Kerala Tourism Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_KTDC_631364_2Bid Award Id
ViewTender No
KTDC/EW/BPH-Caravan/2023Tender Authority
Kerala Tourism Development Corporation Limited ViewPurchaser Address
-Website
http://https://www.ktdc.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
1000
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
12.35
-
-
5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
4.03
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
40.32
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
612.36
-
-
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
1500
-
-
12.59.1 : Providing and fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27 mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with.a.8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through acutoclaving process.
123.48
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
716.83
-
-
13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
840.31
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
840.31
-
-
13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
840.31
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
70.56
-
-
11.41.3 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm
52.92
-
-
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
145.74
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
125.76
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
125.76
-
-
21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
15.12
-
-
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
16.32
-
-
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
46.37
-
-
50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
55.77
-
-
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
176.64
-
-
Plumbing and Sanitary Works
-
-
-
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
20
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
20
-
-
18.9.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work32 mm nominal outer dia pipes
10
-
-
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
20
-
-
50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
25
-
-
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
20
-
-
50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
5
-
-
50.18.9.20.2 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow
5
-
-
50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow
5
-
-
50.18.9.22.2 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
5
-
-
50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
5
-
-
50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
5
-
-
50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
5
-
-
50.18.9.22.10 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap
5
-
-
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
4
-
-
17.4.4 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern
3
-
-
17.7.1 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
8
-
-
17.32.2 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm
8
-
-
50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
8
-
-
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
8
-
-
18.50.1 : Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore
8
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
8
-
-
18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
4
-
-
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
24
-
-
od247785/2023_2024 : Supplying, Installing, testing and commissioning approved make 15mm CP shower unit comprising of CP 15mm dia single lever divertor with CP spout, overhead shower set comprising of CP shower arm, rose etc.,complete with CP wall flanges. Jaquar
4
-
-
od247786/2023_2024 : Providing a RCC septic tank of 50 flush per day including all necessary conveyance, fixing charges etc. all complete
1
-
-
Land Development Works
-
-
-
30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
300
-
-
30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
300
-
-
30.2.14.3 : Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep
30
-
-
30.2.25 : Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment).
30
-
-
16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
544.5
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
3.2
-
-
16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
225
-
-
16.78.1 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
54.45
-
-
od247783/2023_2024 : Supply and installation of shrubs as<br>specified in the detailed drawing including the cost<br>of all transportation, excavation of pits in suitable<br>sizes, planting, filling with available red soil,<br>manure, sand ,etc. complete but excluding cost of<br>red earth & sand. Calathea lutea, Alocasia Macrorrhizos etc (Ht 4ft to 5 ft)
30
-
-
30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
1018
-
-
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
400
-
-
Tent and Platform
-
-
-
od247775/2023_2024 : Providing elevated platform of size 3m x3m for fixing the tent at 30 cm above the ground level. The platform shall be in 18mm thick cement board with GI supporting sections fixed properly with ground etc. complete as per direction of engineer in charge.
3
-
-
od247778/2023_2024 : Supply of camping shelter (arpenaz base l fresh quechua/equivalent) having a square living room of 3 m on each side, or 9 sqm | Living room height 2.25 m | Door height 1.85 m. Simple to set up with aluminium tubes for the structure and fibreglass hoops for the roof. The living area structure should be self-supporting. Ti0² -coated fabric with SPF 50+. Door with a mosquito screen window. Tent should remain habitable in wind speeds up to 50 km/h near the ground.
3
-
-
Furniture
-
-
-
od247777/2023_2024 : Supply of chair made of solid mahogany wood with 10years replacement guarantee from wood powdering joint shake and crack fabricated with premium jamevaar/sarom fabric with foam,fabric and stitching. The rate includes all labour, material and transportation cost etc. complete
16
-
-
od247779/2023_2024 : Supply of 4 seater granite top dining table with frame made of metal with painting for different sizes The rate includes all labour, material and transporation cost etc. complete.
4
-
-
od247781/2023_2024 : Supplying of steel almirah
4
-
-
od248086/2023_2024 : Supply of bunker bed
4
-
-
A Frame Cottages
-
-
-
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
4800
-
-
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
1640
-
-
od248340/2023_2024 : 16mm cement fibre board connected over the GI<br>frame
77
-
-
26.49.1 : Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light weight solid core panels made of core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kg per cum) adhesive, cement, sand, flyash and other bonding material in mortar state processed to form in a preset mould. The outer face on both sides of the panels will be non asbestos fiber cement board confirming to IS 14862:2000 or Calcium silicate board confirming to EN 14306:2009 of 5mm thick each. Panel shall be laid on 6mm thick cement mortar (1 cement: 2 fine sand) mixed with chemical adhesive of 0.5kg per 50kg of cement or shall be preferably fixed into 'C' channel made of 1.2mm thick MS plate screwed/fastenened to the slab/column/beam etc. The panel shall fixed vertically with tongue and groove joint and horizontally locked with steel bar between each other and floors and filled with cement mortar and adhesive. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is included except "C channel" which will be paid seperately).Non load bearing panels 50mm thick of required size
31.92
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
7.2
-
-
11.41.3 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800x 800 mm
69
-
-
od248495/2023_2024 : Providing and fixing King Size Cot & matress (1.93m x 2.03m)
2
-
-
od248497/2023_2024 : One set of drawers using 18 mm commercial ply at bottom, top, sides and rear. 12 mm thick Commercial ply finished with 1 mm thick laminate at front side with necessary teak wood lipping telescopic drawer slides, locking arrangements, 100 mm long brush finish SS handles etc. complete size - 450X450X450mm
2
-
-
od248498/2023_2024 : Study table with drawer & chair-Providing and fixing study table of 1200 x 600x750mm high with drawer unit to detail as per drw . Comprising table top out of 18mm commercial ply with stiffner of same commercial ply 100mm wide below the table and 10 x 37mm. Second class teak wood beadings finished with two coats of duco paint to shape along edges. Table top finished with 1mm thick laminate of approved colour and shade. On front and side of drawer finished with 1mm thick laminate and additional 18mm com. ply is fixed on front side to pattern with necessary grooves and finished with 1mm thick laminate of approved colour and shade Foot rest cum Mini bridge stand of required length with same 18 mm com. Ply finished with 0.8mm thick laminate Keyboard tray made out of 18 mm com.ply finished with 1mm thick laminate of approved colour and shade. 50mm Dia SS wire manager of approved quality . Supply & fixing study table chairs as per the Architect approved model. All concealed faces of comply finished with one coat of wood preservative paint and exposed faces of Second class teak wood beadings finished with two coats of duco paint to the satisfaction of the Client/ Architect. Table, inside should be finished with 0.8 mm thick laminate of approved colour and shade
2
-
-
od248529/2023_2024 : Centre Table - Providing and fixing centre table to detailed drawing of overall size 750x500 and 450mm height made out of 4 nos of 'L' shape 50 x 25mm steam beech wood leg and top interconnected with 25 x 25mm steam beech wood & finished with melamine polish.Top finished with 12mm thick clear float glass with Bevelled edges with necessary fixing arrangements.<br>
2
-
-
od248530/2023_2024 : Supply and installation of single seater pull out sofa of approved size made of matte finish rubber wood legs and framework of<br>maranti hardwood, upholstered with approved colour of leatherette semi PU 1mm thick with backing seat of 6" premium density foam of 28kg/m3 cushion and back cushion of hollow siliconized conjugated fibre polyster of 15 density
2
-
-
od248531/2023_2024 : Luggage rack-Providing and fixing low level Medium Height Lugage rack to detail of drawing about 450mm wide and 750 / 1200mm high comprising 18 mm thick com ply fixed at top, sides and bottom at 75mm and one intermediate with necessary SS bracket and rear side Side hung shutters in 2 leaves with 18 mm thick comply and on top finished with 1mm thick laminate of approved colour and shade, including necessary grooves,Box type hinges, locking arrangements, 100mm long C Shape SS brush finish handles, Tower bolt , Ball catch etc. complete. finished with 8mm thk com ply finished with 1mm thick laminate of approved colour and shade. Storage top 10 x 37mm. MDF beadings finished with two coats of duco paint to shape along edges.<br><br>
2
-
-
od248532/2023_2024 : Wardrobe-Providing and fixing full height wooden self unit with shutter of 25 mm thick BWR ply with laminate finish of size 2100 mm high and 600 mm deep to detail comprising , 19 mm thick BWR ply for top, sides, 4 intermediates and bottom at 75mm level. Storage back 19mm thick BWR ply finished with 1mm thick laminate and 4 horizontal grooves in shutters front of 6 mm x 6 mm also with half<br>round nosing laminated edge finish of required leaves with necessary, TW lipping, box type hinges, tower bolts, locking<br>arrangements, ball catch, 150mm long SS Brush Finish handle etc., complete
3.36
-
-
od248539/2023_2024 : Supplying, fixing and testing PVC Multi floor trap (heavy duty hinged type) with brass CP frame & cover (150 mm x 150 mm square / 125 mm round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete etc., complete. (The frame and grating shall be approved by Architects)
2
-
-
od248545/2023_2024 : Supplying and fixing approved make mirror of size required sizes with necessary fixing screws etc complete
1.44
-
-
od248547/2023_2024 : Supplying and fixing approved make C.P. Soap dish with necessary fixing materials Jaquar Make
2
-
-
od248548/2023_2024 : Supplying and fixing approved make C.P. towel rail with necessary fixing materials Jaquar Make - ACN-1111SM
2
-
-
od248549/2023_2024 : Supplying and fixing approved make C.P. towel ring with necessary fixing materials Basic cost = 480, Jaquar Make - ACN - 1121BN
2
-
-
od248550/2023_2024 : Supplying and fixing approved make C.P. Robe hook with C.P. screws etc., complete. Fixed on the toilet door Basic cost = 480, Jaquar Make - ACN1161N
1
-
-
od248551/2023_2024 : Supplying & fixing of approved make 15mm CP two way bib cock with necessary CP wall flanges etc., complete. Basic cost = 2050, Jaquar Make - FUS29041
2
-
-
od247785/2023_2024 : Supplying, Installing, testing and commissioning approved make 15mm CP shower unit comprising of CP 15mm dia single lever divertor with CP spout, overhead shower set comprising of CP shower arm, rose etc.,complete with CP wall flanges. Jaquar
2
-
-
od248552/2023_2024 : Supplying, fixing, testing and commissioning approved make wash basin white colour fixed below counter with 32mm dia CP waste coupling, 32mm dia C.P.bottle trap with C.P. extension pipe, 1 No. 15mm dia C.P. angle cock 1 No. C.P. flexible inlet connection pipe G.I. expansion bolts etc., complete including silicon sealant Basic cost of wash basin = 2400 & Pillar Cock = 1750, Referred Model Jaquar Make wash basin - CNS-WHT-705 , Jaquar Make Pillar cock - FUS29001
2
-
-
od248553/2023_2024 : Supplying, fixing, testing and commissioning of approved make white colour European water closet wall mounted with concealed tank The quoted price shall also include installation of brackets, plastic solid seat cover with rubber buffers and flap, Heavy<br>duty plastic hinges etc., complete. Basic cost of closet = 12000 & concealed cistern with flush plate = 5900, Referred Model Jaquar make Closet - VGSWHT-81953UF, Jaquar Make Concealed Cistern - JCS-WHT-2400WP, Flush Plate - JCP-CHR-292415
2
-
-
8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,
in skirting, risers of steps and dados, over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
31.92
-
-
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
168
-
-
12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
21
-
-
12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
168
-
-
25.3 : Providing, assembling and supplying vision glass panels (IGUs) comprising of
hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units
of size and shape as required and specified, comprising of an outer heat
strengthened float glass 6mm thick, of approved colour and shade with reflective
soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned
clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary
seal and secondary seal (structural silicone sealant) etc. all complete for the required
performances, as per the Architectural drawings, as per the approved shop
drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall
be assembled in the factory/ workshop of the glass processor. (Payment for fixing
of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment,
only the actual area of glass on face # 1 of the glass panels (excluding the areas of
the grooves and weather silicone sealant) provided and fixed in position, shall be
measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on
face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make
having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection
internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-
0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance
glass shall be decided by technical sanctioning authority as per the site requirement
42
-
-
Kitchen Equipments
-
-
-
od249577/2023_2024 : Supplying Centre table with two under shelf and one over head shelf( 180x75x85+45). The rate includes all material charge, conveyance charge etc. complete.
1
-
-
od249578/2023_2024 : Supplying Granite top Table with one under shelf and back splash(100x6085+15).The rate includes material charge, conveyance etc. complete.
1
-
-
od249579/2023_2024 : Supplying 3 sink washing unit with under cross belt (165x60x85+15) . Sunken top. back splash. The rate inc;udes all material charge, conveyance etc. complete.
1
-
-
od249580/2023_2024 : Supplying juice table with sink(RHS) and One Under Shelf ( 150x60x35+15). Sunken top. one overhead shelf. Back splash. The rate includes all material charge, conveyance etc. complete.
1
-
-
od249581/2023_2024 : Supplying of Five Tier sheet rack for plates and gasses (180x55x45). The rate includes material charge, labour charge etc.complete.
1
-
-
od249582/2023_2024 : Supplying S S SINK washing unit (60 x 60 x 85+15 cm) with under cross belt. The rate includes all charges such as material, labour conveyance etc.
1
-
-
od249583/2023_2024 : Supplying Work table with one under shelf and back splash ( 115x60x85+15). The rate includes all material, labour charge etc. complete.
1
-
-
od249584/2023_2024 : Supplying 2 BURNER Indian Cooking RANGE (110x60x85+15) with One Under Shelf and all side burner area covering with air ventilation. The rate includes all material charge, labour charge, conveyance etc complete.
1
-
-
Electrical works
-
-
-
Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988,fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point
19
-
-
Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of
copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined
plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points
5
-
-
Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of
copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control
light point without ceiling rose - Medium point
12
-
-
Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth
socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.(RoHS complaint Modular accessories)brFour points controlled by one 1 way 6A SP switch(Medium)
3
-
-
Two Point controlled by one one way switch
21
-
-
Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of
copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Twin Control
light point with 6A, plate ceiling rose - Medium Point
2
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm
25
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm
25
-
-
Supply and installation of 20A electronic key tag including all accessories on existing modular box including modular plate
2
-
-
Supply,conveyance,Installation,Testing and commissioning of exhaust fan of the following sizes using slandered accessories with 16/0.20mm PVC insulated and PVC sheathed 650/1100v grade 3 core round copper conductor flux wire or with extended original wiring etc as required 200 mm exhaust fan 230V/240V single phase A/c
2
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
26
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box
including connections but excluding modular plate etc. as required.15/16 amp switch
16
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box
including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
16
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box
including connections but excluding modular plate etc. as required.Telephone socket outlet
3
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
4
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
12
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.as required
9
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5sq.mm + 1x1.5 sq.mm earth wire
330
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
260
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
100
-
-
Supply of Decorative Wall Light fittings Holder base B22 working on 240V, 50 Hz AC supply.(Make:Classic Art Lamps Model No:CL_WD_WL_049)
4
-
-
Supply of 20W LED tube fittings working on 240V, 50 Hz AC supply.
17
-
-
Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required
66
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 8way, Double door.
7
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 12 way, Double door
1
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
43
-
-
Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL
1
-
-
Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 2 pair
30
-
-
Supplying & Drawing unarmored PVC insulated and & PVC sheathed copper conductor Telephone Pair Cable conforming to ITD specification for indoor application through the existing conduit 4 pair
50
-
-
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 50 sq mm with factory made clamp
50
-
-
Supply of 1200mm sweep 5 star rated BLDC motor (Brush Less DC motor) Ceiling fan working on 230/240V single phase AC supply including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.complete with all accessories such as remote control etc
9
-
-
Supply and drawing bare earthing conductors of 3.15 mm copper conductor (No. 10 SWG) along with wiring/ cables and giving earth connection as required.
120
-
-
Supply and installation of 150mm light duty exhaust fan of good quality and reputed make with self opening louvers working on 240V single phase AC supply.
7
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required
3
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required
4
-
-
Supply of 12 W Round Concealed CEILING LED fittings including all the accessories like clamps,screws and standard length connection leads etc. required for fixing and working on 240 V, 50 Hz AC supply
8
-
-
Supply of 6W LED recessed ceiling fitting type Light fitting of good quality and reputed make
12
-
-
Supply of the 3W Spot LED Ceiling Concealed fittings including suitable driver unit for use on 230V AC Supply including all accessories required for fixing etc. complete of good quality and approved make.
23
-
-
Supply of the Toilet Mirror Light (Wall fittings suitable for mirror side) including all the accessories like clamps,screws and standard length connection leads etc. required for fixing and working on 240V, 50 Hz AC supply
2
-
-
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
100
-
-
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 50 sq mm
50
-
-
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp
50
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)
2
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (butwithout MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door
1
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
8
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm)
2
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
10
-
-
Supply of good quality and reputed make 3C x 2.5 Sq.mm armoured copper cable for pole lighting at site.
100
-
-
Charges for fixing the Bollards and post top lights in the foundtaion and giving connection etc complerte as required at site
35
-
-
Supply of 12W outdoor LED garden bollards (Warm White) (Make- Luker Model -LODBS 12) including all accessories for fixing etc complete as required at site
20
-
-
Supply of 5W outdoor LED Garden spike lights (Warm white (Make- Luker, Model-LSSPK5W) including giving connectionetc as required at site
5
-
-
Supply of Aluminium synthetic 8W LED post light fitting for use on 240V AC Supply including all
accessories required for fixing etc. complete of good quality and approved make. Make-Philips -
Robin,Model No.15473/30/16
15
-
-
Supply and laying 20mm PVC pipe (Medium) of good quality through the ground including 3R x 1.0 Sq.mm wire for looping.
50
-
-
Charges for providing suitable size foundation (1ft x 6 inchx 6 inch) in cement concrete 1:2:4 for fixing bollard lights including providing 32mm PVC pipe for cable entry and exit.
35
-
-
Charges for ground excavation for laying cable direct in ground and refilling the trench etc as required but excluding sand cushioning and protective covering
75
-
-
Approval And Sanctions from KSEB &amp; Electrical Inspectorate
-
-
-
Obtaining necessary approvals from the electrical inspectorate/KSEB or other statutory bodies required for the work including all documentation, drawing, liaison charges etc (statutory fees paid will be reimbursed on production of original receipt).
1
-
-
Appliances
-
-
-
Supply, Installation, Testing and commissioning of 43 inch Hotel smart LED TV 4K UHD with following specificationbrbrResolution- 4K Ultra HD (3840 x 2160)brPicture Engine- Crystal processor 4KbrSound output (RMS)-20W (10W x 10W)brViewing Angle (H/V) : 178/178brBluetooth Audio, Smart TV, TV plus, Web browser, Mobile to TV- Mirroring, Wifi direct, Sound Mirroring, Hospitality Home menu 2.0, Hospitality Plug & Play (Easy set-up), Hotel Channel list, Channel menu display, USB cloningbrHDMI-3 minimum,brUSB- 2 Minimum,brEthernet-(LAN)-1 minimumbrDigital Audio out (Optical)- 1 MinimumbrPower Consumption (Max)- 125 WbrWarranty- 3 years
2
-
-
Supply and installation of 10 Ltr capacity Horizontal type storage water heaters of good quality and approved make
2
-
-
Supply of Push button telephone of good quality and approved make with 7 feet long connection cord having RJ11 male connector at both ends
2
-
-
Supply of cordless type 1.0 Litre or nearest higher capacity kettle for guest rooms having stainless steel body inside, concealed heating element,auto cut off & dry boil protection and working on 230V 50Hz AC supply.
2
-
-
Supply of 45 Litre or nearest higher capacity vapour compression type minifridge/minibar working on 240V 50HZ AC supply
2
-
-
EV Charging station
-
-
-
Supply, Installation,Testing and commissioning of 30 kW CCS type 2 with single gun EV charger with all accessories etc complete as required with full warranty for 2 years (Make-ABB, EXicom, Delta)
1
-
-
AMC charges for the EV charging system for three years after warranty period
1
-
-
Supply, installation,testing and commissioning of Electrical panel required for the EV charging system with require switchgears, protection devices safety controls and smart meters for recording consumption
1
-
-
Air conditioning
-
-
-
Supply, Installation, Testing and commissioning of 2.0 TR 5 star rated inverter AC unit along with
refrigerant pipe (Minimum 3 m), control cable (Minimum 3m),drain pipe (minimum 3m), outdoor unit stand, stabilizer etc complete as required at site.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements