Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying flooring with burnt stone slabs 10 cms thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with cement mortar 1:3, , including cost of materials, sand, labour, curing complete as per specifications& with all lead and lift. and as per direction of the Engineer in charge of work.

code05 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings & with all lead and lift. and as per direction of the Engineer in charge of work.

code06 - Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work sperechnicalspecifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) on roof 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregate& with all lead and lift. and as per direction of the Engineer in charge of work.

code07 - Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work sperechnicalspecifications. (The cost of steel reinforcement, dowel bars &including centering formwork to be paid separately) For footing2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregate& with all lead and lift. and as per direction of the Engineer in charge of work.

code08 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to completeheworkaspertechnical specifications. (The cost of steel reinforcement & formworkshall be paidseparately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates (P-15 , IT-2.1.2) Common SR 21-22Volume -1

code09 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as perspecifications and as perdirections of Engineer-in-charge.

code10 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm& with all lead and lift. and as per direction of the Engineer in charge of work.

code11 - 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.& with all lead and lift. and as per direction of the Engineer in charge of work.

code12 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, completeas per specifications.& with all lead and lift. and as per direction of the Engineer in charge of work.

code13 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.& with all lead and lift. and as per direction of the Engineer in charge of work.

code14 - Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)& with all lead and lift. and as per direction of the Engineer in charge of work.

code15 - Providing and fixing in position fully panelled shutters for windows with Honne wood stiles and rails of 25mm. thick, 75mm wide in two halves with panels provided with MDF of 18mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures& with all lead and lift. and as per direction of the Engineer in charge of work.

code16 - Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.& with all lead and lift. and as per direction of the Engineer in charge of work.

code17 - Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size completeas per manufacturers specification & direction of Engineer-in-charge& with all lead and lift. and as per direction of the Engineer in charge of work.

code18 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges..& with all lead and lift. and as per direction of the Engineer in charge of work.

code19 - Providing and fixing brass bib cock of approved quality :20 mm nominal bore.& with all lead and lift. and as per direction of the Engineer in charge of work.

code20 - Providing and fixing white vitreous china water closet squatting pan (Indian type)Long pattern WC pan of size 580mm & with all lead and lift. and as per direction of the Engineer in charge of work.

code21 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing of jointscomplete as per direction of Engineer in Charge. External work2 20 mm nominal dia Pipes& with all lead and lift. and as per direction of the Engineer in charge of work.

code22 - Providing and placing on terrace (at all floors levels)polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangements and making necessary holes for inlet outlet and over flow pipe but without fittings and the base support of tank & with all lead and lift. and as per direction of the Engineer in charge of work.

code23 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to worksite with testing of as per instructions of engineer incharge of work andlatest amendments0.50 HP& with all lead and lift. and as per direction of the Engineer in charge of work.

code24 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinations andcuts of pipes wherever ecessary including jointing of PVC pipes andspecials (excluding cost of specials) with jointing of approved type, withall labour with all lead & lift including encasing the pipe alround to a depthof not less than 15 cms. with soft gravel or selected earth available fromthe excavation etc. complete and giving necessary hydraulic test to therequired pressure as per ISS (Contractor will make his own arrangementsfor procuring water for testing) etc. for: 1.5 M010E PVC pipes 75mm dia., 6 kg/sqcm & class 3 & with all lead and lift. and as per direction of the Engineer in charge of work.

code25 - Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. & with all lead and lift. and as per direction of the Engineer in charge of work.

code26 - Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.& with all lead and lift. and as per direction of the Engineer in charge of work.

code27 - 4.17 406 Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.. & with all lead and lift. and as per direction of the Engineer in charge of work.

code28 - 16.27 1501 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work.& with all lead and lift. and as per direction of the Engineer in charge of work.