Rural Development And Panchayat Raj Department Tender

code04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with (PWD SR 2021-22 Vol-2, 1.No. 5.1.

code05 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work (PWD SR 2021-22 Vol-2, L.No. 6.2) .

code06 - Providing 20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) to brick/stone masonary including1.050.60rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.PWD

code07 - Providing 12mm thick plaster in single coat with cement mortar 1:6 to brick masonry / concrete surface including rounding off commers whenever required smooth rendering Providing and removing scaffolding including cost of materials, labour, curing complete as per specifications

code08 - Providing and laying in position reinforced cement concrete of Design mix M20 with OPC cement@320kg with 20 mm and down size graded granite metal coarse aggregates @0 69 cum and fine aggregtes 00 cum, with super plasticisers @ 3 liters confirming to IS 9103-1999 reafimed-2008 machine moved, concrete taid in layers not exceeding 15 cm thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, column pillars, posts, struts, buttresses bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing complete but excluding cost of reinforcement as per specificationsM20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD SR 2021-22 Vol-1, I No.2.2.1.

code09 - Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500

code10 - Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specificationsPWD SR 2021-22 Vol-3, 1.No. 16.4)

code11 - Collection and Filling of Stone aggregate for filter media 40 Complete as per the instructions of Engineer in charge

code12 - collection and Filling of Stone aggregate for filter media. 20 mm aggregate (including Complete as per the instructions of Engineer in Charge at site

code13 - Construction of Embankment with Material Gravel/Murrum. Construction of embankment with approved material Gravel/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications (including cost of gravel murrum, watering charges & compaction by vibratory roller to 95 % of Proctors density) MORTH Specification No. 305

code14 - Providing and installing at site of work P.V.C pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour and lift charges, handling charges including encasing the pipe alround to a depth not less than 15 cms with gravel or selected earth available from the excavation etc complete for PVC PIPESof 4 kf/cm2 110mm

code15 - Fabricating, supplying & erecting MS. angular Truss of span upto 10m. The bottom & top member is provided with 50x50x6mm double equal angles, welded back to back and in between top & bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No CBS/ SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by using 4 Nos of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate The work includes cutting straightening, placing in position of MS angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding& erection equipments, etc, complete as per specification (Etimate-1 Qty= 119.20 Etimate-2 Qty= 119.20 ,Etimate-3 Qty= 119.20 Etimate-4 Qty= 119.20 )

code16 - screening

code17 - plantation

code18 - name board