Rural Development And Panchayat Raj Department Tender

code04 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 4 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Vol 02 P No 41 I No 8 4 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code05 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 4 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Vol 02 P No 42 I No 8 5 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code06 - Providing and laying in position Reinforced cement concrete for all Foundation works The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers well compacted using needle vibrators including all lead lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications The cost of steel reinforcement formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Vol 1 P No 15 I Nl 2 2 1 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code07 - Providing and laying in position Reinforced cement concrete for all Foundation works The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers well compacted using needle vibrators including all lead lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications The cost of steel reinforcement formwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Vol 1 P No 15 I Nl 2 2 1 1 Shuttering For Beams with all lead lifts, loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code08 - Providing Thermo Mechanically Treated bars of grade Fe 500D or more Steel reinforcement for RCC work including straightening cutting bending placing in position binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material labour usage charges complete as per specifications The laps and wastages shall not be measured separately Vol 02 P No 84 I no 11 32 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code09 - Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complete Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Vol 02 P No 81 I no 11 16 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code10 - Providing and laying Polished Glazed Vitrified tiles in floor with different sizes thickness to be specified by the manufacturer with water absorption less than 008 and conforming to IS 15622 of approved brand manufacturerin all colours and shade laid with cement based high polymer modified quick set tile adhesive water based conforming to IS 15477 in average 6 mm thickness including grouting of joints Payment for grouting of joints to be made separately Size of Tile 600 600 mm PWD SR 22 23 P No 62 I No 9 22 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code11 - Providing fixing factory made PVC Door frame of size 50 47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet metered cut at corners jointed No s of 150mm long brackets of 15 15mm M S Square tube the entire door frame to be reinforced with 19 19mm MS Square tube of 19 gauge The door frame to be fixed to the wall using M S Screws of 65 80mm size complete as per manufacturers specification direction of Engineer in charge Vol 02 P No 155 I No 12 54 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code12 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer in charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam Vol 02 P. No.156 I. No.12.55.2 with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer incharge of the work.

code13 - Providing fixing 455 610mm cast iron cover with frame weight to be not less 38kgs weight of cover 23 kgs and weight of frame 15 kgs and necessary locking arrangements with M S flats 32 6mm etc painting with two or more coats with black Japan paint etc complete as directed by the engineer in charge PWD SR V 5 2021 22 P No 210 C No 20 I No 3 V010C with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code14 - Supplying water storage tanks made of virgin polymer LLDPE with two layers outer Black or Blue and inner White layer of approved quality and make conforming to I S I ISO SSI specifications PWD BGM SR 2018 19 P No I No 37 58 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code15 - Supplying PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type with all labour with all lead lift including encasing the pipe alround to a depth of not less than 15 cms with soft gravel or selected earth available from the excavation etc complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc M010A PVC pipes 25mm dia 10 kg sqcm class 5 RDWS SR 2021 22 C No 12 I No 1 1 M010A Vol V with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code16 - Supplying PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type with all labour with all lead lift including encasing the pipe alround to a depth of not less than 15 cms with soft gravel or selected earth available from the excavation etc complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc PVC pipes 63mm dia 6 kg sqcm class 3 RDWS SR 2021 22 C No 12 I No 1 4 M010D Vol V with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code17 - Supplying PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type with all labour with all lead lift including encasing the pipe alround to a depth of not less than 15 cms with soft gravel or selected earth available from the excavation etc complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc PVC pipes 110mm dia 6 kg sqcm class 3 RDWS SR 2021 22 C No 12 I No 1 7 M010G Vol V with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code18 - Providing and fixing unplasticised PVC connection pipe with brass unions15 mm nominal bore PWD SR V2 2021 22 P No 116 I No 13 8 1 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code19 - Providing and fixing brass stop cock of approved quality 15 mm nominal bore PWD SR V 2 2021 22 P No 115 I No 13 3 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code20 - Providing and fixing white vitreous china water closet squatting pan Indian type Orissa pattern W C pan of size 580 440mm Vol 02 P No 126 I No 14 13 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code21 - Providing and fixing white vitreous china flat back half stall urinal of size 580 380 350mm with white PVC automatic flushing cistern with fittings standard size C P brass flush pipe spreaders with unions and clamps all in C P brass with waste fitting as per IS 2556 C I trap with outlet grating and other couplings in C P brass including painting of fittings and cutting and making good the walls and floors wherever required Range of four half stall urinals with 10 litre P V C automatic flushing cistern Vol 02 P No124 I No 14 5 4 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code22 - Providing fixing fly proof wire gauze to windows clerestory windows doors with M S Flat 15 3mm and nuts bolts complete Galvanised M S Wire gauze with 0 63mm dia wire and 1 4mm aperture on both sides including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Vol 02 P No 84 I No 11 29 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code23 - Providing and fixing M S grills of required pattern in frames of windows etc with M S flats square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows by welding Vol 02 P No 85 I No 11 34A with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code24 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work two coats over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge Vol 02 P No 45 I No 8 25 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work