacuum Circuit Breakers in SF6 insulated Stainless steel enclosure of 2.5 mm thickness having IP 67, with series trip,self powered microprocessor based numerical over current and Earth Fault (IDMT+Inst.) relay protection. Interconnection between HT switchgear and transformer shall be using 1Cx3x95 sq.mm Aluminium unarmorured XLPE Cable.(Make: ABB India Limited). - 1 No, Relay shall be Ashida make Model No: ADR241S relay with communication port.- 1 No, Protection CT: 40/1 Amps,2.5VA,5P10 - 3 nos, Manometer - 01 No, Operating Handle - 01 Nos
---
... more
TRANSFORMER - 1000 KVA, 11KV/433V DYn11 Oil filled fully hermatically sealed transformer with corrugated wall design & Top Bushings for LT with Off load tap switch of rating +5% to -10% in steps of 2.5%. Temp rise over amb temp 50 Deg C: 40/45 for Oil/Winding respectively. Insulation Class A; (Losses as per IS 1180 Energy Efficiency Star-2 ) Max Losses @ 50% Loading: 2790W and Max Losses @ 100% Loading:7700W. % Z- 5% ( IS Tol). (Make: Kotson/Danish/Nucon) - 01 Nos, Oil Temperature Indicator with Alarm and Trip Contact - 01 Nos, Winding Temperature Indicator with Alarm and Trip Contact - 01 Nos
---
... more
LVS PANEL- 1600AMPS ALUMINUM BUSBAR (100% FOR PHASE AND 50% FOR NEUTRAL, CURRENT DENSITY- 1AMP/SQMM) - INCOMER FROM TRANSFORMER - 1600AMPS 433V 3P 50 KA Manually Fixed type Air Circuit Breaker (ACB) with microprocessor Based over current, short circuit and earth fault Release (LSIG- PR 121).(Make: ABB India Limited) - 01 Nos, LED Type Indicating Lamps- R,Y,B Phase and ON-OFF-TRIP- 01 Set, Digital Multifunction meter of class 1.0 accuracy with RS485 Port ( Make: Rishabh/Conzerv/Secure/Eq)- 01 No. OUTGOING - 400AMPS 433V 3P 36KA Manually Fixed type Molded Case Circuit Breaker (MCCB) with Thermal Magnetic Based over current & short circuit fault Release. (Make: ABB India Limited) - 06 Nos, 630AMPS 433V 3P 36KA Manually Fixed type Molded Case Circuit Breaker (MCCB) with Thermal Magnetic Based over current & short circuit fault Release. (Make: ABB India Limited) - 01 No., 100AMPS 433V 3P 25KA Manually Fixed type Molded Case Circuit Breaker (MCCB) with Thermal Magnetic Based over current & short circuit fault Release. (Make: ABB India Limited) - 01 No.
---
... more
OUTDOOR ENCLOSURE - Outdoor type enclosure having construction of Galvanised Sheet Steel of thickness 2 mm for Load bearing member and 1.5 m for Non Load bearing member. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Polyuratne painted (Colour Light Gray & D.A.Gray ). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV and LV compartment. Seperate switch operated bulket lamp + Hooter shall be provided in Transformer compartment. - 01 Set
---
... more
APFC Panel CAPACITY 275 KVAR - APFC panel 275 KVAR complete with 630 A MCCB as incomer, APFC relay in 12 steps (25 Kvar x 10 + 15 Kvar x 1 + 10 Kvar x 1), Heavy duty Capacitor MPP type, capacity duty contactor of suitable rating with MCB of suitable rating, fan for heat discipiation and cooling of capacitor bank, auto / Mannual control switches, digital Meter etc - 01 Set
---
... more
INTERCONNECTION AND EARTHING - Interconnection Between HT switchgear & Transformer using 1Cx3x95 Sq.mm Aluminium unarmorured XLPE Cable. & Interconnection between Transformer & LT switchgear using Aluminium Busbars. Internal earthing connections by using 50 x 6 GI strips including Transformer Neutral earthing.- 01 job
---
... more
Note:- (a) Packge Sub-Station is outdoor plinth mounted type. Erection , Commissiong and Civil work for package substation shall be as per OEM specifications, (b) Package Sub-staion complete with the internal interconnections & earthing shall deemed to be included in the rate quoted.
---
... more
Supply and installation, commissioning & testing HT 11 KV, 3 phase, 50 cycles totally enclosed metal clad switchgear complete with Vacuum circuit breaker having rupturing capacity upto 350 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 630 Amp including 11 KV single phase in door resin cast CT of ratio 400/5- 5A class 1.0/ 5P10,burden 15VA – 15 VA all as per existing Make & model to match the existing HT panel in SS No 9. Note : The cost is inclusive for ecessary Modification of Existing HT panel for accomadating new VCB by extending HT panel including bus bar and accessories.
1Each--
... more
Supply and installation, commissioning & testing 12 KV SF6 out door Ring main unit (RMU) comprise of Two Nos 630 A Load Break Switch and 1 Nos 630 Amp Vaccum "T" OFF circuit breaker with self powered (3 O/C & 01 E/F) relays with RS-485 port for communication on MODBUS. RMU shall be one side extentable & inbuilt battery bank & battery charger of suitable capacity. (A) Load Break Switch 630 A - Load Break Switch shall be Mannualy operated, Earthing switch with making capacity, Live cable LED indicators throuh capacitor voltabe divider mounted on the bushing, Machanical ON / OFF earthing indication, suityable cable entry box for up to 3x300 Sq mm. (B) Vaccum Circuit Breaker 630 A - VCB shall be Motorised operated operated & earth switching with making capacity, Auxilary contacts, Live cable LED indicators throuh capacitor voltabe divider mounted on the bushing, Machanical ON / OFF earthing indication, self powered (3 O/C & 01 E/F) Relays should havy fecility to trip the breaker from remote command with out requiring shunt trip coil, suityable cable entry box for up to 3x300 Sq mm complete all as specified
1Each--
... more
Supply and fix cable jointing kit for 11 KV grade cable for indoor termination complete with jointing material cold shrinkable type and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 240 to 400 sq mm complete all as specified
2Each--
... more
Supply and fix cable jointing kit for 11 KV grade cable for indoor termination complete with jointing material cold shrinkable type and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 70 to 95 sq mm complete all as specified
1Each--
... more
Supply and fix cable jointing kit for 11 KV grade cable for straight through cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, AIuminium conductor cable of size 240 to 400 sq mm, Indoor/Outdoor type complete all as specified
1Each--
... more
M & L for earthing complete with galvanised steel earth plate electrode of size 600mm x600mmx6.0 mm thick burried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to and including galvanised strip 32 x 6mm, by means of bolts, nuts, check nuts and washeres made out of GI including protection pipe GI light grade 40 mm size and watering pipe 20 mm dia GI medium grade all as shown on plate No 3 of SSR Part-I, connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 140mm c/c in both ways, including necessary form work complete including necessry test on completion all as specified and as directed.
18Each--
... more
All as per item No.86 here-in-before but with 4 mm dia earth lead complete all as specified
4Each--
... more
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4 core 10 sqmm.(street lights) complete all as specified
1500Running Metre--
... more
All as per item No 88 Above but for cable size 4 core 25 Sq mm
75Running Metre--
... more
All as per item No 88 Above but for cable size 3.5 core 35 Sq mm
400Running Metre--
... more
All as per item No 88 Above but for cable size 3.5 core 150 Sq mm
80Running Metre--
... more
All as per item No 88 Above but for cable size 3.5 core 185 Sq mm
320Running Metre--
... more
Supply, installation, testing and commissioning of LT panel board CPRI approved with CRCA Sheet steel 3mm thick outdoor type cubical type compartmentalised, having busbar capacity 630A, ammeter with CT's, voltmeter, indicating lamps with and following breakers as incoming and Outgoings Incoming : 4 pole MCCB 400A, 415V, 50Hz with breaking capacity 50KA, O/C and E/F protection - 01 no. Outgoing : 4 pole MCCB 250A, 415V, 50Hzwith breaking capacity 35KA, O/C and E/F protection - 02 nos. (01 Spare), 4 pole MCCB 200A, 415V, 50Hz with breaking capacity 35KA, O/C and E/F protection - 02 nos (01 Spare)
3Each--
... more
Supply and fixing time switches 415V three phase of 20 A rating with Each contactor fitted inside steel enclosure complete all as specified
2Each--
... more
Supply and fix steel tubular swaged poles Type 410SP-22 (8.5 meter long) Swan Neck Type complete with CI base plate and finial tapper plug, bolts, nuts and washers and single swan neck, including 3 coat of bitumen paint internally complete and externally for the portion embedded in concrete and two coats of aluminium paint over a coat of red oxide primer to the balance portion of external surface and all as specified and directed and finial including foundation, coping and junction boxes and the junction boxes should be polycarbonate coating, etc., complete all as specified
31Each--
... more
Supply, installation, testing and commissioning of LED street light fitting 35/36W die cast aluminium housing 3600 lumen light output, Voltage Rating-220-240V, Input Frequency-50-60Hz, 5KV surge protection, power factor 0.95 THD less than 10%, IP66 protection and heat resisitant toughened glass with frame including all accessories and suitable bracket made out of GI pipe medium grade of dia 40 mm and length 1.6m bend in shape fixed on street light poles including mounting clamps and connecting wih flexible copper wires, etc., and tesing on completion all as specified and directed. Make: Philips - Green line BRP409 LED CW 036 MR FG S1 PSU GR or equivalent of CGL/Havells/Wipro complete all as specified
31Each--
... more
Supply, installation, testing and commissioning of TPN automatic change over ACCL (TPN/TPN) with GEN START/ STOP 63Amps inside the metering panel. Make : Havells make or equivalent in other makes as specified in the list of manufacturers complete all as specified
4Each--
... more
Supply and fixing of solar all in one LED street lighting - smart integrated solar street light with build in Poly Crystalline Panel, lithium ferro phospate (LiFePO 4) battery, MPPT charge controller and PIR sensor and 6mtr height pole. Philips catalogue no. BRP710 LED45 CW MR S1 12V LFP Solar IN or equivalent in other makes as specified in the list of manufacturers complete all as specified
5Each--
... more
Riddled soil as earth cushioning to UG cable by using IS sieve to separate the composite particle/roots etc and refilling/spread in trenches as cushioning and rammed down to form a solid bed all as specified and as directe. Note:- 1. Punned thickness shall be measured and paid seperately. 2. Excavated approved soil shall be riddled by using sieve to separate composite particles etc as per IS.
212Cubic Metre--
... more
Miscellaneous: Rigid non-metalic PVC conduit exclusive of boxes (junction / terminal but inlcusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of dia 25 mm complete all as specified
600Each--
... more
SEWAGE DISPOSAL : Supply and laying of 180mm dia DWC PE Pipe for sewage disposal purpose including all fixtures and fittins complete all as specified
1635Running Metre--
... more
Supply and laying of 200mm dia DWC PE Pipe for sewage disposal purpose including all fixtures and fittins complete all as specified
638Running Metre--
... more
Supply and laying of 300mm dia DWC PE Pipe for sewage disposal purpose including all fixtures and fittins complete all as specified
350Running Metre--
... more
RETAINING WALL : Supplying and laying 100mm dia PVC pipe (LDPE) of rating 6kg/cm2 for Weep holes complete all as specified.
2040.6Running Metre--
... more
LIGHTNING PROTECTION : - Supplying, intallation, testing and commissioning of the advanced lightning protection "Collection Volume Method Type" Air terminal for coverage for 100mm dia with all accessories required for its proper functioning. (a) Supply, install multistranded single core copper conductor of size 50Sqmm of length approx 50RM terminated at the earthing test point (b) Supplying, installation, testing and commissioning of the lighting strike recorder for lightning strikes captued by the air terminal. The recorder sensitive range of 1500amps to a maximum of 220 KA @ 8/20us. (c) Supplying, installation, testing and commissioning of efficient earthing system with copper binded earth rod, clamp, copper tape, ground resistance improvement powder (GRIP) all as required including excavation of earth etc as required as per manufacturer recommendation of 2 nos. with earth value 1 ohm
3Each--
... more
FIRE FIGHTING SYSTEM : Supply and install booster pump 30 meter head discharge 900 LPM (01 as main pump) complete all as specified
3Each--
... more
Supply and fix Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete all as specified
3Each--
... more
Supply and fix Strainer Y type conforming to IS, size 150 mm (6”) dia complete all as specified
3Each--
... more
Supply and fix MS flanged pipe 100mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified
572Running Metre--
... more
Supply and fix MS flanged pipe 150 mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified
15Running Metre--
... more
Supply and fix MS flanged pipe 25 mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified
56Running Metre--
... more
Supply and lay pipe ductile iron, D/F including specials, class “K-9”, 100mm (6”) dia at External below ground level complete all as specified
75Running Metre--
... more
Supply and fix hose box for keeping 2 Nos hose pipe of length 15mtr each, branch pipe, nozzle coupling etc of MS sheet of thickness 2.0mm complete all as specified
28Each--
... more
Supply and fix 63mm dia gun metal branch pipe with nozzle conforming to IS 903 complete all as specified
28Each--
... more
Supply and fix hose reel of 19/20mm size of 30 mtr length complete with coupling branch pipe and nozzle, gate valve, MS sheet 2mm thickness complete all as specified
28Each--
... more
Supply and fix pressure gauge 100mm dia with ball valve of pressure 25Kg/Sqcm complete all as specified
3Each--
... more
Supply, laying and testing cable XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 110 volts grade with stranded aluminium conductor of size 3.5 core Sq mm complete all as specified
135Running Metre--
... more
Supply and fix wall mounted LED emergency exit sgnage luminaire lit up using regular mains supply with a unique rechargeable Ni-cd battery of emergency backup upto 05 hours (Cat No. LSSR5W make CG or equivalent in Bajaj / Havells complete all as specified
18Each--
... more
Supply, installation, testing and commissioning of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS 10001/10002 and alternator as per IS 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norm and foundation etc, of capacity 40 KVA as specified below :-
1Set--
... more
Silent diesel engine driven generating set with AMF PANEL panel 40 KVA with water cooled engine of suitable BHP for 32 KW power generation @ RPM 1500, brushless frame with silencer and Canopy for sound less mode (sound level not exceeding level specified by central pollution control board) and all engine accessories such as self starter, alternator/dynamo and 32 kW/40 kVA electric alternator, 415 volts, 3 phase, 4 wire,50 Hz, Voltage Regulation ± 15, Insulation class H coupled to engine with suitable coupling and base frame on foundation as recommended by the manufacturer and consisting of other electrical components, fuel tank of capacity of not lesss than 200 ltrs with level indicator installed on suitable steel frame with PCC foundation as per manufacturers instructions, Power Command genset Controller, fuel pipes, Dual spin on fuel filter, Dritype Aircleaner, Shutt off coil with safeties for LLOP/HWT , fuel pipes , bar metre, hour meter , oil temperature gauges, ammeter, ignition switch, radiator with cooling fan, maintanance free battery battery, including suitable size of copper cable leads with terminals, all mountings, accessories and necessary foundation and AVM pads complete as per manufacurers recommendations and to the satisfaction of Engr in charge. MAKE: /CUMMINS/ LEYLAND/KIRLOSKAR (or) equivalent as per approved makes.
---
... more
PRIME MOVER :- Suitable for driving 32 KW/40 KVA alternator water cooled battery staart diesel Engine of ade3quate capacity 32 BHP confirming of BSS 649 and fuel tank suitable for 12 hrs running capacity mounted on MS frame pedestal supported with anti-vibration mounting rated for continuous running capable of taking 10% over load for one hr in any 12 hrs operaton complete with the following standard accessories :- a)Fly wheel to match with the flexible coupling b)Flexible coupling wih guard c)Air cleaner oil bath type / dry type d)Lubricating oil filter, fuel filter paper element type e)Blower type fan and radiator f)Governor for class "A" Goverming as per IS-1601 of DS 649/1958 g) Starter. Motor for electric start complete with dynamo altermator , lead acid batteries heavy duty of capacity 12 V 70 Ah or adequate size, Nos & capacity as required with copper conductor leads of adequate size and length not less than 2 M including battery box all as directed. h) Hour meter and RPM indicator i) Exhaust pipe brough outside the building and lagging of entire length of exhaust pipe with 12 mm dia. j) Instrument panel duly wired comprising the following including protection for low lub oils high temperature :- k) Lube oil pressure gauge m) Battery change indicator meter n) Starting switch with key o) Lub oil temperature p) Water temperature
---
... more
ALTERNATOR : 20 KW/25 KVA at 0.8 PF Brushless self excited, self regulaed 3 phase 50 Hz 415 V 1500 RPM 4 wire screen protected drip proof free from simulation problems continuous rating confirming to BS 2613 complete with automatic voltage regulator O/P voltage regulated between +/- 1% or set voltage from no load to full load.
---
... more
AUTOMATIC MAINS FAILURE PANEL :- AMF panel for 32 KW/40 KVA DG Set fabricated out of sheet steel factory made suitable for floor mounting hinged from panel for easy asessibility with suitable rated bus bar internal wiring and with provision for connecting incomming/outgoing leads with the folowing accessories :- a) HRC fuse ( - 06 Nos) of proper rating for Both in coming and MCCB 63 Amps4 pole - (02 Nos-) for incoming b) Auxillary contrqactors 63 Amps ,415 Volt , 3 Phase, 4 Pole with timer (on delay)- 02 Nos c) Voltmeter digital with selector switch - 01 No d) Ammeter degital with selector switch - 01 No e) Frequency meter digital with selector switch - 01 no f) Power factor meter digital type - 01No g) KWH meter electronic digital type - 01 No h) Two set of indicator lamps 6 Nos LED Type for main and DG indication i) Master switch for auto/manual/test/off, j) One set of lamps for indicating "load on set" "load on mains"set fails to start" low oil pressure" high cylinder tamp" " battery low" k) Alarm/Hooter l) Bty charger connected to main supply side to charge bty comprising the following :- m) DC ammeter & voltmeter digital type n) Charge rate selection for tricle or high charge o) Indicator lamp for qty p) Set for easily accessible control fuses q) Set for relays to auto-start the engine on main failure and low voltage. r) Emergency trip
---
... more
Note: i) any fittings/fixtures which are necessary for proper functioning of the DG set shall also be deemed include in the unit rate quoted and shall be provided by the contractor without any extra cost to the Dept. ii) Necessary foundation for installation of DG set shall be provided as per manufaturers recommendations and cost deemed to be inclusive in the rate quoted for this item. iii) All testing equipments are to be arranged by the contractor and testing shall be carried out by the contractor in presence of Engr-in-Charge and testing result duly signed by the Engr-in-charge and the contractor shall be kept in Record. iv) Rate quoted by the contractor including the rate of first filling of lubricating oil, Coolent and duct with wooden cover from DG set to AMF Panel. AMF panel must be out side the canopy. (v) Drawings/cataloge for DG Set and AMF panel got approved by the GE before ordering to the manufaturer.
---
... more
COOLING APPLIANCES:- Water cooler fully stainless steel Electric driven (single phase) having approx storage capacity of 80 litres and nominal cooling capacity of 40 litres per hour having minium 5 star rating all as per specification and upto the satisfaction of Engineer in Charge.
34Each--
... more
Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 1 KVA complete all as specified
34Each--
... more
HOT WATER SUPPLY Supply and fix water heater storage type eletric capacity 25 ltr BEE 5 star rated complete all as specified
144Each--
Total Amount ₹ 59.2 Cr
Quoted Amount
Calculate Bid Estimation
-5
×
%
₹ 56.3 Cr
http://bit.ly/2y8uxEJ

CA NO. CE(NW)/KOCHI/EZH/ OF 2020-21 Serial Page No.08 In lieu of IAFW-2162 (Revised) MILITARY ENGINEER SERVICES NOTICE OF TENDER 1. A tender is invited for the work as mentioned in Appendix ‘A’ to this NOTICE INVITING TENDER(NIT). 2. The work is estimated to cost as indicated in aforesaid Appendix ‘A’. This estimate however is not a guarantee and is merely given as a rough guide and if the work costs more or less, the bidder will have no claim on that account. The tender shall be based on as mentioned in the aforesaid Appendix ‘A’. 3. The work is to be completed within the period as indicated in the aforesaid Appendix ‘A’ in accordance with the phasing if any, indicated in the tender from the date of handing over of site, which will be on or about 2 weeks after the date of acceptance of the tender. 4. Normally contractors whose names are on the MES approved list for the area in which the work lies and within whose financial category the estimated amount would fall, may tender/ bid but in case contractors of categories 'SS' to ‘E’ may tender/bid. Contractor's whose names are on the MES approved list of any MES formations and who have deposited Standing Security and have executed Standing Security Bond may also tender / bid without depositing Earnest Money along with the tender/ bid and if the tender/ bid submitted by such a tenderer/ bidder is accepted, the contractor will be required to lodge within 28 days of receipt of the letter of Acceptance, Performance Security in any of the forms given before for an amount equivalent to 5% of the contract sum in favour of the Accepting officer. Not more than one tender/ bid shall be submitted/ uploaded by one contractor or one firm of contractors. Under no circumstances will a father and his son(s) or other close relations who have business dealing with one another be allowed to tender/ bid for the same contract as separate competitors. A breach of this condition will render the tenders/ bids of both the parties liable for rejection. 5. The Office of Chief Engineer (NW), Naval Base PO, Kochi-4 will be the Accepting Officer hereinafter referred to as such for the purpose of this contract. 6. The Technical Bid and Financial Bid (Cover-1 and Cover-2) shall be uploaded by the tenderer/bidder on or before the date & time mentioned in NIT. A scanned copy of DD with enlistment details/documents shall be uploaded as packet 1/cover-1 (T bid) of the tender/bid on e-tendering portal. DD is refundable in case T bid is not accepted resulting in non-opening of Q bid. The applicant contractor shall bear the cost of bank charges for procuring and encashing the DD and shall not have any claim from Government whatsoever on this account. 7. Tender from and conditions of contract and other necessary documents shall be available on eprocuremes.gov.in / eprocure.gov.in site for download and shall from part of contract agreement in case the tender/bid is accepted. 8. In case of contractor who has not executed the "Standing Security Bond" the Cover-1 shall be accompanied with by Earnest Money" of amount as mentioned in Appendix 'A' in the form of deposit at call receipt in favour of GE by a Scheduled Bank or in receipted treasury challan, the amount being credited to the revenue deposit of the GE. (See Appendix ‘A’) . 9. Refer condition 19 of IAFW-2249 10 The GE (P) Ezhimala will return the Earnest Money, wherever applicable, to all unsuccessful un- enlisted bidders/tenderers by endorsing an authority on the deposit-at-call receipt for its refund . 12. The GE (P) Ezhimalawill either return the Earnest Money to the successful tenderer/ bidder, by endorsing an authority on the deposit-at-call receipt for its refund, on receipt of an appropriate amount of Performance Security or will retain the same in part or full on account of Performance Security if such a transaction is feasible.

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.