Kerala State Electronics Development Corporation Limited Tender

Dry Rubble masonry using quarry stone and cement mortar 1:8 (1 cement:8 fine Aggrigate

Random Rubble masonry using quarry stone and cement mortar 1:8 (1 cement:8fine Aggregate)"

Rcc for plinth beam.

P.C.C. 1:4:8 using 40mm and down graded hard granite broken stone, including cost of all materials of tools and plants, labour etc complete for foundation

DPC/Water proofing

Solid block masonry using pre cast solid blocks ( Factory made) of size 40x15x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1cement : 6 coarse sand) including cost of scaffolding etc. complete

12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand) work innewly constructed area.

Centering and shuttering including for RCC work including strutting propping etc using quality materials of wood sheet steel and MS supports pipe props and removal of formwork after attaining sufficient strength as per direction for all levels of work etc plinth beam

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of gradeFe-500D or more for roof slab,sunshade

Supply and applying Cement primer for newly plastered area

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work, including wall primer single coat.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete(Somany/kajeria/NITCO brand as directed by the client)

Electrical work for ceiling fan, light point and wall fan point and its switches

LED Tube

Ceiling fan

Wall fan

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting

Supply and fixing of Long body bibcock for washbasin

Providing and fixing PVC pipes fittings including fixing the pipe with clamps at 1.00m spacing this including joints of pipe with one step PVC solvent cement and testing of 4"PVC Pipe 4Kgf/cm2

Providing and fixing aluminium work for doors with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) (Door size -1m x 2m)

Providing and fixing aluminium Fabrication work for partion (2.5 X 1.5 Inch thickness)

Providing and fixing aluminium Fabrication work window

Tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections . Laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like light fittings, fixtures, rodent repellent,smoke detectors etc. Gyproc PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit

Providing and fixing Roofing with georoof roofing tiles.truss work including primer and two coat aluminium shade paint.