Malabar Cancer Centre Tender

od245834/2023_2024 : Providing and applying Cement Texture painting by using with spray gun machine with Asian or equivalent approved product one-coat primer and two-coat painting. the rate includes all costs of materials, labour and scaffolding charges etc. complete as per the specification and direction of the Architect or Engineer as per the approved design.

od250235/2023_2024 : Providing and fixing Curtain boarder for windows with 12mm thick Plywood and 4mm veneer finish (Used in Century or Green plywood, veneer, ISO Marine 710 grade, BWR) and nice smooth surface finish papering and applying semi Mat finish spray painting work (Asian or equivalent approved make paint) including material and labour charge as per Architect or Engineer Approved design.

od250236/2023_2024 : Providing and fixing Wall/Ceiling Paneling work with 16mm plywood in plane level, applying 12mm Ply, 4 mm veneer above 16mm plywood with minimum 10mm groove finish, provide strip light gape in the end. (Used in Century or Green plywood and veneer ISO, Marine 710 grade, BWR) and nice smooth surface finish papering and applying semi Mat finish spray painting work. (Asian or equivalent approved make paint) complete with necessary SS Screws, bolt etc. and frame work. including material and labour charge as per Architect or Engineer Approved design.

od250237/2023_2024 : Providing and placing 1200mm lengthx200mm widthx25mm Thick well seasoned Irul Wood carving Piece with CNC Cutting and 25mm outer frame near living area and semi Mat finish Brush painting (Asian or equivalent approval paint) work including material and labour charge as per Architect or Engineer approved design.

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

od250238/2023_2024 : Supplying and fixing Roman blinds by using Clipping type M track and aluminium channel with Controller, Pleated stitching fabric, Steam Iron, fixing inside window Boarder including material and labour charge as per Architect or Engineer Approved design and selection.

od250277/2023_2024 : Providing and constructing Niche units of size 800 mm lengthx500 mm widthx100 mm depth by using 12mm thick Plywood, 4mm veneer (Used in Century or Green plywood /veneer ISO Marine 710 grade, BWR), nice smooth surface finish papering and applying for semi Mat finish spray painting work (Asian or equivalent approved paint) complete with necessary SS Screws, gypsum screws etc including material and labour charge as per Architect or Engineer Approved design. work includes cutting of wall, plastering with CM 1:3, 12mm thick, applying cement primer etc. complete

od250278/2023_2024 : Providing and fixing Wooden finish pergola of size 2300mm lengthx220mm widthx60mm thick using with 18mm thick Plywood, 4mm veneer(Used in Century or Green plywood /veneer ISO Marine 710 grade, BWR), Covering existing arch design using plywood and nice smooth surface finish papering, applying semi Mat finish spray painting work (Asian or equivalent approved make paint) complete with necessary SS Screws, bolt, gypsum screws etc including material and labour charge as per Architect or Engineer Approved design.

od250279/2023_2024 : Supplying and fixing Zebra line type blinds using aluminium channel with Controller fitting inside window Boarder including material and labour charge as per Architect or Engineer Approved design and selection.

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

od251654/2023_2024 : Providing and laying 900x300x25mm,900x450x25,900x300x50mm thick Flamed Granite paving stone with 20mm smooth edges cutting in four side, providing 50mm horizontal gape in between stones, fixing 10-16mm thick 6mm broken stone aggregates (baby metal stone) near pathway, Driveway area. 400x400x50mm thick Flamed Granite paving stone with 20mm smooth edges cutting in four side fixing in minimum 10 mm gape near porch, with strong vibratory compaction, of approved design, laid in required pattern over compacted bed of stone aggregates etc. all complete as per the direction of Engineer-in-charge. work includes levelling, loading unloading charge, material and labour charge complete.

od251655/2023_2024 : Supplying and placing 600mm height Buddha making by stone with Rustic finish including loading unloading charge, material and labour charge as per Architect or Engineer Approved design.

od251697/2023_2024 : Providing and planting of following plants like Budhas bamboo, crape jasmine plant, Lady palm, Plumeria alba, Thunbergia creeper, Golden cascade creeper, Water bamboo after preparing the ground with proper level and ramming with required tools, watering<br>with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer in charge. number of each Items shall be decided as per site condition

od251698/2023_2024 : Providing and laying Korean grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light watering with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

od251756/2023_2024 : Polishing of stainless Steel handrail with the chemical paste using machine and hand power with neat and clear without rust, buffing etc complete, including material and labour charge as per Architect or Engineer Approved design.

6.29.2 : Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 ( 1 cement : 6 coarse sand)Above plinth level and upto floor V level

od251783/2023_2024 : Painting with MRF clearcoat finish Two or more coats of over an undercoat of flatting varnish

9.88 : Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.