Rural Drinking Water And Sanitation Department Tender

RWS4 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand)

RWS5 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead and lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications.Mix 1 2 4 Using 20 mm nominal size graded crushed coarse aggregates Mix 1 2 4 Using 20 mm nominal size graded crushed coarse aggregates

RWS6 - Filling available excavated earth (excluding rock) in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m.

RWS7 - Providing Flush Ruled pointing Pointing on stone work with cement mortar 1 3 (1 cement 3 fine sand) after raking joints to depth nicely lining including cost of materials labour curing as per specifications and as per directions of Engineer in charge.

RWS8 - Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications.. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

RWS9 - Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. h) Buildings

RWS10 - Providing and laying Vitrified tiles with thickness 9 10 mm in different sizes with water absorption less than 0.08 Percent and conforming to I.S. 15622 of approved make in all colours and shade over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand) jointing with grey cement slurry and 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 600x600 mm

RWS11 - Electrification charges including BESCOm Deposite and erection of Name board as per direction of Engineer in charge( Specifications enclosed separately)

RWS12 - Providing Fabrication and construction of PUF Cabin Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.

RWS13 - External wall insulation with Polyurethane Foam (puf) Spray . Providing and fixing cast in situ polyurethane foam (PUF) spray 50mm thick average with PU foam spray density 35 5 kg m3 for external wall insulation including necessary adhesive etc. complete with all lead and lift transporation charges loading unloding charges all taxes cost of all materials. labour HOM complete as per direction of engineer incharges of the work.50mm thick for side wall

RWS14 - External wall insulation with Polyurethane Foam (puf) Spray . Providing and fixing cast in situ polyurethane foam (PUF) spray 50mm thick average with PU foam spray density 35 5 kg m3 for external wall insulation including necessary adhesive etc. complete with all lead and lift transporation charges loading unloding charges all taxes cost of all materials. labour HOM complete as per direction of engineer incharges of the work.40mm thick for roofing

RWS15 - Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling C.P. brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge. (Glazing paneling and dash fasteners to be paid for separately) For Fixed Portion Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials labour usage charges of machinery complete as per specifications

RWS16 - Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge. (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness (weight not less than 12.50 kg m2) including cost of materials labour usage charges of machinery complete as per specifications.

RWS17 - Water purification plants Providing Installation and Commissioning of automatic Water purification plant (RO UF) with all accessories piping product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material loading and unloading and as directed by the Engineer in charge. (Ref detailed specification enclosed seperatly). Note 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI NFS standardswith BSI NFS mark. 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note Refer the ANNEXURE F for Detailed Specification of Each components including cost of material loading and unloading including operation and maintenance for 2 years as per the detailed Technical Specifications

RWS18 - Name Borad Providing and fixing board displaying information such as Name of work Tender cost Name of Contractor Work completion and liability period etc having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border messages symbols etc. with approved colour shade paint complete on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1 4 8 concrete block of size 60 cm x 60 cm x 75 cm including excavation refilling transportation and labour etc complete. Spec. No. As directed by Engineer in Charge and MoRTH specification 804

code04 - test description code04