National Institute Of Technology Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
National Institute Of Technology - NIT Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date10 Jan 2024
Closing Date20 Jan 2024
Tender Amount₹ 16,51,497
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NITK_789625_1Bid Award Id
ViewTender No
Tender No.35/2023-24/HDTender Authority
National Institute Of Technology ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Wiring for Power Circuit : Wiring for power circuit using 2run x 6 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make
420
-
-
Wiring for Power Circuit : Wiring for power circuit using 4run x 6 sqmm + 1 run x 2.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make
105
-
-
Wiring for Power Circuit : Wiring for Light/power circuit using 2run x 10.0 sqmm + 1 run x 2.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make
35
-
-
Telephone cable: Supplying and drawing PVC flexible Two pair telephone unarmoured tinned copper cable. – Make: D Link, Finolex, Polycab- 2 Pair
275
-
-
Open Conduit system: Supplying heavy gauge PVC conduit pipe of 20mm dia. 2 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.
440
-
-
Open Conduit system: Supplying heavy gauge PVC conduit pipe of 25mm dia. 2 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.
330
-
-
PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 25mm size PVC casing and capping.
365
-
-
PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 20mm size PVC casing and capping.
330
-
-
PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 32mm size PVC casing and capping.
140
-
-
Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. Short point up to 3mtr from tapping point to outlet via switch.
18
-
-
Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. Medium point above 3mtr up to 6mtr from tapping point to outlet via switch.
25
-
-
Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. - Long point above 6mtr up to 10mtr from tapping point to outlet via switch
58
-
-
Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 4”x4”x3” size
55
-
-
Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 8”x6”x1.5” size
6
-
-
Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 10”x8”x1.5” size
4
-
-
Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 12”x9”x1.5” size
4
-
-
Hylum plastic sheet 3mm thick: Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches regulators etc., and fixing on existing wood or metal box using N.F. screw as per the specification and direction of the Engineer-In-Charge.
12060
-
-
Power board: Supplying and fixing of power board consisting of 10”x7”x3” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 4 nos of 6 Amps switch,4 nos of 6 Amps 5 Pin socket etc. complete.for UPS -PB-1 - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona
7
-
-
Power board: Supplying and fixing of power board consisting of 10”x7”x3” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 2 nos of 16 Amps switch,2 nos of 16 Amps 5 Pin socket etc. complete.for UPS -PB-2 - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona
46
-
-
Supply and fixing 6Amps SP Switch on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.
24
-
-
Supply and fixing 6Amps 3-way 5-pin Socket on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.
24
-
-
Supply and fixing Electronic Stepped Fan Regulator on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.
11
-
-
Supply and fixing 6A Bakelite Ceiling Rose on existing board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.
22
-
-
Telephone socket board: Supplying and fixing of board consisting of 4”x4” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 1 no. of Telephone socket etc. complete. - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona
9
-
-
LED Batten fitting 0.60mtr (2feet) 9/10W- Supplying of LED light batten fitting with integrated LED high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved 2 years warranty against any manufacturing defect working under standard electrical condition.
6
-
-
LED Batten fitting 1.20mtr (4feet)-20/22W - Supplying of LED light batten fitting with integrated LED high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved 2 years warranty against any manufacturing defect working under standard electrical condition.
18
-
-
Recess/Surface mounting type 36W LED Luinaire: Supplying of recess/surface mounting type modular panel light 2’x2’ 34/36W LED luminaire comprising of pressure decast/extruded luminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
42
-
-
Recess/Surface mounting type 18W LED Luinaire: Supply of round/square recess/surface mounted rolling type LED Down light with 18W panel light Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition.
4
-
-
Fixing fittings: Fixing all types all capacities fluorescent / false ceiling / spot light / CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.
28
-
-
Fixing fittings: Fixing all types all capacities 2x2- 36W LED Luinaire for false ceiling / spot light / CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.
42
-
-
70W LED FLOOD LIGHT: Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 70W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia
6
-
-
Fixing LED floodlight fitting over existing pole / OR any other pipe using required size of reducer, wiring using suable wires. Including clA, bolts, nuts and wiring using suitable capacity wires.
6
-
-
48” Sweep 5 Star [1200mm]-Regular model ceiling Fan: Supplying of ceiling Fan with Capacitor rating as per guideline of BEE 5 star rating and IS 374/79 and also comply with IS: 1709/1984 with latest amendment rated voltage 220V 50Hz, rated power input 48 W +/-10% rated current as per IS 374/79, rated power factor 0.90 lagging(min) Rated speed 350+/- 10% RPM, rated air delivery 210 +/- 10% cubic meter minimum, rated service value 4.2 CMM / W, three blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 as per IS specification, Motor winding Temp rise shall not exceed 75deg C over and ambient of 40 resistance method at 245 v, Insulation resistance shall not be less than two Mega Ohms (2M ohms) Leakage current should not exceed 210 Micro Amp Power input, W & current, Air delivery and Fan speed as per IS :374/1979 with latest amendment with 2 year manufacturer warranty.
11
-
-
400mm Sweep Wall mounting fan: Supplying 400mm sweep copper winding wall mounting fan suitable to operate at single phase 230v AC supply Make: Havells/Usha/Alnonard/Crompton/Polard.
10
-
-
Fixing of Wall mounting fan: Fixing of ceiling / wall mounting fan of all capacities and all types with necessary clamps, angular, / to the existing S hook, with fan regulator, together with supplying and fixing a 5 ampere ceiling rose, necessary length of 23 / 0.0076” PVC insulated twin twisted copper wire and wiring complete.
21
-
-
“S” Hook: Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod.
11
-
-
GI pipe -19mm dia: Extra length of GI pipe of class B – 19mm dia for down rod
16.5
-
-
12” Sweep(300mm) Copper winding Exhaust fan: Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.
3
-
-
Fixing of Exhaust fan: Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
3
-
-
4Way regular MCCB: Supplying and fixing 4way regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.
3
-
-
8Way regular MCCB: Supplying and fixing 8way regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.
1
-
-
Moulded Case Circuit Breaker (MCCB) - Four Pole 125 Amps 25 kA: Supplying and fixing Four Pole 125 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
8
-
-
Moulded Case Circuit Breaker (MCCB) - Four Pole 200 Amps 35 kA: Supplying and fixing Four Pole 200 Amps 35 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
1
-
-
Moulded Case Circuit Breaker (MCCB) - Four Pole 250 Amps 35 kA: Supplying and fixing Four Pole 250 Amps 35 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
1
-
-
12Way SPN double door MCB distribution board: Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.
6
-
-
6-32A DP MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 6-32A DP MCB
29
-
-
63A DP MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 63A DP MCB
3
-
-
63A TPN MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 63A TPN MCB
20
-
-
ELMCB -32A 4Pole: Supplying, fixing and wiring 32A 4Pole Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board etc. complete. Make: Siemens/L&T/Schneider/Havells.
3
-
-
MS angle iron frame work: Supply and fixing 40x40x6mm size MS angle iron frame work for mounting panel board with bolt and nuts, painted with two coats of anti-corrosive enamel paint over two base coats of red-oxide priming coat
22
-
-
AC Panel :Fabricating supplying and mounting MS box made out 16.SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with treatment with powder coated paint and finally finished with approved colour etc., complete.
70000
-
-
Bus bar: Supplying 250A 4x 30x10mm A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.
2.5
-
-
Digital meter with three line back light LCD type Display: Supplying of multi-function Digital meter with three line back light LCD type display for voltage, current, frequency, power , power factor ,KVA, KWH, KVAR suitable for three phase 4 wire, LT network with IP 54 degree of protection and completely wired as required with communication Port and class 0.5s accuracy.
1
-
-
LED type panel board: Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
3
-
-
CT: Supply, fixing and wiring 50/5 to 400/5 amps 5VA burden current transformer. Class 0.5 accuracy with tape wound
3
-
-
MDF krone junction box: Supplying and fixing of 50 pair MDF krone junction box with KRONE, Module / Telephone cable termination.
1
-
-
Supply of LT UG cable - 3.5C X 25 Sq.mm: Supplying of LT UG cable of following size having aluminium conductor PVC insulated sheathed galvanized, XLPE, steel wire / steel strip armoured cable with PVC outer sheathing 1.1KV class (conforming to IS 1554) Class 'A' PVC cables, - 3.5C X 25 Sq.mm.(12 GI strip – 4 x 0.8mm) MAKE: HAVELLS/ UNISTAR/ GLOSTER / POLYCAB / UNIVERSAL / NICCO/ SBEE/ TORRENTO/ CCI - Tropodur make.
80
-
-
Supply of LT UG cable - 3.5C X 50 Sq.mm: Supplying of LT UG cable of following size having aluminium conductor PVC insulated sheathed galvanized, XLPE, steel wire / steel strip armoured cable with PVC outer sheathing 1.1KV class (conforming to IS 1554) Class 'A' PVC cables, - 3.5C X 50 Sq.mm.(16 GI strip – 4 x 0.8mm) -1.1k?V UG cable MAKE: HAVELLS/ UNISTAR/ GLOSTER / POLYCAB / UNIVERSAL / NICCO/ SBEE/ TORRENTO/ CCI - Tropodur make.
300
-
-
Laying UG cable : Labour charges for laying of 25 sqmm size LT cable cable in existing trench / on wall/ stone ware /RCC hume pipe /ceiling using necessary clamps, saddles, screws, bolt and nuts, using Wooden / Aluminum rollers, as directed by the Engineer in charge - 25 sqmm size
80
-
-
Laying UG cable : Labour charges for laying of 50 sqmm size LT cable cable in existing trench / on wall/ stone ware /RCC hume pipe /ceiling using necessary clamps, saddles, screws, bolt and nuts, using Wooden / Aluminum rollers, as directed by the Engineer in charge - 50 sqmm size
300
-
-
Aluminium End Terminal ( lugs ) - 50 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC
12
-
-
Aluminium End Terminal ( lugs ) - 25 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC
25
-
-
Aluminium End Terminal ( lugs ) - 16 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC
6
-
-
25mm size Heavy duty cable glands: Supplying and fixing of following size heavy duty cable glands suitable for UG cable of 1.1KV class ( metal only )– 25mm - Make - Dowel, Mico, Glowstar
6
-
-
40mm size Heavy duty cable glands: Supplying and fixing of following size heavy duty cable glands suitable for UG cable of 1.1KV class ( metal only )– 40mm - Make - Dowel, Mico, Glowstar
6
-
-
Perforated cable tray: Supplying and fixing 2mm thick 300 x 50 mm size perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.
40
-
-
Earth Electrode for grounding: Supplying, fixing and wiring earth electrode for grounding using 42mm dia 3.2mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in CC chamber of 400x400x400mm with cast iron cover and naming of pit. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all round with alternate layers of salt and charcoal from the bottom of CC chamber. The connection from the electrode is to be established through GI strip using bolts and nuts. The ground resistance should be below 100Ohms and earth to neutral voltage should always be less than 1V AC. The earthing test certificate should be produced by the authorised testing agencies.
2
-
-
Copper Strips: Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm copper strip,
20
-
-
40mm dia Class A GI pipe: Supplying and Fixing.0.mm dia class A GI pipe bracket upto 2.7meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires.
6
-
-
Metal box: Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.
6
-
-
20Amps SP&N Metal socket set of 2 pole: Supplying and fixing of 20Amps SP&N Metal socket set of 2 pole and earth plugs and socket for incorporating 32A DP MCB. The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. Make :- Legrand / L&T / Havells / HPL / ABB
21
-
-
Engaging labours: Engaging labours for dismantling, removing existing old wiring, conduits casing, capping, switch boards DB’s, light fixtures, fan, panel boards and other electrical accessories. The work includes necessary labour, tools and plants, safety equipments etc., complete,
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements