Kerala State Coastal Area Development Corporation Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SCADC_668680_1Bid Award Id
ViewTender No
ET-71/2023-24Tender Authority
Kerala State Coastal Area Development Corporation Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
4.1.6
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3
coarse sand : 6 graded stone aggregate 40 mm nominal size)
8.86
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
32.43
-
-
5.33.1
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work upto plinth level
32.65
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
183.21
-
-
5.33.2
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement content
as per approved design mix, including pumping of concrete to site of laying but
excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer - in-charge. Note:- Cement content considered in this item is @
330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable
separately.All work above plinth level upto floor V level
55.18
-
-
4.2.5
Providing and laying cement concrete in retaining walls, return walls, walls ( any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts,
struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks,
plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost
of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone
aggregate 20 mm nominal size)
2.41
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
144.78
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
280.78
-
-
5.9.3
Centering and shuttering including strutting, etc. and removal of form for:Suspended
floors, roofs, landings, balconies and access platform
183.04
-
-
5.9.19
Centering and shuttering including strutting, etc. and removal of form for:Weather
shade, Chajjas, corbels etc., including edges
38.5
-
-
5.9.7
Centering and shuttering including strutting, etc. and removal of form for:Stairs,
(excluding landings ) except spiral - staircases)
5.62
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
4078.04
-
-
5.22A.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete above plinth level.Thermo - Mechanically
Treated bars of grade Fe-500D or more
7732
-
-
2.25
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
153.12
-
-
50.2.25.1
Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction
of site Engineer-in-charge
39.5
-
-
50.6.1.7
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
3.05
-
-
50.6.1.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc
complete.
28.95
-
-
50.6.1.8
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc
complete
14.71
-
-
50.6.3.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including
cost of scaffolding complete
6.31
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
758.32
-
-
13.16.1
6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
256.65
-
-
13.10
15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of
neat cement on the rough side of single or half brick wall.
243.62
-
-
5.30
Add for plaster drip course / groove in plastered surface or moulding to R.C.C.
projections.
132.48
-
-
13.43.1
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:Water thinnable cement primer
467.74
-
-
13.83.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile including applying additional coats wherever required to achieve even shade
and colour.Two coats
467.74
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
596.55
-
-
11.41.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by
the manufacturer) with water absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid on 20 mm thick cement
mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement
and matching pigments etc., complete.Size of Tile 600 x 600 mm.
130.83
-
-
11.46.2
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the
joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
15.79
-
-
11.48.2
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout
mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg
of resin per kg). including filling /grouting and finishing complete as per direction of
Engineer-in-charge.Size of Tile 600x600 mm
128.97
-
-
8.12
Providing and laying flamed finish Granite stone flooring in required design and
patterns, in linear as well as curvillinear portions of the building all complete as per
the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick
base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement
slurry and pointing with white cement slurry admixed with pigment of matching
shade including rubbing, curing and polishing etc. all complete as specified and as
directed by the Engineer-in-charge. a. Flamed finish granite stone slab Jet Black,
Cherry Red, Elite Brown, Cat Eye or equivalent.
7.19
-
-
11.37
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be
specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved
make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick
cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with
white cement and matching pigment etc., complete
16.13
-
-
11.36
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be specified by the manufacturer), of approved make, in all colours,
shades except burgundy, bottle green, black of any size as approved by Engineer -in-
Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete.
55.9
-
-
OD33238/2023-2024
Providing and laying industrial grade antiskid tiles of fully vitrified body,300x300mm
with thickness 9mm or nearest with water absorption less than 0.08% and conforming
to IS 15622 of approved make, in all colours and shades, laid on 20mm thick cement
mortar 1:4 (1 cemnet : 4 coarse sand), including grouting the joint with white cement
and matching pigments etc complete
10.8
-
-
8.2.1.2
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias
and similar locations, of required size, approved shade, colour and texture laid over
20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing,
curing, moulding and polishing to edges to give high gloss finish etc. complete at all
levels.Area of slab over 0.50 sqm
2.1
-
-
50.9.1.2
Providing wood work in frames of doors, windows, clerestory windows and other
frames, wrought framed and fixed in position with hold fast lugs or with dash
fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid
for separately) using good quality Pincoda wood
0.04
-
-
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10
mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size)
6
-
-
50.9.3.2
Providing and fixing paneled or paneled and glazed shutters for doors, windows and
clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding paneling
which will be paid for separately, all complete as per direction of Engineer in-charge.
using Pincoda wood
2.64
-
-
50.9.4.2
Providing and fixing paneling or paneling and glazing in paneled or paneled and
glazed shutters for doors, windows and clerestory windows (Area of opening for
panel inserts excluding portion inside grooves or rebates to be measured). Paneling
for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality
Pincoda wood
2.64
-
-
9.117.1
Providing and fixing factory made uPVC door frame made of uPVC extruded
sections having an overall dimension as below (tolerance ±1 mm), with wall
thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with
galvanized brackets and stainless steel screws, joints mitred and plastic welded. The
hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19
mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges
fixed to the frame complete as per manufacturer's specification and direction of
Engineer-in-chargeExtruded section profile size 48x40 mm
20.3
-
-
9.118.1
Providing and fixing to existing door frames24 mm thick factory made PVC door
shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall
thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of
size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles
of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1
mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'
section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm)
wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S.
'U' cleats. The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm
(± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two
places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and
washers, complete as per manufacturer's specification and direction of
Engineer-in-charge( For W.C. and bathroom door shutter).
7.35
-
-
10.5.1
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle
iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings
complete, including applying a priming coat of approved steel primer.Using M.S.
angels 40x40x6 mm for diagonal braces
1.89
-
-
21.1.1.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating
50 micron)
517.06
-
-
21.1.2.2
For shutters of doors, windows & ventilators including providing and fixing
hinges / pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid
for separately)Powder coated aluminium (minimum thickness of powder coating 50
micron)
134.86
-
-
21.3.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness
18.96
-
-
21.3.2
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 5.50
mm thickness
15.72
-
-
21.2.1
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one
side and balancing lamination on other side
62.42
-
-
9.48.1
Providing and fixing M.S. Grills of required pattern in frames of windows etc. with
M.S. flats, square or round bars etc. including priming coat with approved steel
primer all complete.Fixed to steel windows by welding
256.8
-
-
10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete, i/c fixing the railing with necessary accessories & stainless
steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or
the side of waist slab with suitable arrangement as per approval of Engineer-incharge,
(for payment purpose only weight of stainless steel members shall be
considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
150.12
-
-
9.100.1
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not
less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or
shade, with necessary screws etc. complete:125 mm
5
-
-
9.74.3
Providing and fixing bright finished brass tower bolts (barrel type) with necessary
screws etc. complete:150x10 mm
2
-
-
50.9.15.2
Supplying and fixing 300 mm Aluminium aldrop
1
-
-
13.48.2 Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Painting wood work with Deluxe Multi
Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an
under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture
5.94
-
-
13.48.3
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Painting Steel work with Deluxe Multi
Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm
over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and
manufacture
22.74
-
-
17.2.1
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including
flush pipe, with manually controlled device (handle lever), conforming to IS : 7231,
with all fittings and fixtures complete, including cutting and making good the walls
and floors wherever required:W.C. pan with ISI marked white solid plastic seat and
lid
3
-
-
50.17.1.4
Supplying and fixing CP Health faucet good quality including cost of materials and
labour charges etc. complete as per the direction of site engineer-in-charge.
3
-
-
17.7.2
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Wash
basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap
1
-
-
17.7.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require:White Vitreous China Flat back
wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap
2
-
-
18.51.1
Providing and fixing C.P. brass long body bib cock of approved quality conforming to
IS standards and weighing not less than 690 gms.15 mm nominal bore
3
-
-
18.53.1
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS: 893115 mm nominal bore
10
-
-
17.10.1.3
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and
brackets, cutting and making good the walls wherever required:
Kitchen sink with drain board510x1040 mm bowl depth 200 mm
1
-
-
18.50.1
Providing and fixing C.P brass long nose bib cock of approved quality conforming to
IS standards and weighing not less than 810 gms.15 mm nominal bore
1
-
-
17.31
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
1
-
-
50.17.1.3
Supplying and fixing CP Towel rod 60cm or nearest available length including cost of
materials and labour charges etc complete as per the direction of site Engineer-incharge.
3
-
-
18.58.1.2
Providing and fixing PTMT grating of approved quality and colour.
Circular type125 mm nominal dia with 25 mm waste hole
5
-
-
12.41.2
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :
5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm
diameter
17.8
-
-
50.18.8.2.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge.
Concealed work, including cutting chases and making good the wall etc. 20 mm pipe
10 Kgf/ cm2
10
-
-
50.18.8.3.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe
10kgf /cm2
20
-
-
50.18.9.14.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 10 Kgf/cm2 - External work- Exposed on wall
50
-
-
50.18.9.16.2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm
dia 6Kgf/cm2 - External work - Exposed on wall
10
-
-
50.18.9.8.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
10
-
-
50.18.9.18.1
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m
spacing. This included jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 -
External work- Exposed on wall
10
-
-
50.18.9.21
Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Elbow
4
-
-
50.18.9.21.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Bend
4
-
-
50.18.9.21.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 75 mm dia Vent cowl
2
-
-
50.18.9.9.1
Providing and fixing PVC pipes includings jointing of pipes with one step PVC
solvent cement, trenching, refilling & testing of Joints complete as per direction
of engineer in charge.110 mm dia 6Kgf/cm2
30
-
-
50.18.8.9.1
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge. Concealed work,
including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
8
-
-
50.18.9.19.1
Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00
m spacing . This includes jointing of pipes with one step PVC solvent cement and
testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6
Kgf/cm2 - External work- Exposed on wall
10
-
-
50.18.9.22.1
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia Elbow
5
-
-
50.18.9.22.2
Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
5
-
-
50.18.9.22.4
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement- 110 mm dia Bend
5
-
-
50.18.9.22.5
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes
including jointing with PVC solvent cement 110x110x110 mm dia Tee
5
-
-
50.18.9.22.7
Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee
5
-
-
50.18.9.22.8
Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes,
including jointing with PVC solvent cement -110 mm dia Vent cowl
3
-
-
19.4.1.1
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300x300
mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
2
-
-
19.7.1.1
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand)
with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with
cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat
cement complete as per standard design:
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions, total weight of cover and frame to be not less than
38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
1
-
-
51.19.ST4
Supplying and installing ready made PVC Septic tank including the cost of carriage,
trenching, placing at the level below ground level as specified as per the direction of
engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation
of bed shall be paid separately)<br> 4. 35 to 50 flush capacity
1
-
-
19.33
Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100
mm diameter and 1.20 m long complete as per standard design.
2
-
-
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank
:ISI 12701 marked, with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank.
1000
-
-
23.1.1.1
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable
method prescribed in IS: 2800 ( part I), including collecting samples from different
strata, preparing and submitting strata chart/ bore log, including hire & running
charges of all equipments, tools plants & machineries required for the job, all
complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground
level.
All types of soil300 mm dia
20
-
-
23.3.3
Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS :
12818, including required hire and labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal
size dia
20
-
-
OD22626/2023-2024
Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of 6mm stone chips , filling
the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
123.9
-
-
13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work
14.52
-
-
13.71
Lettering with black Japan pint of approved brand and manufacture
840
-
-
OD33346/2023-2024
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and
prepolished, machine cut for inauguration stone, of required size, approved shade,
colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch
ups, including rubbing, curing complete at all levels.
Area of slab over 0.50 sqm
1.3
-
-
16.21
Engraving letters in hard stone
300
-
-
Appendix B : Compound wall
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
30.83
-
-
60.7.1
DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry
with good quality blasted rubble including packing to compactness to lines and levels
cost and conveyance of all materials labour charges etc. complete as per direction of
Departmental officers at site
26.42
-
-
7.1.1
Random rubble masonry with hard stone in foundation and plinth including levelling
up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate
20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse
sand)
14.68
-
-
5.1.3
Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
5.51
-
-
5.9.5
Centering and shuttering including strutting, etc. and removal of form for:Lintels,
beams, plinth beams, girders bressumers and cantilevers
22.02
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
413.25
-
-
50.6.1.2
Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm
or nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc
complete.
20.02
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
206.74
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
206.74
-
-
Appendix C : Front gate
-
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
3.46
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
0.29
-
-
5.1.2
Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size
1.08
-
-
5.2.2
Reinforced cement concrete work in walls (any thickness), including attached
pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc. up tot floor five level excluding cost of centering,
shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded
stone aggregate 20 mm nominal size)
0.64
-
-
5.9.1
Centering and shuttering including strutting, etc. and removal of form
for:Foundations, footings, bases of columns, etc for mass concrete
3.6
-
-
5.9.6
Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts
6.4
-
-
5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more
268
-
-
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
7.61
-
-
13.46.1
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two
or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior
primer applied @ 2.20 kg/10 sqm)
7.61
-
-
10.25.2
Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.In gratings, frames, guard bar, ladder, railings,
brackets, gates and similar works
252
-
-
13.48.3
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
primer as per manufacturers specifications:Painting Steel work with Deluxe Multi
Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm
over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and
manufacture
7.2
-
-
Appendix D : Horticulture
-
-
-
30.2.29.1
Providing Circular Cement Concrete pots of specified size, cast with cement concrete
of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm
nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “
U “ shape) M.S. wires of 3.5 mm dia as per design, including required form
work, finishing with cement punning on exposed surface, curing for specified period
and stacking in required rows & height, all complete as per direction of Officerin-
charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall
thickness of 25.4 mm
50
-
-
30.2.19.1
Edging with bricks laid dry length wise, including required excavation, refilling,
consolidating with hand packing and spreading surplus earth neatly within a lead of
50 m :Common burnt clay F.P.S. (non modular) bricks of class designation 7.5
40.2
-
-
30.2.57.1
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of
unsaverieable material?s as per direction of officer in charge (excluding cast of plant
& water )Cost of plantation per trees plants (for 100 nos.=427.45/100)
20
-
-
OD22666/2023-2024
Supply of tree plant as per the direction of officer in charge.
20
-
-
2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil
0.17
-
-
4.1.8
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4
coarse sand : 8 graded stone aggregate 40 nominal size)
0.17
-
-
13.1.1
12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
8.96
-
-
50.6.3.1
Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm
or nearest available size confirming to IS 2185 part I of 1979 for foundation and
plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of
scaffolding etc complete
1.4
-
-
Electrification -Point Wiring
-
-
-
1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A
30
-
-
1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
19
-
-
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
16
-
-
1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
2
-
-
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
1
-
-
1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block
including connection etc as required.
66
-
-
Sub-Circuit Wiring
-
-
-
1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm
380
-
-
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
30
-
-
1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
70
-
-
1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm
28
-
-
90.12.24.3 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.6 Sq mm
12
-
-
od366638/2023_2024 : Supply and fixing of ferrules on wire for circuit identification, as required (Any make approved by CPWD/KPWD/KSCADC)<br>6sqmm wire
15
-
-
od366409/2023_2024 : Supply and fixing of ferrules on wire for circuit identification, as required (Any make approved by CPWD/KPWD/KSCADC)<br> 4sqmm wire
21
-
-
od366410/2023_2024 : Supply and fixing of ferrules on wire for circuit identification, as required (Any make approved by CPWD/KPWD/KSCADC)<br>1.5 to 2.5sqmm wire
162
-
-
od366411/2023_2024 : Supply and fixing of connector bar (including connection of wires 4 to 10sqmm) for loop circuit connections or as required in an establishment of circuit connection (Any make approved by CPWD/KPWD/KSCADC)<br>16mm
20
-
-
od366412/2023_2024 : Supply and fixing of connector bar (including connection of wires 1 to 1.5sqmm) for loop circuit connections or as required in an establishment of circuit connection (Any make approved by CPWD/KPWD/KSCADC)<br>6mm
50
-
-
od366413/2023_2024 : Supply and fixing of connector bar (including connection of wires 2.5sqmm) for loop circuit connections or as required in an establishment of circuit connection (Any make approved by CPWD/KPWD/KSCADC)<br>10mm
12
-
-
Networking
-
-
-
1.18.2 : Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
120
-
-
1.24.6 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
5
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
13
-
-
1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable
155
-
-
od366414/2023_2024 : Supply and installation of 9U wall mountable Network rack Conforms to DIN 41494 or equivalent standard, Lockable Toughened Glass Door, DIN Standard Slots, Powder Coated, Grey or black colour, made from Mild Steel, (L55 x W45 x H46 cm), power distribution unit, cooling Fan, including screws and other accessories to mount the rack (Make: Dlink or equivalent make approved by CPWD/KPWD/KSCADC)
1
-
-
od366415/2023_2024 : Supply, Installation and Commissioning of RJ 45 CAT 6 Socket modular type, on existing GI/PVC box with cover and base plate (Make: Elleys, Legrand, Indoasian or any equivalent make approved by KPWD/CPWD/KSCADC)
8
-
-
Conduit
-
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
140
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
40
-
-
1.21.5 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.50 mm
10
-
-
90.1.1.1 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.20 mm
250
-
-
90.1.1.2 : Supply and laying medium gauge PVC conduit of the following sizes conforming to IS 9537/1983 Part III in roof slab, jointing the pipes with PVC solvent cement, tying & fixing the conduit firmly with the re-inforcement etc. as required.25 mm
100
-
-
od366632/2023_2024 : Supply and fixing of flexible conduit of the following size, as required - 20mm
4
-
-
od366692/2023_2024 : Supplying and fixing of following sizes of sleeve conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 8mm
10
-
-
Switches and Sockets
-
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
4
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
4
-
-
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
2
-
-
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
1
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in
recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps
modular switch, connection etc. as required. (For light plugs to be used in non residential
buildings).
4
-
-
90.2.1.6 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points
9
-
-
1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
13
-
-
90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator
1
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
4
-
-
90.10.3.32 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator
4
-
-
90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket
3
-
-
1.57 : Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
1
-
-
DB
-
-
-
2.4.3 : Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door
1
-
-
2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door
1
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole
1
-
-
2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
1
-
-
2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
2
-
-
od366609/2023_2024 : Supply and fixing of TP, 25A, MCB Isolator in the existing DB/ Enclosure, as required. Approved make by CPWD/KPWD/KSCADC
1
-
-
2.3.4 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator16 way, Double door
1
-
-
od366618/2023_2024 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required.<br>25A
1
-
-
2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps
1
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
29
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
16
-
-
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
1
-
-
2.24.3 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 8 way, Double door TPN MCBDB
2
-
-
2.23.4 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2For 14 way, Double door SPN MCBDB
1
-
-
2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
2
-
-
Cable
-
-
-
90.12.6.40 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.4 core 10 sq mm
3
-
-
90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp
12
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
-
-
90.12.6.39 : Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.4 core 6 sq mm
3
-
-
90.12.7.39 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 6 sq mm with factory made clamp
22
-
-
od366643/2023_2024 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed aluminium conductor cable of 1.1kV rating<br>4x6 sqmm (20mm)
2
-
-
od366492/2023_2024 : Supply of Cable Tie
50
-
-
od366493/2023_2024 : Supply and installation of 4 sqmm to 16 sqmm. 60 mm long x 12 mm wide x 1 mm thick Copper earthing clips for single compression glands and giving all connections.<br>
4
-
-
90.6.6.3 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm
50
-
-
90.12.10.2 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size
15
-
-
od366594/2023_2024 : Supply, laying and fixing of following DWC pipe on wall surface for the protection of cables with MS clamp 25x3 (painted) <br>50/38mm
5
-
-
Grounding
-
-
-
5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and
providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
80
-
-
5.14 : Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
0.45
-
-
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
80
-
-
90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
8
-
-
Fittings
-
-
-
1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.
4
-
-
90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture
10
-
-
90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.
13
-
-
90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C
13
-
-
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
13
-
-
90.4.8 : Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.
4
-
-
90.5.1.5 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.DC operated remote controlled electric bell
1
-
-
90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
2
-
-
od366521/2023_2024 : Supply and fixing of Led Surface mounted 600*600 mm Luminaire having power consumption not more than 30W and light output not less than 3600 Lumens with System efficacy> 120 Lumen/Watt . Luminaire Housing Shall be made from CRCA body without welding. The Luminaire should be having minimum 50000 Burning hours(L70B50) with CRI ≥80, SDCM<5 and Co-related color temperature (CCT) of 6500K.The luminaire must have 4KV surge protection integrated in driver, PF≥0.95, Total harmonic distortion THD≤10%, Operating voltage range 140-270V. Luminaire and driver shall be separately BIS approved of same make equivalent to Philips / Wipro /Osram or equivalent approved make by CPWD/KPWD/KSCADC. LM80,LM79 ,Type Test certificate and Bis certificate need to be submitted prior for approvals.
10
-
-
od366525/2023_2024 : Supply and installation of 1HP, single phase 240V, 92mm, star rated, oil cooled, 11 Stage and water Filled Submersible Pump suitable for bore well with 1.1/4", head range of 21M to 60M, Discharge of 100 to LpM, 85LpM @38M including 1HP, control panel with VM, AM, 36µf capacitor, 80-100µf starting capacitor, 2pole contactor and MCB (Model:- Lubi LDS 8HR 11 stage, Kirloskar or equivalent make approved by CPWD/KPWD/KSCADC
1
-
-
od366526/2023_2024 : Supply, Installation and Commissioning of water purifier (table top model) With inbuilt UV+RO purification and HOT-NORMAL option with the features 1) Duel filtration prior to purification(spun catridge and ac carbon) 2) Duel purification with UV plus Reverse Osmosis to treat hard water 3) Faucets-2 to deliver purified normal and hot water. 4) TANK MAKE: 304 S.S(for all tank) all tanks<br>are SS 5) Body : Special grade 202 SS/304 0.8 mm 6) Heat temperature:50oC-80oC 7) Warranty: One year from the date of installation (Make: Chris SPARKLE- 30 NH, Blue star or equivalent make approved by CPWD/KPWD/KSCADC)
1
-
-
od366527/2023_2024 : Supply and Installation of 150mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C. (Any make approved by CPWD/KPWD/KSCADC
3
-
-
od366528/2023_2024 : Supply and laying of HDPE pipe of size 1 1/4" 6kG in the existing RCC/Hume/Metal pipe/ DWC pipe as required.including giving end connections (Hycount or any equivalent model approved by PWD/KSCADC)
30
-
-
od366529/2023_2024 : Supply and installation of water proof submersible tape 1inch X 1feet
3
-
-
od366531/2023_2024 : Supply and tie of Nylon submersible rope (12mm) for hanging the submersible pump in an open well
35
-
-
od366532/2023_2024 : Supply, installation and commissioning of 9W, 240V LED Bulb (PWD approved make)
4
-
-
od366533/2023_2024 : Supply, installation and commissioning of Exhaust fan having 225mm sweep in plastic frame body working on 240V AC supply on wall, giving proper connection and dressing of the cable with all necessary accessories.
1
-
-
od366534/2023_2024 : Supply and fixing Bulk-head light fittings of reputed company make, with clear/froasted glass cover, pvc base suitable for 9 watt LED bulb,including bulb, and giving all connection with suitable three core wire etc. complete.
13
-
-
od366535/2023_2024 : Supply and installation of 18W 6500 CCT(K) LED recessed open/ false ceiling down lighter with pressure die cast aluminium housing for effective thermal management and high transmission factor PMMA diffuser. Modal wipro LD90-111-XXX-65-XX or equivalant Bajaj/ Crompton/ Philips brands.
6
-
-
od366537/2023_2024 : Supply of LED Batten 10W, 2 feet LED lighting fixture - Mirror Lamp with extruded Aluminum heat sink, environmentally friendly, energy efficient prewired with lamp, AC 230V, ISI marked. Make: Philips model No. BN021C LED 12S-6500 or equivalent in other makes as specified in the list of manufacturers complete all as specified
1
-
-
od366538/2023_2024 : Supply and installation of outdoor type 3W LED up wall light (high quality), warm/cool day light with IP65 rating. (Make :- luker LODARCS-3D LED wall light or equivalent make approved by CPWD/KPWD/KSCADC)
3
-
-
od366693/2023_2024 : Supply and fixing of 8 Watts Up-Down LED Outdoor Waterproof IP65 Exterior Wall Step Light Fixture Waterproof Lamp (Warm White, Black Body) 8 Watts (Approved make by CPWD/KPWD/KSCADC)
4
-
-
od366596/2023_2024 : Supply, installation, and commissioning of 1.4kva Home UPS Single phase in and out including Tubular battery 12v 100Ah x 2 nos Exide/Amaron/Tata, 6 EL C10 3 hours backup. with indoor (IP20) Nominal Voltage 220 / 230 / 240 Vac with voltage regulation, frequency regulation, pure sine wave output, overload protection and short circuit protection. Having an efficiency of >85% with LED/LCD display, 0.8pf and warning alarm. Back up time of 2-3hours. (Numeric/APC/GE make)
1
-
-
1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
24
-
-
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
100
-
-
Energhy Meter
-
-
-
od366684/2023_2024 : Supply and installation of weatherproof three phase Energy meter fiber box with provision for HRC fuses - 3Nos., Neutral Link - 1No. and a 4P isolator. Double Door. Including all accessories for installation.
1
-
-
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
1
-
-
od366687/2023_2024 : Supply and installation of following HRC fuse holder with HRC fuse link inside panel board/ energy meter box, any make approved by CPWD/KPWD/KSCADC<br>40A
3
-
-
od366688/2023_2024 : Supply and installation of following 2 Way neutral links mounted on DMC/SMC base in panel board/ Energy meter box. Any make approved by CPWD/KPWD/KSCADC<br>40A
1
-
-
Fire and Safety
-
-
-
od366689/2023_2024 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision.
1
-
-
od366690/2023_2024 : S/F DCP fire extinguisher (5Kg): supply and installation of 5kg Dry chemical power type (DCP) fire extinguishers having ISI mark along with mounting supports etc.as required.
2
-
-
od366691/2023_2024 : Supply and providing First Aid Box with first aid medicines and accessories. Color: Red & White, Size:11Inch * 13 Inch * 3 Inch (W x D x H). Made from galvanize Metal with 7 Way Processed Powder Coating for Long Lasting. Front Heavy Clear acrylic. 4 Partition for medicines organize with lock and 2 set of key. Top side handle for carry to any where and also Wall Mountable.
1
-
-
Supply and installation of Split Air conditioner (Optional)
-
-
-
od366698/2023_2024 : Supply, Installation and Commissioning of 1.5 Ton 5 Star Convertible 5 in 1 Cooling Inverter Split Air Conditioner including mounting stand with the following specifications. Variable speed compressor which adjusts power depending on heat load. Fix & Lock 5 in 1 Convertible cooling mode to run your AC at 5 different capacities as per the desired comfort. 5 Star. Annual Energy Consumption: 770.98 units. ISEER Value: 5.02, Voltage/Frequency-230 V / 50Hz, Cooling Rated Power Input -1315 Watt, the star rating is as per new BEE guidelines effective from 1st July 2022. Copper Condenser Coil. Noise Level: 30.8(db) Ambient Temperature: 54 degrees Celsius. 100% Copper, Comfort Sleep, Auto Restart with Memory Function, Turbo Cooling, Evaporator Fins-Hydrophilic-Blue, Special PCB Metal Enclosure (Make: Bluestar IC518YNU, White or equivalent make approved by CPWD/KPWD/KSCADC)
1
-
-
od366699/2023_2024 : Supply and installation of Voltage stabilizer suitable for single phase 1.5T split Air conditioner. Voltas/V guard/ equivalent
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements