Public Works Department Tender

5.4 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Page 9, Sl No 5.4, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.21.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.11 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Page 18, S.No ,2.11 A, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

6.8 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (Page 14, S.No 6.8, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

11.5.1 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Page 75, S.No 11.5.1 Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

12.86 - Providing fixing of 2-track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm aximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T Ps shall not be made) (Page 111, S.No 12.86, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

11.34b - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (Page 85, S.No 11.34.b, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

145 - Wire mesh 50mm x 50mm size of 3mm wire (Page A14, S.No 145,1 Vol 3) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.2.1.1 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 15, S.No 2.2.1.1, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.1.2 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Page 41, S.No 8.1.2, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.2.2 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Page 41, S.No 8.2.2, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

203 - Chicken mesh for Plastering at columns corners (Page A18, S.No 203, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.19.1 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge (Page 44, S.No 8.19.1, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

9.1 - Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. (Page 59, S.No 9.1, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.22 - Providing lime wash on walls with one coat with lime of approved quality to give an even shade, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Page 44, S.No 8.22, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.54.2 - Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Twocoats as per specifications and as per directions of Engineer in charge. (Page 50 S.No 8.54.2, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.30 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. . (Page 46, S.No 8.30, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.41 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Page 48, S.No 8.41, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

185 - Cement Board (Page A17, S.No 185, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

8.49 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Page 49, S.No 8.49, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

11.25.2 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. (Page 84, S.No 11.25.2, Vol 2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

1.2.2 - Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary- 25mm dia 2mm thick (PWD Electrical SR VOL-06 2023-24 Item No: 1.2.2 P.No.2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

1.3.2 - Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (PWD Electrical SR VOL-06 2023-24 Item No: 1.3.2 P.No.2) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

1.5.2 - Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box (PWD Electrical SR 2023-24 Item No: 1.5.2 P.No.3) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

1.13 - Supplying And Fixing Metal Fan Box with Round Hook. (PWD Electrical SR 2022-23 Item No: 1.13 P.No.4) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.1.2 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out letvia switch (PWD Electrical SR 2023-24 Item No: 2.1.2 P.No.5) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.1.3 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outletLong point above 6m upto 10m from tapping point to out let via switch (PWD Electrical SR 2023-24 Item No: 2.1.3 P.No.5) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.3.1 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 sqmm (PWD Electrical SR 2023-24 Item No: 2.3.1 P.No.5) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

2.3.3 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. - 2.5 sqmm. (PWD Electrical SR 2023-24 Item No: 2.3.3 P.No.5) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

3.1.2 - Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way (PWD Electrical SR 2023-24 Item No: 3.1.2 P.No.8) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

3.4.5 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 8Way (PWD Electrical SR 2022-23 Item No: 3.4.5 P.No.8) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

3.4.6 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 10-12 Way (PWD Electrical SR 2023-24 Item No: 3.4.6 P.No.8) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

3.8 - Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (PWD Electrical SR 2023-24 Item No: 3.8 P.No.9) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

3.6.4 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -Stepped Fan Regulator Two Module (PWD Electrical SR 2023-24 Item No: 3.6.4 P.No.9) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

3.6.1 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. -6A One Way Switch (PWD Electrical SR 2023-24 Item No: 3.6.1 P.No.9) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

1.11 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (Page 7, S.No 1.11, Vol 1) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.

5.18.1 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP (PWD Electrical SR 2023-24 Item No: 5.18.1 P.No.17) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transportation and all other incidental charges etc., complete the work shall be carried out as per standard technical specifications and as per the directions of the Engineer-in-charge of the work.