Rural Development And Panchayat Raj Department Tender

code04 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification(PWD SR-2023-2024, P.No-18, I-2.11(h))

code05 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works ohter than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical speciications, including setting out shorting strutting barricading caustion lights removal of tups and other deleterious matter indluding dressing of excavated surfaces desposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50m and lift upto 1.5m including cost of labour tools usage of machninery & other appurtenances required to complete the work

code06 - Providing laying spreding and compactine stoe aggregates of specific sizes to water bound macadam specification including spreding in uniform thickness, hand packing, rolling with smoothe wheel roller 80 100 kn in stages to proper grade and camber applying and brooming stone screening/binding materials to fillup the interstices of couarse aggregate watering and compacting toe the requred density gradeing 2 as per technical specification clause 405

code07 - Providing and constructin un reinforced plain cement concrete pavement, thikness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M20 coarse and fine aggregates conforming to IS 383 maximum sie of coarse aggregate not exceeding 25mm mixed in a concrete ixed of not less than 02m3 capacity and appropriate weigh batcher sing approved mix design laid in approved fixed side formwork ( steel channel laying and fixng of 125 micron thick polythene filem widges steel lastes including levelling the formwork as per drawing) spreading the concrete with shovels rakes copacted using needle screed and plate vibrators and finished in continuous operation including construction joints primer sealnat curing of concree slabs for 14 days and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead lifts loadig & unlodiang charges cost and conveyance of all materials labour equimpents etc., complete as per the direction of the Engineer-in-charge of the work

code08 - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm X 450 mmX 600mm, 600 mm below ground level as per drawing and Technical specification clause 1701( P No.84- 10.2-2) 600mm x 600mm square