Rural Development And Panchayat Raj Department Tender

PREDSGR04 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. [PWD SR Volume-1 P No. 7 I No.1.9] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR05 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.2.1.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesm ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR06 - providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in ayers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Plinth ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR07 - Column ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR08 - Lintel, Beam, Slab ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR09 - Chejja ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR10 - Cill ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR11 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. [PWD SR Volume-2 P No. 14 I No.6.8] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR12 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge [PWD SR Volume-2 P No. 41 I No.8.3.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR13 - Providing and applying white cement based putty of averagethickness 1 mm, of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smoothcomplete as per specifications and as per directions of Engineer incharge.. [PWD SR Volume-2 SR P No. 41 No.8.59] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR14 - Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) [PWD SR Volume-2 P No. 84 I No.11.32] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR15 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. [PWD SR Volume-2 P No. 75 I No.11.5.1] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR16 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usagecharges of machinery complete as per specifications... [PWD SR Volume-2 P No. 75 I No.11.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR17 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR18 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. [PWD SR Volume-2 P No. 88 I No.11.37.1] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR19 - Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in- charge. 10 x 80 mm including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge. ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR20 - Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications [PWD SR Volume-2 SR P No. 64 I No.9.34 ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR21 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. [PWD SR Volume-2 SR P No. 57 I No.9.11] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR22 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge[PWD SR P No. 46 I No.8.33.1] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR23 - 1.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting thesame with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, [PWD SR P No. 48 I No.8.39] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR24 - Supplying heavy gauge PVC conduit pipe ...... mmdia..........mm thick confirming to IS 2509 with suitable sizebends, metal/PVC Junction boxes, adhesive paste etc., andrunning before concreting the slab. The conduit should be tiedto the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be coveredusing PVC end enclosures, run with 18SWG GI fish wirewherever necessary[PWD ELE SR P No. 47 I No.1.2]19/20 mm dia 2 mm thick ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR25 - Supplying and fixing PVC/metal conduit Deep junction box 1.5.1 19/20 mm deep Junction box[PWD ELE SR P No. 47 I No.1.2]19/20 mm dia 2 mm thick ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR26 - Supplying and flush mounting teak wooden box without frontplank, made of not less than 12 mm thick wood, after duegroove cutting, finishing with necessary cement plasteringcomplete[PWD ELE SR P No. 47 I No.1.2]4" x 4" x 3" ( 101 x 101 x 76 mm) ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR27 - Supplying And Fixing Metal Fan Box with Round Hook.[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR28 - Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outletShort point upto 3m from tapping point to out let via switch..[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR29 - Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-694:confirming to latest amendments..1.5 mm2 .[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR30 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box4 Module .[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR31 - supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293.3.6.1 6A One Way Switch .[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR32 - 6A Three Way socket Each ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR33 - 16A One Way Switch ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR34 - Supplying 6A flush type socket and 6 A flush type SP switcheither surface/flush mounting in existing gang box or in 4mmthick plastic sheet and fixing over a flush mounted wooden boxand wiring using necessary capacity wires as required as per IS1293 and IS 36543.1.1 6A 2 Way .[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR35 - Supplying & fixing retrofit type-PL LED Lamp W LEDlinear source with CCT 6500 degree K, CRI 70. efficacy 80 lumen per W, life 25000 burning hours andCompliance to IS 10322 IEC 60598, LM 79 & LM 80.The LED are driven by HF electronic driver integrated in thesystem, with PF 0.95, power loss should 5 of lampWage short circuit & open circuit protection to be integratedin the circuit, THD less than 20%, Life as per LM 79. Theoperating input voltage should be between 130 to275 V.Tested by NABL/CPRI accredited laboratory with 2 yearsWarranty against any manufacturing defect working understandard electrical condition.11.2.1 8 9 W. ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

PREDSGR36 - Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.IS1293 48" Sweep (1200 mm) Regular model.[PWD ELE SR P No. 47 I No.1.2] ---- Complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead