Public Works Department Tender

Vol 1 Addendum 1 Sl.No1a, Page No:111 - 8 Percentage additionalities for formwork centering and scaffolding for footing vide quantity item no 3 (Vol 1 Addendum 1 Sl.No1a,Page No:111)

Vol 1 Addendum 1 Sl.No9, Page No:111 - 70 Percentage additionalities for formwork centering and scaffolding for Column vide quantity item no 3 (Vol 1 Addendum 1 Sl.No9, Page No:111)

vol-1 ,page no 16 i.no2.5.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates vol-1 ,page no 16 i.no2.5.2

Vol 1 Addendum 1 Sl.No9, Page No:111 - 70 Percentage additionalities for formwork centering and scaffolding for Colomn vide quantity item no 6 (Vol 1 Addendum 1 Sl.No9, Page No:111)

Volume:1, Item No:2.11h, Page No:18 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures(PWD SR 2023-24, Volume:1, Item No:2.11h, Page No:18)

vol-2 ,page no 84 i.no11.25.2 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.vol-2 ,page no 84 i.no11.25.2

vol-2 ,pageno 41 i.no 8.2.1 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.vol-2 ,pageno 41 i.no 8.2.1

vol-2 ,pageno 45 i.no 8.29 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.vol-2 ,pageno 45 i.no 8.29

vol-2 ,pageno 48 i.no 8.40 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.vol-2 ,pageno 48 i.no 8.40

Pwd SR vol-2 ,page No 205 , I No20.76 - Removal of old broken glass panes ( any thickness of size, quality or description ) from wooden frames, glazed with putty or fixed with beads including cost of labour, complete as per specifications. ( Pwd SR vol-2 ,page No 205 , I No20.76)

Pwd SR vol-2 ,page No 205 , I No20.77 - Removal of old broken glass panes ( any thickness of size, quality or description ) from metal frames, glazed with putty or fixed with beads including cost of labour, complete as per specifications ( Pwd SR vol-2 ,page No 205 , I No20.77)

Pwd SR vol-2 ,page No 197 , I No20.3.1 - Renewing glass panes, with wooden fillets wherever necessary Float glass panes of nominal thickness 4 mm (weight not less than 10kg/m²)( Pwd SR vol-2 ,page No 197 , I No20.3.1)

Pwd SR vol-2 ,page No 197 , I No20.2.1 - Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/m²)( Pwd SR vol-2 ,page No 197 , I No20.2.1)

Pwd SR vol-2 ,page No 207 , I No20.104 - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards( Pwd SR vol-2 ,page No 207 , I No20.104)

Pwd SR vol-2 ,page No 85 , I No11.28 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge( Pwd SR vol-2 ,page No 85 , I No11.28)

Pwd SR vol-2 ,page No 85 , I No9.17.2 - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tiles 600x600mm( Pwd SR vol-2 ,page No 85 , I No9.17.2)

Pwd SR vol-2 ,page No 89 , I No11.37.2 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications( Pwd SR vol-2 ,page No 89 , I No11.37.2)