Rural Development And Panchayat Raj Department Tender

PWD SR2023-24 Vo2 PAGE NO-110 l NO-12.90 - Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Window sshall be provided with 6mm plain float glass, standard hardware & Multi point locking system with touch lock. Wall thickness of frame & sash shall b of 2mm to 2.5mm. Maximum possible size 2419mm x 2200mm. (Thecost is inclusivePWD CSR 2023-24 Volume 2 P.No-110 I.No-12.90

PWD SR2023-24 Vo2 PAGE NO-85 l NO-11.29.1 - Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

PWD SR2023-24 Vo2 PAGE NO-85 l NO-13.34A - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD CSR 2023-24 Volume -2 P.No-85 I.No-11.34A

PWD SR2023-24 Vo2 PAGE NO-125 l NO-.13.50.2 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, forcold water supply including all uPVC plain & brass threaded fittingsThis includes jointing of pipes & fittings with one step uPVC solventcement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes

PWD SR 2023-24 Vo2 PAGE NO-100 l NO12.12 - Providing and fixing in position fully panelled Honne wood shutters fordoors with stiles and rails of 40mm. thick with bottom and lock rails 180mmwide top rail and stiles 100mm wide as per drawing and panels of 25mmthick including cost of materials, labour, usage charges complete as perspecifications. ( excluding cost of fixtures )

PWD SR2023-24 Vo2 PAGE NO-113 l NO14.10.1.1 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required 510x1040 mm bowl depth 250 mm

PWD SR 2023-24 Vol-II P.No-82 I.NO 11.16.2 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge

PWD SR2023-24 Vol-2 PAGE NO-26 ITEM NO-7.38 - Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in charge 0.50 mm( 0.05 ) total coated thickness with zinc coating 120 grams per m2 asper IS: 277, in 240 mpa steel grade, 5to 7 microns epoxy primer on bothside of the sheet and polyester top coat 15to 18 microns. Sheet shouldhave protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12m or as desired by Engineer ncharge. The sheet shall be fixed usingself drilling self tapping screws of size (5.5x 55 mm)with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces,the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. Providing and fixing precoated galvanisedsteel sheet roofingaccessories 0.50 mm (0.05 ) total coated thickness, Zinc coating120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5 to 7 micronsepoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling self tapping screws complete