Kerala Police Housing And Construction Corporation Limited Tender

21.1.2.2: For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

25.1: Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account).

od369027/2023_2024: Providing and fixing L shaped modular work station of size 1800mmx1700mm in length, and width of 750mm(600mm+150mm projection ) in longer side and 600 mm in shorter side, 750mm height up to writing platform (including bush of 40mm thick) using good quality Pr-laminated MDF board with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),with two drawers, one closed compartment and two open compartment (size as per the drawing) using 18mm thick MDF, fitted with SS telescopic drawer, SS fancy handle(Ebco/ Hafele/Hettich), Auto close hinges ,Multi purpose locks (Ebco/ Hafele/Hettich), fix 2mm and 0.45mm thick PVC edge band on all cutting edge, provide a full length foot rest in front side only using Aluminum rectangular section of c/s -50mm*25mm (0.583kg /m). Raceway are to be provided at desired position in the work station for electric, network and telephone supply etc.The rate shall be included cost of drawers, compartments, Foot rest, key board tray ,CPU holder, etc. as per drawing and specification and also include all fittings and all conveyance charge etc.as per the direction of Engineer in charge.

od369028/2023_2024: Providing and fixing modular a work station of size 1300mmx750mm ( front side 600mm+150mm projection ),750mm height (including bush of 40mm thick) using good quality MDF board of Pr-laminated withbrdecorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferablebrbrands Action tesa/green panelmax),have to provide two drawer(500mmx160mm, 300mmx120mm, 1 closed cabinet 300mmx360mm)using 18mm thick MDF,SS telescopic drawer,SS fancy handle(Ebco/ Hafele/Hettich),Autobrclose hing,Multi purpose lock(Ebco/ Hafele/Hettich). use 2mm and 0 .45mm thick PVC edge bandbron exposed edge surface,a,provide a foot rest of full length in front side only using Aluminum rectangularbrsection of c/s -50mm*25mm (0.583kg /m). Raceway are to be provided at desired position on the frame(belowbrand above work surface) for switching the switch,sockets,data cables.The rate shall be included cost ofbrproviding two drawers, one closed cabinet, Foot rest, key board try,CPU holder, etc. as per drawing and specification and alsobrinclude all fittings and all conveyance charge etc

od369029/2023_2024: Providing and fixing modular L shaped work station of size 1500mmx1500mm inbrlength, and width of 750mm( front side 600mm+150mm projection ) and 600 mm other side ,750mm height upbrto writing platform( including bush of 40mm thick) using good quality MDF board of Pr-laminated withbrdecorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferablebrbrands Action tesa/green panelmax),have to provide three drawer (2 no400mmx139mm and 1 no-br400mmx360mm)using 18mm thick MDF,SS telescopic drawer,SS fancy handle(Ebco/ Hafele/Hettich),Autobrclose hing,Multi purpose lock(Ebco/ Hafele/Hettich) above the working platform a partition wall as pin upbrboard of same material at a height of 450mm at one side with respect to the orientation of workstation,with abrfile rack (size of partition 300mmx300mm)of capacity to hold four no. of file in vertical at one end to bebrprovide. cumulative height of 1200mm up to top of pinup board. use 2mm and 0 .45mm thick PVC edge bandbron exposed edge surface,a,provide a foot rest of full length in front side only using Aluminum rectangularbrsection of c/s -50mm*25mm (0.583kg /m). Raceway are to be provided at desired position on the frame(belowbrand above work surface) for switching the switch,sockets,data cables.The rate shall be included cost ofbrproviding three drawers,Foot rest, key board try,CPU holder, etc. as per drawing and specification and alsobrinclude all fittings and all conveyance charge etc

od369030/2023_2024: Providing and fixing shelves , using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm and 8 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax),with 4 closed cupboard of size 500mmX500mm height of 500mm. with 2mm and 0.45mm thick PVC edge band on exposed surface. The rate including costbrof SS auto close (soft type) hinges,SS multi purpose locks, SS fancy handle etc.(Preferable brandsbrEbco/Hafele/Hettich) as per drawing and specification and also include all fittings and all conveyance chargebretc.

9.157.2: Providing and fixing Pre-laminated medium density fibre board IS:14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I MDF Board 25mm thick confirming to IS:14587.

9.156.1: Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade -I MDF Board 12 mm thick confirming to IS:14587.

9.90.2: Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm

od369032/2023_2024: Providing and fixing 12 mm thick frame less toughened glass partition of approvedbrbrand and manufacture, including providing and fixing top & bottom with aluminum sections, fixing arrangement and making necessary holes etc. for fixing required partition wall, allbrcomplete as per direction of Engineer in charge

od369033/2023_2024: Providing and fixing stainless steel good quality tubular handle of diameter 30 mm with SS screws etc complete as per direction of engineer-in-charge.

21.1.1.2: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.1: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.15.2: Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium

10.16.1: Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od369034/2023_2024: Providing and fixing fabrics polyester Zebra blinds including all fittings and conveyance charge as per the direction of Engineer in Charge

od369035/2023_2024: Providing and fixing 4mm thick ACP, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.

od369036/2023_2024: providing and fixing frosted sticker glass film on partition glass with pressure sensitive type clear colour adhesive, Class A-ASTM E84 ,film thickness 1 mm minimum with mat surface finish as per the approved design and pattern, as per the direction of Engineer in charge

od369037/2023_2024: Supplying and Fixing of Reception Table to shape and size as per the drawing attached, the table shall be made up of 18 /19mm thick BWR plywood for vertical and horizontals all exposed surfaces shall be finished with approved shade 1mm thick laminate and all other recessed surfaces shall be finished with sealer polish including cost and conveyance of all materials to site, all labour charges, all taxes etc complete for finished item of work as directed by the Engineer - in - Charge

od369038/2023_2024: " Name board brProviding and fixing 25mm thick plywood with laminate finish with brushed metal finish SS name plate as per design intent. Provide 50mm high black acrylic sticker on SS name plate and 50mm high acrylic letters on Plywood. Including cost and conveyance of all materials labour charges etc. Size of board 150x450x25mm 30x130x25mm , SS plate 120x450 mm"br

od369039/2023_2024: Engaging coolie for arranging furniture and cleaning rooms

od369041/2023_2024: Installation of water purifiers for filtering borewell water( ISI BRAND 3000LPH) Including all charges to complete as per direction of Engineer in charge br