Calicut University Tender

26.3 : Providing & fixing in position Phenol bonded Bamboowood wall cladding at allheight with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mmwide (minimum), in approved colour, texture and finish, having PerformanceAppraisal Certificate (PAC) issued by Building Materials & Technology PromotionCouncil (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5nos in each tile to frame work made of second class teak wood of size 20x15 mmin centre of each tile and bottom and top of work height, 40x15mm placed at endsof each tile. The cladding shall be laid over backlayment of 1.00 mm thick expandedpoly ethylene foam of density 40kg/cum in two layers, first layer on wall surfacebefore fixing wooden frame and second layer on frame under cladding. Thebomboo wood planks shall have minimum density of 1000 Kg/cum & minimumHardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction ofthe Engineer in-charge.

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides